HAAS - 2000XL 2.0, ...Mobile ShredderLow Hours; 2018 YMFG.Specifications & Features: -- Can be used at any location (comfortable transport measurements). -- Easy & quick positioning thanks to crawler track and radio remote control. -- Shreds different materials with just (1) tool configuration. -- High throughput capacity of up to 100 tons/Hr. -- Resistant against foreign bodies. -- Low wear cost and long lifetime. -- Service and maintenance friendly. -- No wrappings; self-cleaning. -- Quiet main drive.

HAMMER 2080FFS Loose Pack Line with Bag SealerFeatures: -- Perfect for Free Flowing Material -- Uses V- Plastic Film -- Capacity of up to (25) Bags Per Minute -- Scale Design (no scale)Application: An advanced, reliable system, the Model 2080 forms bags from economical centerfold roll stock film, then fills and seals them accurately at rates up to 30 bags per minute. Vent holes are punched to varying sizes and pattern specifications. Conveyor easily adjusts to accommodate different bag sizes. Microprocessor-controlled operation ensures reliability and consistent performance. Corrosion restraint, heavy-duty construction for ease of cleaning, and long-lasting service.It was running wood pellets previously so no major corrosion issues. The operating manual is included and there are some spare parts including belts, pulley motor etcIt was running wood pellets previously so no major corrosion issues.

HMC - Separator, ...Eddy Current Multi-Separation SystemSpecifications: -- Countering conveyor: 55" x 10". -- Bucket Elevator: 10" x 5'. -- Main motor: 0.37 kW.Equipped with: -- Push button control. -- Carrier with skates.

HURST 600 HP Waste Fired Boiler; -- Specifications:Complete in-place system with the following features: -- Decommissioned July 2019. -- 150 PSI. (300 PSI max wp), -- 20,700 Lbs per hour. -- Fuel House, Boiler Building and all Controls -- System has been "pickled" to maintain tube integrity.

HUSTLER - FC-2, ...ScreenSpecifications: -- OD at the longest point: 104" -- Long at longest point: 122" -- Tall at the tallest point: 65"Equipped with: -- (2) Shutoff switches

600 CUBIC FOOT Stainless Bin With 6’ Diameter Metalfab bin activatorBin is 8’ Diameter X 15’- 4"; Overall height including the bin activatorDesigned for 55 PCF Material Bulk DensityBuilt By Imperial Industries JOB # 4153.Bin Activator built by Metalfab, JOP # J-890109.Bin: 8’ Diameter X 11’ 6"; Straight Side X 14’ height from top of bin cover to flange where bin activator mounts. Bin activator is an additional 46"; Tall.Bin has 360° Mounting support ring with four lugs and has a separate flanged joint. Bin Activator stainless steel with white neoprene beaded sleeve. 3 HP vibratory unit 22/440/.Outlet of Bin Activator is 12" Diameter.

INOTECH 200 HP DUAL BOX SHAVING MILLSpecifications for one system: -- (2) 100 HP Motors -- (2) Boxes 48" x 106" -- (2) Cutter Heads 48" Long with 10 Knives Each -- (2) Slide Out Modules for Maintenance of Knives Cutter Head -- Production Capacity up to 2,000 cu./ft. per hour -- In a Very Good Working Condition -- Loaded on your Truck(2) Complete Systems Available.Price is for one Unit unless otherwise stated.

(1) SET OF JACKSON SHAVING MILLS;COMPRISED OF: -- (1) Jackson Model 30D6 Shaving Mill -- (1) Jackson Model 30D10 Shaving Mill -- Chain Drive 4-1/2 Feet Boxes -- (1) Custom Built 2- Head shaver -- Shaving Discharge Belt Conveyor Under Each Shavers. -- Log Deck -- Log trough conveyor. -- Screen -- Loaded on Truck or Container.

Jackson Double Head Log Shaving Mill;Complete with the following major components: -- Hydraulic Drive Machine. -- 75 HP electric Motor on Shaver Heads. -- 10" diameter Heads with Knife Cartridge Option. -- Soft-starter for 75 HP Motor. -- 30" Bed width. -- Hopper Box Length 54 inches. -- Machine overall length 15'10". -- Hydraulic Power Pack with 15 HP Electric Motor. -- All Current design version. -- Bolt-in bedplates & center plate. -- (1) 24" x 15' discharge Belt Conveyor under machine. -- (1) 24" x 25' moveable inclined Belt Conveyor with Legs & Casters. -- Conventional Starters for Hydraulic Unit & Conveyors. NOTES: &#9679 3-month Parts Warranty &#9679 Kept indoors in heated building. &#9679 Very low hours and in like new condition. &#9679 Motor starters value new at $10,000 and included as stated above.

(3) JACKSON SHAVING MILLS;Complete with the following major components and features: -- (2) JACKSON Model 30D10HLC Shaving Mills with 75 HP on the Shaver Heads. -- (1) Jackson Model 36D10HLC Shaving Mill with 100 HP on Shaver Heads and 25 HP Hydraulic Unit. -- 8 Ft. Log Boxes. -- Shaving Discharge Belt Conveyor under each Shaver. -- Loaded onto your Truck.NOTES: &#9679 Available to purchase as one, two or all three units. &#9679 See video on this listing.

JBF - HD 38/50, ...Hard Disk Drive ShredderSpecifications: --Shredding blades: 1". -- Cutting zone: 14" x 20". -- Hopper opening: 54" x 30". -- Waste bin volume: 240 Ltr. -- Motor power: 4,000 Watt.

JEFFREY - 76 WBH, ...Wood Hog -- Wood Hog with: Fixed, 3-lobe, 6-way hammers. -- It has a top infeed powered chain with air cylinders that feed a 30" x 56" opening. -- Features a 700 HP - 890 RPM direct drive motor and soft start. -- There is an Operator's Console with all the controls. -- Complete with: New set of hammers and a new screen.

JOHNSON LOOSE BAGGING SYSTEMOne Set of (2) Loose Fill Bagging Systems -- Was Bagging Wood Chips in Plastic Bags. -- One Hopper receiving System for the (2) Units -- Two feeding systems -- Complete with Support Legs and Bag Conveyor -- Output Finish Bag Conveyors -- One Unit is Brand New and the Other is in Very Good Working Condition -- Production Rate 6 to 10 Bags Per Minute. -- Could Bag any Type of Free Flowing Material.Price is Loaded on your Truck.

JWC ENVIRONMENTAL Muffin Monster 3-Shred-H-800 Shredder/GrinderSpecifications: -- Model #: 3-Shred-H-800 - Stainless Steel -- Used only two times -- Stainless steel construction -- Alloy steel drive shafts and scrapers -- Cartridge-style tungsten carbide mechanical seals -- Mill opening:Length: 7 inches Width: 9 inches -- 5 HP motor -- Electrical:230 V 60 Hz Phase 3

KAWASAKI FS030L E Palletizing RobotArticulating arm type Palletizing Robot.Specifications: -- Suction cup type "pickup". -- PENDANT 6 AXIS -- Controller Model "D32FD001" -- Capacity: 30 kG (66 Lbs) bags. -- Complete with pendant control station. -- Includes control panel Cabinet. -- Dimension; 98" H x 42" W x 98" L (wooden crate); weight approx. 3,190 Lbs.Loaded on your truckNOTE: (2) Units available!

KAY INDUSTRIES Phasemaster MA-1 5 HP Rotary Phase Converter.Features: 5 HP Largest single motor starting capacity; will run 10 HP total 3-phase machines from 1-phase input voltage. -- 208/230/460 Single-phase input voltage configuration available (please specify upon order). -- Less than 1% harmonic content, greater than 95% Power Factor & Operating Efficiency at full load; Heavy Duty General Purpose Design will operate any woodworking machinery; quiet running (1,800 RPM); produces true three-phase Delta output ideal for CNC equipment. -- The Phasemaster MA-1 provides instant motor reversing; buffered soft-start for three-phase loads which potentially reduce electrical operating costs; allows loads to develop full nameplate power ratings. -- Includes: 5-Year warranty. -- Does not include fuses or switch.Phasemaster MA-1-R includes factory-installed disconnect switch, fuses and terminal blocks in a side-mounted electrical enclosure for additional;...$ 522Optional LSV option for sensitive electronics add...$ 550

KAY INDUSTRIES Phasemaster MA-2, 10 HP Rotary Phase Converter.Features: 10 HP Largest single motor starting capacity; will run 20 HP total 3-phase machines from 1-phase input voltage. -- 208/230/460 Single-phase input voltage configuration available (please specify upon order). -- Less than 1% harmonic content, greater than 95% Power Factor & Operating Efficiency at full load; Heavy Duty General Purpose Design will operate any woodworking machinery; quiet running (1,800 RPM); produces true three-phase Delta output ideal for CNC equipment. -- The Phasemaster MA-2 provides instant motor reversing; buffered soft-start for three-phase loads which potentially reduce electrical operating costs; allows loads to develop full nameplate power ratings. -- Includes: 5-Year warranty. -- Does not include fuses or switch.Phasemaster MA-2-R includes factory-installed disconnect switch, fuses and terminal blocks in a side-mounted electrical enclosure for additional;...$ 588Optional LSV option for sensitive electronics add...$ 638

KAY INDUSTRIES Phasemaster MA-6, 30 HP Rotary Phase Converter.Features: 30 HP Largest single motor starting capacity; will run 60 HP total 3-phase machines from 1-phase input voltage. -- 208/230/460 Single-phase input voltage configuration available (please specify upon order). -- Less than 1% harmonic content, greater than 95% Power Factor & Operating Efficiency at full load; Heavy Duty General Purpose Design will operate any woodworking machinery; quiet running (1,800 RPM); produces true three-phase Delta output ideal for CNC equipment. -- The Phasemaster MA-6 provides instant motor reversing; buffered soft-start for three-phase loads which potentially reduce electrical operating costs; allows loads to develop full nameplate power ratings. -- Includes: 5-Year warranty. -- Does not include fuses or switch.Phasemaster MA-6-R includes factory-installed disconnect switch, fuses and terminal blocks in a side-mounted electrical enclosure for additional;...$ 1,106Optional LSV option for sensitive electronics add...$ 842

KAY INDUSTRIES Phasemaster MA-8, 50 HP Rotary Phase Converter.Features: -- 50 HP Largest single motor starting capacity; will run 100 HP total 3-phase machines from 1-phase input voltage. -- 208/230/460 Single-phase input voltage configuration available (please specify upon order). -- Less than 1% harmonic content, greater than 95% Power Factor & Operating Efficiency at full load; Heavy Duty General Purpose Design will operate any woodworking machinery; quiet running (1,800 RPM); produces true three-phase Delta output ideal for CNC equipment. -- The Phasemaster MA-8 provides instant motor reversing; buffered soft-start for three-phase loads which potentially reduce electrical operating costs; allows loads to develop full nameplate power ratings. -- Includes: -- 5-Year warranty. -- Does not include fuses or switch.Phasemaster MA-8-R includes factory-installed disconnect switch, fuses and terminal blocks in a side-mounted electrical enclosure for additional;...$ 1,546Optional LSV option for sensitive electronics add...$ 847

KAY INDUSTRIES Phasemaster MA-1B, 7.5 HP Rotary Phase Converter.Features: 7.5 HP Largest single motor starting capacity; will run 15 HP total 3-phase machines from 1-phase input voltage. -- 208/230/460 Single-phase input voltage configuration available (please specify upon order). -- Less than 1% harmonic content, greater than 95% Power Factor & Operating Efficiency at full load; Heavy Duty General Purpose Design will operate any woodworking machinery; quiet running (1,800 RPM); produces true three-phase Delta output ideal for CNC equipment. -- The Phasemaster MA-1B provides instant motor reversing; buffered soft-start for three-phase loads which potentially reduce electrical operating costs; allows loads to develop full nameplate power ratings. -- Includes: 5-Year warranty. -- Does not include fuses or switch.Phasemaster MA-1B-R includes factory-installed disconnect switch, fuses and terminal blocks in a side-mounted electrical enclosure for additional;...$ 522Optional LSV option for sensitive electronics add...$ 550