CAM-WOOD RS-660X Radial Arm SawSturdy cast iron frame for saw head and arm.Specifications: -- 4 HP Motor; 4-1/8" cutting depth with 16" dia. blade; 45" max. trimming width x 35" max. crosscut. -- Large 32" x 45" wooden table. -- Magnetic starter and overload protection. -- 0° - 180° Saw head rotation with positive locks on rotating head. Features & Equipped with: -- Saw head that glides on ball-bearings against a hardened steel surface. -- Heavy gauge steel base & legs for solid support. -- Positive locking device for tilting. -- Motor brake, upper & lower blade guards, and anti-kickback attachment. -- Dado Option: Dado capacity 1" wide, 10" blade, 1" bore......... please inquire for extra cost.

CAM-WOOD MODEL TRS-1200TB SLAT RIPPER - (1) Top & (1) Bottom Rip Spindle.The machine can plane or shape the wood on two surfaces and then rip it. Ideal for shutters, louver slats, yardstick blanks, etc.Features: -- Special profile hold down & groove table for slat ripping, optional -- Designed to meet the exacting standards required for high-quality production line use. -- CAM-WOOD’s Slat Rip Saws are manufactured to precise tolerances and feature the newest designs for operator safety and volume production. -- All of these features combine to show what a true value these machines are in today’s highly competitive market. -- Precision fence assures absolute accuracy between cutterheads & fence and is equipped with a measuring gauge. -- Double anti-kickback fingers mounted at the infeed end of the machine provided maximum safety protection. -- Heavy-duty industrial TEFC motor ensures full-depth cutting capacity in all materials. -- Ruggedly constructed steel frame for durability and extended machine life. -- The variable speed feed works allow the machine to meet the cutting requirements of different materials. -- Saw head built to precise tolerances assures accuracy for all straight-line ripping operations and provides a stellar quality of cut. -- Top & bottom powered pneumatically tensioned feed rolls for precise feeding and cutting. -- Saw arbor is manufactured from alloy steel for dependability and anti-fatigue, heat treated, precision ground, and balanced providing precise cutting performance.SPECIFICATIONS: -- 8"; Max. Cutting Width -- 5"; Max. Cutting Depth -- 10"; Min. Workpiece Length -- 4"; to 6"; Dia. Top Spindle Sawblade Size -- 8"; to 12"; Dia. Bottom Spindle Sawblade Size -- 6,000 RPM Top & Bottom Moulder Spindle Speed -- 8"; Spindle Length -- 40 mm Rip Saw Arbor Diameter (with key) -- 10 HP Top Rip Saw Motor -- 15 HP Bottom Rip Saw Motor -- 12 to 60 FPM Feeding Speed (Variable) -- 1/2 HP Feed Roll & Top Head Elevating Motor -- 1/2 HP Rip Saw Arbor Elevating Motor -- 3 HP Feed Motor

CAM-WOOD TRS 150F Frame SawCAM-WOOD Frame Saws are engineered and designed to make extremely accurate cuts, cutting products with very tight tolerances up to 0.004" and often eliminating sanding before proceeding to the next step . The unique thin frame saw design accepts different saw frames, blade combinations, and allows multiple saw fence configurations to produce single, double or multiple cuts in a single pass.Specifications: -- 3/4" Min. to 6" max. working width; 1-1/4" min. to 7-3/4" max. working thickness (height); 7-1/2" minimum length; finished material > 0.1094". -- 0.043" to 0.055" Saw blade thickness; runs up to (22) blades at one time at (450) stroke/minute with a 8-1/4" stroke length; accommodates blades 1.575" wide x 19.685" long. -- Saw blade frame is powered by a 15 HP motor. Feed speeds of 1 to 5 FPM by 1 HP motor. -- Features automatic oil lubrication system requiring 90 PSI air pressure. Cooling system via water and air. -- Minimum kerf multi-blade frame saw designed to maximize production and minimize material losses to kerf. -- Machine supplied with PLC controller to allow operator fast, instant set-up changes. -- All controls are centrally located for the operator to easily adjust & control operation. -- Material waste reductions of up to 20% are achievable by use of the thin kerf blades (0.043" ~ 0.055"). -- A special air blast system cools the blade for longer service intervals and removes saw dust from the gullet of the blade to reduce temperature and increase blade life.Note: Frames are available in different configurations.

GRANUTECH-SATURN - GRIZZLY 80, ...Grinder Granulator Specifications: -- Rotor size: 77-1/2" -- Cutting diameter: 34-1/2" -- Main motor: 300 HP -- Speed: 321 RPM -- Number of knives: 50 -- Number of stationary knives: 10 -- Rotor type: STAREquipped with: -- Vibratory discharge conveyor -- Outfeed conveyor -- Crossbelt magnet -- Aspiration system -- Replaceable AR500 housing liners -- 3,500 sq/in. screening area -- Severe duty gearboxNOTE: New bed & fly knives on the machine, and new wear liners &new screens. Control panel will be completely rebuilt with a 500 Amp disconnect, a soft start and all the controls.

GRANUTECH-SATURN - 62-40, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 100 HP.Model: 62-40 HTFeed Opening: 55″ x 38″Outside Dimensions: 130″ x 61″ X 43″Power Unit Dimensions: 96″ x 86″ x 96″ Weight is 20,000 Lbs.Cutter Diameter: 20.5″ at HooksPower Unit Open Loop, Skid MountedElectrical Power 200 HP (2 x 100) Hydraulic Flow 156 GPM; Rated Pressure 3000 PSIOperator initiated pushbutton controls,featuring Allen Bradley PLC Motor controls include primary disconnectwith short circuit protection, full load contactors, and electronic overload detectionControl power is derived from a single-phase transformer.All components are assembled and wired in a NEMA enclosure Heavy Duty Discharge Conveyor and mezzanine Stand

GREEN - 60" X 27', ...Steel Belt Type ConveyorSteel Belt Feed Conveyor -- Width: 60" -- Length: 27 Feet -- Lower Horizontal: 10-1/2 Feet -- Drop Off: 10 Feet -- Working: Fine -- Loaded onto your Truck

GREENMAX - EPS-AC-100, ...Cold Press DensifierSpecifications: -- EPS Polystyrene Foam Densifier -- Ratio: 50 to 1 -- Volume: 220 Lbs/Hr -- No Conveyor -- Loaded ont your Truck

GREENMAX C100 SCREW COMPACTOR with Infeed ConveyorSpecifications: •Screw compression technology, Lower utility consumption, and higher efficiency•Able to deal with fish boxes that contain water•CE approved and comply with UL/CSA standards•A speed control device is designed to prevent EPS from melting•Reputable & High-quality components make the machine reliable and durable•SIEMENS control system guarantees easy and simple operation. --Capacity 220lbs/hr

GS - HEAVY-DUTY 34 KVA, ...Transformer.SCR Drive Transformer. -- Cat # DT631H34S. -- High voltage 575 Volts Delta; Low voltage 230 Y/133.

GUIDETTI - WIRE 415, ...Copper & Wire Chopper with Pre-Shredder -- Currently Disassembled.Specifications: -- Feed size of material; 1,310 x 2,140 mm. -- Load pusher stroke: 600 mm. -- Rotor diameter: 220 mm. -- Rotor rotation speed: 82 RPM. -- Hydraulic power: 0.75 kW. -- Grid hole diameter: 40 mm. -- Rotating blades: 23 + 4 External. -- Low hours; 2,300 Hrs.GUIDETTI Pre-Shredder New in 2012. -- Model: PM6N 600/200 -- Low hours: 1,700 -- Loaded onto your truck.

HAAS - 2000XL 2.0, ...Mobile ShredderLow Hours; 2018 YMFG.Specifications & Features: -- Can be used at any location (comfortable transport measurements). -- Easy & quick positioning thanks to crawler track and radio remote control. -- Shreds different materials with just (1) tool configuration. -- High throughput capacity of up to 100 tons/Hr. -- Resistant against foreign bodies. -- Low wear cost and long lifetime. -- Service and maintenance friendly. -- No wrappings; self-cleaning. -- Quiet main drive.

(4) HARMONY - M60-CB, ...Vertical Balers with (1) PTR 3400-HD. ...Vertical BalerLot of (5) Vertical Balers; with free loading onto your truck.Specifications:Cylinder: 6"Power unit: 10 HP

(8) HARMONY - M60-CB, ...Vertical BalersLot of (8) Balers: Loaded on your truck!Specifications: -- Bale size: 60" x 30" x 48" -- Cylinder: 6" x 48" -- Motor: 5 HP -- Hi/Lo Power Unit

HARMONY T60-XDRC Vertical BalerSpecifications: -- Motor: 20 HP -- Large 10" Cylinder with Twin Torque Tubes -- Bale Size: 30" x 60" x 48" -- Feed Opening: 25" x 60" -- Ram Force: 235,620 LbsEquipped with: -- Conveyor Over the Back: 48" -- Loaded on your Truck!

HARRIS PIRANHA Full Closed Door Horizontal BalerSpecifications: -- Cylinder: 10" -- Main motor: 20 HP -- Feed opening: 56" x 36"Equipped with: -- Full Pen

HARRIS HAL-60NF-FE-FP NON-FERROUS Closed Door Horizontal Baler with ConveyorSpecifications: -- Main cylinder: 10" -- Main motor: 75 HP -- Bale size: 45" x 30" x 60" -- Feed opening: 60" x 54" -- Door cylinder: 5" -- Cycle time: 15 sec (no load)Equipped with: -- 48"W Steel Pan Infeed Conveyor

HARRIS HLO-608-AR30 Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Feed opening: 60" x 45" -- Main motor: 30 HP -- Bale size: 48" x 40" x VariableEquipped with: -- Auto-Tie system -- Automatic cycle

HARRIS - HLO-608A30, ...Wide-Mouth Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Main motor: 30 HP -- Tension cylinder: 8" -- Stroke: 10" -- Feed opening: 60" x 45" -- Bail size: 48" x 40" x 72" -- Ram force: 150,796 LbsEquipped with: -- Wide-mouth -- Heavy-Duty construction

HARRIS GRIZZLY 240-T100-11/9 2-Ram Horizontal Baler with Conveyor72" Incline Conveyor on this Baler; only (2) years old!Specifications: -- Cylinder: 9" -- (2) Main motors: 100 HP -- System pressure: 5,000 PSI -- Main ram face pressure: 283 PSI -- Ejector ram face pressure: 202 PSIEquipped with: -- Operator control station with PLC control -- 72" Green Machine steel belt infeed conveyor -- L & P Pinnacle Tier

HARRIS HRB-SR 2-Ram Horizontal BalerBC-011225: -- Main motor: 100 HP -- Cylinder: 12" -- Bale size: 45" x 45" x 56" -- Force: 198 Tons -- Bale ejector bore: 8" -- Bale ejector force: 88 Tons -- Side ram bore: 6" -- Side ram force: 9 Tons