WEIMA WLK 15 Vertical Hopper-fed Low Noise Grinder Specifications: -- Single shaft Shredder/Grinder, 59" x 59" rear-flared hopper opening; 3 cu. yds. cap.; 368 mm (14.5") rotor dia.; 120 HP motor; hydraulic ram with 4-sided serrated ram. -- Equipped with: -- Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters; reduce friction, and dedicate more horsepower to grinding. -- (82) Welded knives, (4) broaching cutters & (4) counter-knives, recessed concave cutters with low clearance over the rotor to extend cutter life, protect the bolts, and reduce machine wear. -- Features: -- Drop out discharge, hydraulically actuated lift up door for easy purge cleaning; extended screen basket; cut-out for conveyor (not included); false wall; 3/8" - 4" screen available. -- Hydraulic serrated ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system, Hydraulic clutch enables motor to start with the hopper full. -- Complete with: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Recommended for plastic, paper or wood applications.

WEIMA WLK 13 Vertical Hopper-fed Low Noise Grinder Specifications: -- Single shaft Shredder/Grinder, 51" x 47" hopper opening (straight sided), 2 cu. yds. cap.; 368 mm (14.5") rotor dia. x 51.2" rotor length; 60 HP motor and hydraulic ram. -- Equipped with: -- Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters; reduce friction, and dedicate more horsepower to grinding. -- (68) welded knife holders, recessed concave cutters with low clearance over the rotor to extend cutter life, protect the bolts, and reduce machine wear; drop out discharge, lift up door for easy purge cleaning when used in plastics application. -- Hydraulic serrated ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system, Hydraulic clutch enables motor to start with the hopper full. -- Features: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Recommended for plastic, paper or wood applications.

WEIMA WLK 4 Vertical Hopper-Fed, Low-Noise GrinderSpecifications: -- 31-1/2" x 39" Hopper opening at the top, 1.1 cu. yds. cap. Features: -- 30 HP rotor motor, Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. Equipped with: -- (14) Replaceable back bolt-on cutter knives, welded knife holders standard, recessed concave cutters with low clearance over the 10" dia. rotor extends cutter life, protects the bolts, and reduces machine wear. -- 6" Dia. dust collection outlet (1,200 CFM required); 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content); -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, the lateral force on the ram is minimized by a unique "U-Joint" mounting system. Includes: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for an additional charge). Options: -- Flared hopper, log Spacer, 2nd row of knives, material discharge auger; programmable logic controls;

WEIMA WL-6S Low-Noise Vertical Hopper-Fed GrinderSpecifications: -- 31-1/2" x 47-1/2" Hopper opening w/flared extension, 1.6 cu. yds. cap.; 14-1/2" rotor dia.; 31-1/2" rotor length (800 mm). -- 60 HP Motor; patented "F-ROTOR" design for cloth and fiber; utilizes a V-groove rotor closely matched to grooves in the counter-knife. Equipped with: -- Recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. Complete with: -- 8" Dia. dust collection outlet (1,900 CFM required); 1/2" interchangeable screen; 900 - 2,200 Lbs/Hr output (depending on screen size, material density, and moisture content). -- 3 HP Hydraulic motor; hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. Features: -- Heavy Duty structural steel frame, welded construction.

WEINIG Powermat 1000 6-Head Feed Trough Moulder(B-R-L-T-T-U); working cap. 9-1/16" x 4-3/4". Head sequence: -- Bottom 15 HP, Right 15 HP, Left 15 HP, Top 15 HP, Top 40 HP and universal 30 HP motor. All motors with electronic brakes. WEINIG Touch-Screen "Power Com" -- PowerCom Plus software system features: Profile drawing storage, profile dimensions, tool changes and production optimization. -- Electronic LED readouts for all tool holder settings, including chip breakers & pressure elements. -- Spindle #1: 1-13/16" w/Cutterhead speed of 8,000 RPM; -- PowerLock tool holders on #2 - #5 with 12,000 RPM and universal tool holder variable from 4,000 to 12,000 RPM and with high precision bearings; adjustment of vertical tools 2-3/16" axially. -- Motorized tool positioning; radial & axial on tool holders #2 - #5; motorized feed beam adjustment with independent adjustment top head; top head with independent adjustment of chip breaker & pressure element. -- Universal spindle with 270° of movement. -- Variable feed speed from 20 - 118 FPM, 7.5 HP inverter controlled Cardan feed drive, overhead feed wheels with pneumatic pressure. -- Vertical tools with adjustable table plates to cutting circles, hardened infeed bed plates before & after 1st bottom head. -- Chromed tables and fences, (2) powered table rollers in bed and (1) between left and top spindles and (1) at outfeed. -- Infeed straightening table 2 M (6-1/2').Equipped with: Pedestal for machine controls separate from the electrical cabinet, central location of lubrication points. -- Electromagnetic interlocking of safety hood, automatic table lubrication pump and (2) lights inside reinforced sound enclosure; phone modem..

WENIG PROFIMAT 23E Feed Through Moulder5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindle Sequence: Bottom 10 HP, Right & Left by 15 HP, Top 15 HP and Bottom 10 HP motor. -- Spindles: 1-1/2" diameter. with cutterhead speed of 6000 RPM. -- Digital Readouts: "DigiSet" digital readouts for chipbreaker and pressure element at top spindle -- FPM: Variable feed speed from 17 - 78 FPM, powered by a 4 HP motor -- Safety: Full enclosure sound proof booth -- Receding chipbreaker & pressure element at top spindle -- Rollers: Side pressure opposite right spindle, spring loaded with 2 rollers and driven outfeed roller in bed. -- Infeed straightening table 2 meter (6'6") -- Features central lubrication system via manual table lubrication pump. -- Machine is wired for 460 Voltage / 3 Phase Power using 79 Full Load Amps. -- Includes - All heads, rollers, setup tools shown are included, Owner's Manual, and 4-hose Dust manifold.This machine runs perfectly, is in Good Condition- with some dents to the outer sound enclosure. Overall Dimensions: 132” x 64” x 64”Approx. 8,000LBSRemoval is responsibility of buyer. Seller can build a crate, and put it on a truck for an additional $1,000.00

WEINIG UNIMAT 818 S Feed Through Moulder 6-Head (B-R-L-T-T-B), working dimension 12-3/16" x 6- 5/16".Capacity: -- Working width 3/4" - 12-3/16" -- Working thickness 5/16" - 6-5/16" -- feed speed-variable with 10 HP inverter 20 - 200 FPM Head sequence: -- Bottom 25 HP, right 15 HP, left 15 HP, top 30 HP, top 30 HP, and bottom 30 HP motor; all motors with electronic spindle brakes. -- Spindle dia. 1-13/16" with cutter head speed of 6,000 RPM; -- outboard bearings on spindles #1, #4, #5 & #6. Electronic LED digital readouts for all spindlesJointer: -- Head # 1 Bottom straight jointer manual, remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12 -1/16"; With outboard bearing 4 3/4"; For tool circle 6 1/16"- 7-1/16" -- Head # 2 Right spindle Profile jointer automatic; For working height 4-3/4"; Remotely controllable with closed safety hood; Automatic stone adjustment -- Head # 3 Left spindle Profile jointer automatic; For working height 4-3/4"; Remotely controllable with closed safety hood; Automatic stone adjustment -- Head # 4 Top spindle straight jointer manual; remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12 1/16"; With outboard bearing 4-3/4"; For tool circle 6-1/16"- 7-1/16"Profile Jointer automatic; Remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 9-1/16" without outboard bearing 4-3/4" -- Head # 5 Bottom spindle straight jointer manual; remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12-1/16"; With outboard bearing 4-3/4"; For tool circle 6 1/16"- 7-1/16"Profile Jointer automatic; Remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 9-1/16" without outboard bearing 4-3/4" -- (4) Jointer cassettes for profile jointer, length 6" -- (2) Jointer cassettes for profile jointer, length 9" -- (1) Set of jointing stoneReadouts: -- Digiset (double mechanical readouts) for left and top radial adjustments. One readout is for the tool size and the other for the finished wood dimension (with Imperial inch adjustment -- Mechanical readouts on all other axes. Side pressure roller: -- (10) Driven feed roller shaft from above -- (5) Driven steel rollers in the machine table -- Axial setting range of the feed rollers opposite left spindle, 1-3/8" -- Extension of the feed shaft opposite the left spindle to 8 -1/4 in. -- Axial setting range of vertical spindle 3-1/8 in. Axial setting range of horizontal spindle 1 -3/4 in. (1st bottom 3/8 in.) -- All spindles diameter 1 -13/16" -- (6) Additional set of spacing collars, clamping length 6-11/16", diameter 1-13/16" -- Pressure shoe in front of 1st left spindle receding from tool, incl. lateral roller pressure, pneumatic -- Receding chip breaker in front of 1st top spindle, pneumatic. -- Pressure shoe in front of and guide after top spindle with mechanical digital displays

WEINIG PROFIMAT 23 Feed Through Moulder;(6)-Heads (B-R-L-T-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindles 1-1/2" dia. with cutterhead speed of 6,000 RPM. -- Feed System & Features: variable feed speed from 20 - 78 FPM, powered by a 5.5 HP motor. -- Receding chip breaker at top spindles. Side pressure opposite right spindle; spring-loaded with (2) rollers; driven outfeed roller in bed. -- In-feed straightening table 2 M (78"), side pressure roller mounted to in-feed table. Note: Bare Machine: No dust manifold or tooling.

WEING U 23 E "STANDARD" Feed Through Moulder; (6) Heads, (B-R-L-T-B-U), working capacity 9-1/16" x 6" profiling. -- Head Sequence: Bottom 10 HP, right & left by 15 HP, top 15 HP, bottom 15 HP and universal 15 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM; mechanical digital readouts on spindle adjustments for both axis, radial adjustment only on 1st bottom head. -- Motorized feed beam adjustment with independent adjustment of top heads, receding chip breakers on left and top heads. -- Tool cutting circles of 8-7/8", table plates adjustable to the cutting circle on vertical spindles with axial adjustment of 3-1/8" for multiple profiles. -- Feed motor 5 HP, variable speed from 18 - 118 FPM, overhead feed wheels with pneumatic pressure; (2) powered rollers in machine table. -- Infeed straightening table is 2 M (6-1/2') with adjustable fence & adjustable outfeed table; side pressure roller mounted to infeed table. -- Central lubrication, full sound/safety enclosure and manual bed lubrication pump. ALSO AVAILABLE: -- Weinig model 960 Grinder, sells new for approx. $35,000... Add $12,500 if purchased with the Moulder, -- CNC Template Maker, with scanner and DXF file capabilities, sells new for approx. $12,000... Add $3,500 if purchased with the Moulder.

WEINIG R 960 Profile Grinder 12"12" Max. arbor length, tool dia. 9" max. to 4" min. -- Grinding wheel speed inverter controlled 1,500 to 3,000 RPM by 1.5 HP motor. -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings, setting gauges for axial constant, axial (side) clearance angle 0ø - 20ø. -- Onboard diamond wheel dressing, 8-7/8" max. 6" min. grinding wheel dia.; 13-gal. coolant tank with 1.2 HP pump. Includes -- arbor dia. 1- 13/16".Note: New bearings on carriage

WEINIG RONDAMAT R960 Profile Grinder. Working Dimensions: -- 9-29/64" Maximum tool width; 3-15/16" Minimum to 11-13/16" Maximum cutting circle. -- Grinding Wheel: Diameter 5-29/32" min. to 8-7/8" max. grinding wheel bore - 60 mm. Onboard diamond wheel dressing tool. -- Drive: Variable Frequency Controlled Drive giving a spindle speed - 1,500 to 3000 RPM; 1.5 HP Motor. -- Template carrier: Utilizes a template stylus-copy system, whereby the tool head table copying-grinding is effortless (precision linear floating table movement feels smooth as if there is zero gravity).Resistance template cross support with setting gauges for axial constant system; axial (side) clearance angle 0° - 20°. Holder for fixed and revolving tracing pins; for easy follow of the template to grinding aggregate. -- Coolant: 13-Gallon coolant tank capacity with 1.2 HP coolant pump. Includes: -- 1-13/16" arbor

WEINIG RONDAMAT R960 Profile Grinder Working Dimensions: -- 9-29/64" maximum tool width; 3-15/16" Minimum to 11-13/16" Maximum cutting circle. -- Grinding Wheel: Diameter 5-29/32" min to 8-7/8" max. grinding wheel bore - 60 mm. Onboard diamond wheel dressing tool. -- Drive: Variable Frequency Controlled Drive giving a spindle speed - 1,500 to 3000 RPM; 1.5 HP Motor. -- Template carrier: Utilizes a template stylus-copy system, whereby the tool head table copying-grinding is effortless (precision linear floating table movement feels smooth as if there is zero gravity). Resistance template cross support with setting gauges for axial constant system; axial (side) clearance angle 0° - 20°. Holder for fixed and revolving tracing pins; for easy follow of the template to grinding aggregate. -- Coolant: 13 Gallon coolant tank capacity with 1.2 HP coolant pump. -- Includes: Manuals and 1-13/16" arbor.

WEINIG - Rondamat 934, ...Profile Knife GrinderSpecifications: -- 9-3/8" Max. arbor length, 4" - 9" tool dia. -- 6" - 8-7/8" Grinding wheel dia., grinding wheel speed inverter controlled with grinding wheel speeds 1,500 to 3,000 RPM; 1.1 kW (1.5 HP) Motor.Equipped with & Features: -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings; setting gauges for axial constant; axial (side) clearance angle 0° - 20°. -- Onboard diamond wheel dressing, 13-Gallon Coolant tank with 1.2 HP Pump.Dimensions: 50" x 43" x 62" HWeight: 1,600 Lbs

WEINIG RONDAMAT R960 Profile Grinder. Working Dimensions: -- 9-29/64" maximum tool width; 3-15/16" Minimum to 11-13/16" Maximum cutting circle. -- Grinding Wheel: Diameter 5-29/32" min to 8-7/8" max. grinding wheel bore - 60 mm. Onboard diamond wheel dressing tool. -- Drive: Variable Frequency Controlled Drive giving a spindle speed - 1,500 to 3000 RPM; 1.5 HP Motor. -- Template carrier: Utilizes a template stylus-copy system, whereby the tool head table copying-grinding is effortless (precision linear floating table movement feels smooth as if there is zero gravity). Resistance template cross support with setting gauges for axial constant system; axial (side) clearance angle 0° - 20°. Holder for fixed and revolving tracing pins; for easy follow of the template to grinding aggregate. -- Coolant: 13 Gallon coolant tank capacity with 1.2 HP coolant pump. -- Includes: Manuals and 1-13/16" arbor.

WEINIG RONDAMAT R 950 Profile Grinder Working dimensions 9-1/2" Max. arbor length, tool cutting circle 4" min., 9" maximum.Specifications: -- Tool carriage movement with linear table bearings, setting gauges for axial-constant. -- Radial (back) clearance angle 15° - 35°, axial (side) clearance angle 0° - 10°. -- Drive motor 1.5 HP, Grinding wheel diameter: 5-7/8" to 8-7/8", -- Grinding spindle; speeds via ribbed belt adjustment: 1,500, 1,700, 2,400 and 3,000 RPM, manual clamping of grinding wheel to spindle. -- Coolant tank capacity: 10 gallons. -- Includes: 1-1/2" arbor, (1) grinding wheel flange wrench set for wheel change-out, and dressing attachment for wheel. -- Includes: 1-1/2" arbor, (1) grinding wheel flange, gracing pins, wrench set for wheel change-out and dressing attachment for wheel. -- Dimensions: 60" L x 48" W x 48" H NOTE: The machine is currently in storage and prepped for transport, Seller can load.

WEINIG R 930 Profile GrinderWith 8-55/64" Arbor capacity, 11-27/64" dia. max tool dia.Specifications: -- 13/64" Grinding wheel width, 2-23/64 grinding wheel bore, 1-1/2 HP dressing wheel motor. -- (4) Step Vee-pulley with spindle speeds of 1,720 - 2,000 - 2,500 & 2,820 RPM -- 20-gallon reservoir incl. pump and necessary piping for coolant. -- Radial clearance angle on the back is 10 - 30°, axial clearance angle to both sides is 0-20°.

WEINIG - Rondamat 934, ...Profile Knife GrinderSpecifications: -- 9-3/8" Max. arbor length, 4" - 9" tool dia. -- 6" - 8-7/8" Grinding wheel dia., grinding wheel speed inverter controlled with grinding wheel speeds 1,500 to 3,000 RPM; 1.1 kW (1.5 HP) Motor.Equipped with: -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings; setting gauges for axial constant; axial (side) clearance angle 0° - 20°. -- Onboard diamond wheel dressing, 13-Gallon Coolant tank with 1.2 HP Pump.Dimensions: 50" x 43" x 62" HWeight: 1,600 Lbs

WEINIG RONDAMAT R960 Profile Grinder. Working Dimensions: -- 9-29/64" Maximum tool width; 3-15/16" Minimum to 11-13/16" Maximum cutting circle. -- Grinding Wheel: Diameter 5-29/32" min. to 8-7/8" max. grinding wheel bore - 60 mm. Onboard diamond wheel dressing tool. -- Drive: Variable Frequency Controlled Drive giving a spindle speed - 1,500 to 3000 RPM; 1.5 HP Motor. -- Template carrier: Utilizes a template stylus-copy system, whereby the tool head table copying-grinding is effortless (precision linear floating table movement feels smooth as if there is zero gravity).Resistance template cross support with setting gauges for axial constant system; axial (side) clearance angle 0° - 20°. Holder for fixed and revolving tracing pins; for easy follow of the template to grinding aggregate. -- Coolant: 13-Gallon coolant tank capacity with 1.2 HP coolant pump. -- Includes: Manuals and 1-13/16" arbor and also has a 2-1/8 arbor

WEINIG 051 Single End Tenoner W Motorized Feed TableSpecifications: -- 2-Head Tenoner for cabinet and window parts. -- (1) Trim saw & (1) Stacked cope head, both direct motor drive, sliding table with fence line and (2) pneumatic hold downs, control panel and large asssortment of high quality tooling.Actual model is WEINIG 051

WENIG PROFIMAT 23E Feed Through Moulder5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindle Sequence: Bottom 10 HP, Right & Left by 15 HP, Top 15 HP and Bottom 10 HP motor. -- Spindles: 1-1/2" diameter. with cutterhead speed of 6000 RPM. -- Digital Readouts: "DigiSet" digital readouts for chipbreaker and pressure element at top spindle -- FPM: Variable feed speed from 20 - 78 FPM, powered by a 5 HP motor -- Safety: Full enclosure sound proof booth -- Receding chipbreaker & pressure element at top spindle -- Rollers: Side pressure opposite right spindle, spring loaded with 2 rollers and driven outfeed roller in bed. -- Infeed straightening table 2 meter (6'6") -- Features central lubrication system via manual table lubrication pump. -- Machine is wired for 230 Voltage / 3 Phase Power using 146 Full Load Amps. -- Includes - All heads, rollers, and setup tools shown in photos are included.Overall Dimensions: 132”L x 78”W x 68”HApprox. 8,000LBS