EZ CAR CRUSHER MODEL A+ --Opening 20 ft long x 7'6" width x 8 ft height --System Pressure 2500 psi --Port Reliefs Set At 2650 psi --Cylinders 10" bore --Travel 78" --Shaft 4" rod --Remote --Approx 5,500 Hours

MODEL A EZ CAR CRUSHERHydraulicsSystem Pressure 2500 psiPort Reliefs Set At 2650 psiCylinders 10" boreTravel 78"Shaft 4" rodOpeningSize 20" x 8'1" x 7'7"OverallWeight 61,000 lbsLength 43'3"Travel & Operating Height 13'3"

EZ CAR CRUSHER MODEL B With Remote --HydraulicsSystem Pressure 2500 psiPort Reliefs Set At 2650 psi --Cylinders 8" bore --Travel 72" --Shaft 2.5" rod --OpeningSize 20" x 7'6" x 7'7" --OverallWeight 49,000 lbsLength 43'5"Travel & Operating Height 13'3"

FANUC - S430iW, ...RobotFANUC Robot for palletizing rectangular compressed bags.Specifications -- (6) Axes. -- Payload: 165 kG (255 Lbs). -- H-Reach: 2,643 mm (104"). -- Robot mass: 1,300 kG (2,860 Lbs). -- Complete with: Pendant control. -- Complete with: Gripper type arm and pallet gripper. -- Refurbished with (90) days Warranty. -- Buyer to install safety guards.NOTE: Machine was rebuilt is 2021.

FANUC - M-410I, ...Palletizing RobotFANUC M-410iC/110 Robot is a Palletizing Robot. It runs on the FANUC "R30iB" and "R30iB Plus" controller platform. With lighter payload, this Robot is designed to run faster than its bigger variants.This Robot was ordered and never installed, so it is "new" old stock.Max. payload: 110 kG (242 Lbs). -- Reach: 2,403 mm (94"). -- Axes: 4. -- Repeatability: +/- 0.5 mm. -- Robot Mass: 1,030 kG (2,270 Lbs). -- Floor mounted.

FANUC 165 Complete Palletizing SystemEquipped with and includes: -- FANUC 165 Complete with R-2000iA Controller with 600mm stand -- Pick-Up Arm Gripper Arm for pillow bag type -- 5 Feet x 24" Motorized In-feed Belt Conveyor -- (1) 10' Motorized Pallet Conveyor -- Automatic Pallet Dispenser -- Price includes Loading on your Truck

FANUC M410/160 iB ROBOT PALLETIZING SYSTEM Specifications: -- Complete with R-30iA Controller All Refurbished -- Pillow Bag Tooling -- 4-Axis control -- Mounted to a heavy-duty base -- 10 Feet Long Rubber Belt Conveyor -- (2) 5 Feet Motorized Pallet Conveyor -- (3) 10 Feet Motorized Pallet Conveyor -- Automatic Pallet Dispenser -- up to (14) 50 Lbs bags per minute -- Machine weight 4500 LbsAUTOMATIC PALLET STRETCH WRAPPING SYSTEMWULFTEC or LANTECH Stretch Wrapping System or Equivalent Not INCLUDED

COMPLETE FANUC 125I ROBOTIC PALLETIZING SYSTEM --System Includes the following: --FANUC M-410IB/160 Palletizing Robot with Controller and Stand --Robot will be tested --End of Arm Tooling to Pick, Fork Style, Picking 94 Lbs Concrete Bags --Master System Control Panel, 480 VAC 3PH & 24VDC Controls with HMI --Allen-Bradley Light Curtain with Safety Controller --Infeed Chain Drive Roller Conveyor 10 Feet --Pallet Hopper --Safety Fencing COST --20 Feet Exit CDLR Pallet Conveyor 52" Wide --System Integration / Programming

END ARM TOOLING FOR FANUC ROBOT -- Gripper Finger Type End Arm Tooling -- Design for Fanuc Robot Model S-430iW -- Loaded on your truck

FLEXICON HOPPER/FEEDERSpecifications: -- Flexible Screw Approximately 12 Feet -- 7" Diameter -- Flights 6-1/2" -- Tube Diameter 7-1/2" -- Discharge Height 86 Inches -- Discharge Diameter 10 Inches -- 10 HP Motor -- Dimensions; 72" Long x 48" Height x 7-1/2" Depth -- Loaded on your Truck

FOLEY-UNITED 7460 910 Profile Knife GrinderSpecifications: -- Capacity: 12" Max. cutting circle x 12" W. -- Table size 7"; x 12"; x 34-1/2"; H. -- Table travel 12". -- Side clearance 5°, 10°, & 15°. -- Back relief angle 10° - 30°. -- Wheel O.D. 7" - 10", Wheel widths: 1/16", 1/8", & 3/16", Wheel arbor dia. 1-1/4".Equipped with: -- 2 HP - 2,850 RPM TEFC Wheelhead motor.Complete with: -- 40 mm (1.57") Dia. x 9-3/4" L Tool Arbor. -- Micro Precision Wheel Dressing System (MPDS), Swing-away.Dimensions of this specific machine 55" x 41" x 54" H.NOTE: No coolant pump.

FORESTECH ENTERPRISES - D-GR-1S: DryerDrum Dryer designed for a large Pellet plant; never put into production.Diameter (approx.): 12-3/4 Ft.Drum Length (approx.): 48 Ft.Dryer comes with Forge Tire but does not come with trunnion drives, which we can have manufactured.

GENERAL ELECTRIC - 9T, ...3-Phase TransformerSpecifications: -- 208 Volt secondary to 480 Volt primary; 45 KVA @ 150° C rise; 120 V neutral line; 60 Hz - 3 Ph; Type 2 enclosure. -- Includes: -- Fused disconnect.

GENERAL KINEMATICS Para-Mount II Single Deck Rectangular Vibratory Screener;Complete with the following features: --Model STM 96 X 20. --Carbon Steel. --Nominal screen size 96" wide x 20 long x 15" deep. --Designed for Trona mineral at a feed rate of 700 tons per hour at 80 pounds per cubic foot bulk density. --Driven by (2) 15 HP top mounted drives. --Current screen: Approximate 1" x 1" square openings. --Base mounted. --Overall dimensions: 290"L X 130"W X 90"H

GENOX V800 New Single Shaft ShredderIn Stock - Ready to Ship!Features: -- Shock Absorbing Gearbox that reduces stress on Drive Components -- 50 HP motor -- Hopper Opening - 59" x 56" -- Rotor Diameter - 15.75" -- Rotor Knives that can be used on four edges before replacement. -- Durable Counter Knives that adjust to maintain cutter clearance -- Quick Change Screens for accurate particle size control -- Segmented Shredding Chamber Floor with Brass Guides -- Twin Speed Hydraulics with an integrated air cooler -- Stand Alone Electrical Control Panel with Siemens PLC Control System -- Tested, Approved and Certified to the applicable CE safety standardsTypical Applications --Plastics --Wood --Cable --Paper --Aluminum --Foam --Textile

GENOX V600 New Single Shaft ShredderIn Stock - Ready to Ship!Features --Shock Absorbing Gearbox that reduces stress on Drive Components -- 25HP -- Hopper Opening - 48" x 43" -- Rotor Diameter - 9" --Rotor Knives that can be used on four edges before replacement. --Durable Counter Knives that adjust to maintain cutter clearance --Quick Change Screens for accurate particle size control --Segmented Shredding Chamber Floor with Brass Guides --Twin Speed Hydraulics with an integrated air cooler --Stand Alone Electrical Control Panel with Siemens PLC Control System --Tested, Approved and Certified to the applicable CE safety standardsTypical Applications --Plastics --Wood --Cable --Paper --Aluminum --Foam --Textile

DTX 340 - 14" BLADES" Alligator Shear Description -- DTX 340 --Blade Length: 14"; (340 mm) blades --4-sided reversible & regrindable --Lower blade in adjustable knife seat --Adjustable mechanical guard & adjustable jaw opening --Supplied with guard over cutting head --Foot pedal control

DTX 680 - 24" BLADES" Alligator Shear --Description -- DTX 680 --Blade Length: 680mm --Cutting Force: 80 tons --Motor: 3 phase 220 V

GLOBAL BAGGER SYSTEMSpecifications: -- Support Structure 2" Tubular Steel -- Height 86 Inches -- Length 12 Feet -- Width top 60" and 90" Base -- Total Weight 1900 Lbs approx. -- Hopper Width 60" -- Hopper Length 106" -- Hopper Depth 44 " -- Capacity 3 Cu.Yards -- Hopper Conveyor Length 146 " -- Hopper Conveyor Width 25" -- Rubber Conveyor Belt 18" Wide -- Bag Clamp Air Operated -- Heat Sealer 24" capacity -- Bagging Capacity up to (200) Bags per HourOptions available, but not included; -- Weight Measure Scale -- Air Compressor -- Bag Stitching Machine -- One Year Warranty -- Loaded on your Truck

GRANUTECH-SATURN - GRIZZLY 80, ...Grinder Granulator Specifications: -- Rotor size: 77-1/2" -- Cutting diameter: 34-1/2" -- Main motor: 300 HP -- Speed: 321 RPM -- Number of knives: 50 -- Number of stationary knives: 10 -- Rotor type: STAREquipped with: -- Vibratory discharge conveyor -- Outfeed conveyor -- Crossbelt magnet -- Aspiration system -- Replaceable AR500 housing liners -- 3,500 sq/in. screening area -- Severe duty gearboxNOTE: New bed & fly knives on the machine, and new wear liners &new screens. Control panel will be completely rebuilt with a 500 Amp disconnect, a soft start and all the controls.