MAGGI SYSTEM 46 Double Head Line Boring Machine:Heavy Double Head Line Borer with (2) 23-spindle heads; 32 mm spindle spacing.Specifications: -- Drilling from the bottom up and with 5-1/8" - 25-19/32" distance between rows. -- Drilling vertically from the bottom allows the chips to drop down falling out of the holes. -- Drilling depth of up to 2-1/16" (55 mm) max., takes only seconds to set. -- (2) 2 HP - 3,500 RPM Commercial Duty motors; spindles with steel gears & high quality bearings. -- Easy repetition by (2) air index pins for continuous line drilling, left and right roller track supports extend up to 400 mm (15-3/4") for larger panels.Features and Includes: -- 120" Back fence with (4) repeat "flip" stops; includes 27-3/4" (704 mm) fence for quick positioning of flip stops. -- (6) Pneumatic holddowns to automatically actuate when the drill cycle begins. -- (46) "Quick Change" chucks for easy tool change. -- Magnetic motor controls and 1/4" air regulator with filter and oiler; 100 PSI required air pressure.

MAGGI SYSTEM 21 PRESTIGE Construction & Line BorerAdjustable 21-spindle boring head on 32 mm centers with position indicator.Specifications: -- Stops in 0° and 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with magnifying glass viewer. -- 2 HP - 2,800 RPM Motor. -- 34" x 15" Table with mechanical digital side fences for mirror-image. -- 120" Line Boring fence with (2) repeat stops. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks.OPTIONAL: -- 230V Single Phase add $600.00 --29900100 Stop Reference Pin for Line Boring $195.00 -- 26000069 Set of Reference Fences for 45 and 90 degrees $195.00 -- 36000061 Additional Quick Change Bit Adaptor $27.50 ea -- 29971019 Additional Holddown Cylinder Assembly $395.00 ea -- Hinge Boring Head (Specify Blum, Grass, Salice, or Hettich) $695.00 -- TDBSE5705LH or RH 5mm x 57mm LH OR RH Brad Point $9.85 ea -- TDBSE5708LH or RH 8mm x 57mm LH OR RH Brad Point $11.95 ea -- TDBSEHB5735LH or RH 35mm x 57mm LH OR RH Hinge Point $26.80 ea -- FREIGHT TO ANYWHERE IN THE CONTINENTAL USA $ 300.00

MAGGI SYSTEM 35 CONSTRUCTION/LINE BORINGAdjustable 35-spindle boring head on 32 mm centers with position indicator. -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 45" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Other Accessories also Available!

MAGGI - SYSTEM 21 PRESTIGE, ...Construction/Line Borer Adjustable 21-spindle boring head on 32 mm centers with position indicator.Specifications: -- Stops in 0° and 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with: Auto setting & safety feature. -- Head height fine adjustment with: Mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 34" x 15" Table with: Mechanical digital side fences for mirror image. -- 120" Line Boring fence with: (2) Repeat stops. -- Foot actuated pneumatic clamps & drill cycle. -- Equipped with: Magnetic starter, overload protection, and (1) set of "quick-change" chucks.

MAGGI - SYSTEM 23, ...Construction Line BorerConstruction Boring Machine that drills vertically from bottom and horizontally from rear.Specifications: -- 23-Spindle head on 32 mm centers. -- Table size: 38" x 16". -- Max. working width: 25". -- Drilling stroke: 2-1/2". -- Main motor: 2 HP. -- Adjustable drilling depth with patented spiral setting device: ?0 to 2-1/2". -- Tilts pneumatically from lower to rear position with locking points between 0° - 90° for drilling any angle. Equipped with: -- 120" Back fence with: (4) Stops. -- Foot pedal control. -- Magnetic Starter with overload protection. -- (23) Quick-change chucks. -- (2) Patented quick-release pneumatic holddown clamps with independent manual movement. -- Dust outlet: 3".

MAKITA LS1013 10" Double Bevel Sliding Compound Miter Saw, with Stand Specifications: Miter angles 52° Right & 47° Left, with (9) Positive stops at 15°, 22.5°, 31.6°, & 45° Left or Right & 0°. Bevel angles 45° Right & 45° Left. Dimensional lumber cut capacity: 2" x 12" at 90° & 2" x 18" at 45° Left. Arbor dia. 5/8" Equipped with: 1,430 W - 13 A - 3,700 RPM Motor, with Electric brake. Complete with: DELTA "55-155" Universal Miter Saw Stand. Machine with Stand Dimensions: 104" x 28" x 59" H. Machine Dimensions: 30" x 28" x 25" H. Machine Weight: 50 Lbs. Stand Dimensions: 104" x 22" x 35" H. Stand Weight: 85 Lbs.

MAKOR LTS/6E Profile Sander(6) Stations, 6"Width Capacity (approx), PLC Controller. -- 5.5HP Variable Speed Feed Motor with (6) 6"W Powered Feed Belts. -- 1st Station: Tiltable 3-Point Oscillating Profile Sander, 24" Contact Sanding Area, 2HP MAKOR Motor with Cooling Fan and J1000 Drive. -- 2nd Station: Tiltable 3-Point Oscillating Profile Sander, 24" Contact Sanding Area, 2HP MAKOR Motor with Fan and J1000 Drive. -- 3rd Station: Tiltable Polishing Head 2HP MAKOR Motor with Fan and J1000 Drive. -- 4th Station: Tiltable Polishing Head with with 2HP MAKOR Motor with Fan and J1000 Drive. -- 5th Station: Tiltable Polishing Head with 2HP MAKOR Motor with Fan and J1000 Drive. -- 6th Station: Tiltable Polishing Head with 2HP MAKOR Motor with Fan and J1000 Drive.

MAKOR LTSI/6 Profile Sander(6) Stations, 6"Width Capacity (approx), PLC Controller. -- 5.5HP Variable Speed Feed Motor with (6) 6"W Powered Feed Belts. -- 1st Station: Tiltable 3-Point Oscillating Profile Sander, 24" Contact Sanding Area, 2HP MAKOR Motor with Cooling Fan and J1000 Drive. -- 2nd Station: Tiltable 3-Point Oscillating Profile Sander, 24" Contact Sanding Area, 2HP MAKOR Motor with Fan and J1000 Drive. -- 3rd Station: Tiltable Polishing Head 2HP MAKOR Motor with Fan and J1000 Drive. -- 4th Station: Tiltable Polishing Head with with 2HP MAKOR Motor with Fan and J1000 Drive. -- 5th Station: Tiltable Polishing Head with 2HP MAKOR Motor with Fan and J1000 Drive. -- 6th Station: Tiltable Polishing Head with 2HP MAKOR Motor with Fan and J1000 Drive.Dimensions are 20’ L x 5’ W, 8’ H, and weighs approximately 7,000 lbs.

MAKOR Q-ONE 1300 FEED THRU FLAT LINE SPRAY SYSTEM: -- Features:The Q-ONE sprayer is a single-arm Reciprocating System with paper belt overspray collection; it combines productivity, flexibility, and quick change-over with a limited investment. This continuous belt conveyor system, combined with disposable paper promotes a "self-cleaning" machine & dramatically reduces clean-up & service time.Operation: -- Suitable for all types of conventional coatings from solvent to water-based materials; -- Conveyor advances only when parts are present. -- Conveyor system with a vacuum belt to secure & support the feeding of the disposable paper, ensuring proper tracking & automatic winding of the paper roll. -- The paper roll change-over time is only a few minutes. The panel lies flat on the belt which prevents the transfer of over-spray onto the bottom side. -- The spraying enclosure is pressurized via (2) intake fans and filtered by means of dry filters. -- This system allows clean air & maintains consistent airflow throughout the Spray Cabin, also limiting the machine maintenance time to a minimum and produces an enhanced quality finish, control & containment of over-spray, resulting in significant material economy. Internal airflow is adjustable by means of inverters. -- The spray system uses an inverter drive, variable speed reciprocating trolley which provides a consistent spray speed & pattern across the entire conveyor belt.Equipped With: -- Spray system for (4) spray guns (guns NOT included), mounted on a "Quick-Change" gun support trolley. -- (2) Gun holding plates with "QC" (quick-change) system to allow for fast gun replacement -- (3) High-pressure Coating Circuits with recycling through a fluid distribution manifold + (1) High Pressure Circut (without return) for Solvent. -- Recycling Coating Circuts have return hoses for quick washing the Circut & recirculating of the Coatings. -- PLC touch-screen for clear visual operator interface & large memory storage of working programs, parameters, controls & diagnostic functions. Photodiode light bar reads the location and size of the part to be sprayed. Technical Specifications: -- Working Length: infinite -- Working Width: 25 - 1,300 mm (1" - 51") -- Working Height: 3 - 60 mm (0.125" - 2.375") -- Feed Motor: 0.75 kW, variable speed control from 1 - 6 MPM (3.3 - 19.6 FPM) -- Vacuum Belt Motor: 1.5 kW (2 HP) -- Paper Rewind Motor: 0.18 kW 0.24 HP). -- Paper Roll: Dia. 550 mm (21.6") max. -- Reciprocator Motor: 2.2 kW -- Exhaust Fan Motor: 5.5 kW -- Air Flow: 7,950 CFM -- Pressurization Air: 2 x 3,900 CFM -- Total Installed Power: 13 kWNOTE: Pumps & Spray Guns are NOT included with this system.

22"; Planer with Byrd Shelix Cutterhead - 4455B, 7.5 HP shingle phase or 10 HP, 3-phBYRD Shelix carbide inserts are indexed for quick changing.Specifications: -- Max depth of cut 3/16", min. part length 10"; max. work pc dims 22" w x 9" thickness. -- (2) Adjustable Bed Rollers, plus one infeed and one outfeed roller. -- Cutterhead speed 5,000 RPM and head is equipped with (110) Byrd knife inserts. -- 2-Speed gearbox provides the perfect feed rate of 20 and 30 FPM.Features: -- Massive cast iron construction throughout. -- Polished built-in table roller assists movement of rough stock. -- Segmented infeed roller and sectional chip breaker easily handles rough stock. -- Magnetic controls with emergency off switch for safer operation. -- Digital readout allows precise thickness settings. -- Hinged access to cutter head and feed rollers for quick set-up. -- 3 V-belt drive smoothly transfers power to drive train and cutter head. -- Easy access to the motor, drive train, and gearbox assists in maintenance and adjustment. -- 5"; Dust chute easily handles chip removal (requires approx. 900 CFM) -- Powerful EFC motor available in single or three-phase. -- Single phase motor 7.5 HP, 220V Only (38 Amp)

OLIVER 2019 Wood Turning Lathe;This lathe brings the lathe back to the OLIVER line, in true OLIVER Fashion! -- Starting with a solid, stable cast iron base, legs, bed, tool rest, and headstock. -- OLIVER adds a powerful reversible 2 HP motor with a wide speed range for a variety of tasks. -- A frequency inverter and RPM Digital Readout give you an accurate read on your speed so you can precisely adjust for any particular job.Specifications: -- 41" Between Centers, 18" Swing over bed, 40" Swing Outboard; -- Spindle Speed 200 - 2,400 RPM, Front Faceplates 6". (2).Features: -- One of the best features on the lathe is the In-board and Out-board headstocks (slides on the bed), enabling you to work on very large Bowls and most anything else you need to turn. The slide extension can increase the center distance to 57" with optional extension bed.Includes: -- Integral spindle index for (36) positions.Dimesniosn/Weight: 46.5"long x 19.5" depth x 49.25" height. Approx. 415Lbs.Available Options: -- Bed extension that mounts in two positions....Protective Safety Guard. Assembly.... Please call. -- See attached literature for more specifications.

OLIVER 5390 Dual Head Wide Belt Sander1/8" to 6" Thickness capacity 36" Width capacity.Equipped with: -- 20 HP main drive motor, 2 HP variable conveyor feed 15 to 49 FPM.Head configuration: -- 1st Head: Contact drum -- 2nd Head: Roller and PlatenFeatures: -- Digital thickness controller w/ thousandth's jog feature. -- Omron electronic eye sanding belt tracking. -- Variable speed drive 15 to 49 FPM -- Power raising and lowering of the conveyor with digital thickness set-upSpecification: -- Max. width cap 36" -- Feed motor 2 HP -- Elevation motor 0.5 HP -- Max. thickness 6" -- Min. thickness 1/8" -- Contact drum 1st head 8" dia. -- Roller drum on 2nd head 4.75" dia. with 2" wide finishing Platen -- CFM requirements 3600 -- Feed speeds 15 - 49 FPM -- Belt size 37" x 60".

OLIVER 17"; SWING FLOOR DRILL PRESS17" Floor model Drill Press with a durable cast iron head, table and base.Equipped with: -- 3/4 HP motor, 240 to 3,400 RPM motor drives (16) different speeds making it suitable for heavy industrial use. -- The spindle is equipped with a heavy duty 5/8" capacity drill chuck on a MT-2 Morse taper. -- Spindle travel 3-1/8" -- Large 12" x 12" table with clamping slots. -- Rack and pinion system makes it easy to adjust the table up and down.

OLIVER 299 Single Surface Planer;24" Width x 8" thickness cap., Cabinet Planer; -- 7.5 HP Cutterhead motor, and the OLIVER "ITCH" carbide cutterhead. -- 2 HP Gear box variable speed feed works with speeds of 15 - 60 FPM; sectional feed rolls, sectional chipbreakers. -- Complete with: Knife grinding equipment for OLIVER carbide cutterhead, knife setting device, top dust hood, quick set adjustment on bed rollers.One of the "Original" OLIVER Planers!

OLIVER - 4470 24" PLANER W/Oliver HCX Helical Cutterhead Full 24" of cutting width, over 9" of cutting capacity, and the ability to take up to 1/4" off in a single pass through the OLIVER HCX Helical carbide insert cutterhead, this planer will take whatever you can dish out. -- The Digital Thickness Controller and Powered Table Travel eliminate guesswork, make dialing in settings a breeze. But ease of operation isn't everything, this OLIVER outputs stock that's true and straight. -- A Sectional Infeed Roller and Chip Breaker apply uniform pressure on uneven stock, coupled with a Driven Outfeed Roller to keep your stock in place. -- 3-speed gear box for perfect feed rate, 20-25 and 30 FPM. -- Powerful 15 HP 3-Phase motor.

OMAB GRU-100 (BACCI Style) 4-Spindle Copy Lathe/ShaperSpecifications: -- Capacity: (4) Spindle duplicating/carving/copy heads with (4) copy belt sanders for asymmetrical parts. Max. working height: 6.5" (165 mm), max length capacity 39.4" (1000 mm). -- Speeds: (3) Carriage speeds: 3 IPM (75 mm/Min)_up to 7.87 IPM (200 mm/Min). Spindle speeds: 25 minimum to 42 maximum RPM. Features: -- Carriage feed motor 1.8 HP. Cutter drive motor 2.2 KW (3.9 HP). Bell cutters 1.38" (35 mm), Minimum working radius 0.71" (18 mm). -- Comes with: Installed cup-style cutters. -- NOTE: Larger diameters are possible by using every second carriage position, i.e. (2) heads instead of four heads. -- Dimensions approx 94" long x 37" wide x 78" High . Weight about 2400 lbs NOTE: Specifications are from similar BACCI lathes and need to be verified prior to purchase.

OMAL HBD 2500 CNC BORE, GLUE & DOWEL INSERTER: Specifications: -- NC Controlled, automatic step-by-step boring, glue injection & dowel insertion into panel components: Drawer parts, chair pieces, etc. at random spacing or automatic hole-spacing with simple what-if statement: i.e. parametric programming.Working Capacity: -- 2,500 mm (98.4") In the X-axis; 30 mm (1-1/4") stroke in the Y-axis; 10 mm - 40 mm (0.39" - 1.57") thickness capacity in the Z-axis. (4) Working zones: Center fence and both side fences dropdown for 2- or large 1-zone operation.Tool Plate Configuration: -- X-Axis rack & pinion drive CNC Controlled; carriage speed of 90 MPM (295 FPM); Y- & Z-axis: Manual ball screw with digital indicators.Equipped with: -- (1) Horizontal drilling unit with: 3/4 HP - 6,000 RPM Motor; (1) gluing & (1) dowel insertion unit.Control System: -- PC Numerical Control operating system; Windows/XP, color video flat screen monitor; 40 GB hard drive; keyboard & mouse. -- Graphic operator inter-phase, parametric programming standard; OMAL patented "SURE SHOT" Revolver System with fiber optic sensor to guaranty reliable dowel presence & insertion.Complete with: -- (1) 18-Liter (4-3/4 Gallon) cap.; high pressure glue tank. -- (1) 18-Liter (4-3/4 Gallon) cap.; water tank (for cleaning). -- (1) Vibratory Dowel Hopper, (6) pneumatic hold-down clamps; machine is setup for 8 mm dowels.

OMAL - INSERT 900, ...CNC Point-to-Point Bore, Glue & Dowel InserterSpecifications: -- Capacities: X-Axis 900 mm (35.44"); Y-Axis 40 mm (1.57") stroke; Z-Axis 10 - 40 mm (0.39" - 1.57") thickness. -- Table size; 15-5/8"; x 49"; x 35"; H; (4) working zones: (2) 450 mm (17.72") W. -- Max. dowel size: 8 mm Dia. x 30 mm L (0.31" dia. x 1.18" L). -- Max. dowel projection: 15 mm (0.59"). -- Spindle speed: 6,000 RPM. -- Cycle time: 0.8 Sec.Equipped with: -- (4) 2-1/4" Dia. pneumatic hold-downs. -- (1) Horizontal drilling unit with: 3/4 HP - 3,380 RPM TEFC Motor; (1) glue injection unit & (1) dowel insertion unit. -- PC-Based controller with: 12" Display; (2) foot pedal controls.Complete with: -- BROVIND VIBRATORI "OB 300 DC": 14" Dia. x 5-1/2"; D vibratory Bowl Feeder with: "NC-02M-50 DC" Variable Speed Controller. -- (1) 8 L Cap. High Pressure Glue Tank; (1) 8 L Cap. Water Tank. -- METROLOGIC "Voyager CG MS9540" Handheld Bar Code Reader.NOTE: Machine control is currently not operational; Seller believes it is its battery.

OMAL VELOX 1300 CNC BORE, GLUE & DOWEL INSERTER + Optional LASER MEASURING DEVICE: Specifications: PLC Controlled automatic step-by-step, boring, glue injection & dowel insertion into panel components, drawer parts, chair pieces, etc., at random spacing. Features:"Optional" Auto Laser measuring device with Parametric Control. Touch Screen PLC control. Working Capacity:51" (1,300 mm) In "X" axis work area, 1.57" "Y" axis stroke with manual depth setting, 1.57" "Z" axis stroke with manual vertical settings. -- 10 mm to 30 mm (0.39" - 1.18") Material thickness capacity in the "Z" axis. -- Machine is currently set up for 8 mm dia. x 30 mm long max. dowel dimension.Work Areas:(2) Loading zones with a cycle time of one second for each bore, glue and dowel insertion when holes are on 32 mm intervals. -- Equipped with a brushless motor, ball nut and ball screw for quick positioning, Dowel Inserter:OMAL "SURE SHOT" revolver system guarantees a dowel is inserted every time. (1) Dowel insertion unit with 8 mm diameter dowel capacity -- Standard dowel dimension is 8 mm x 35 mm, Maximum dowel length is 40 mm, Maximum dowel projection is 14 mm.Operator Interface:Touch Screen Control for writing and storing programs & is programmable in the "X" axis. -- Graphics programming 2.5D with simultaneous working display; Automatic Mirror-Image (left and right) programming; Parametric programming; Graphical aid.Internal self-diagnosis; Historical report of alarms, Complete with:(2) Working zones, (1) horizontal drilling unit, (1) gluing, (1) dowel insertion unit. (1) 8-Liter cap. high pressure glue tank, (1) 8-liter cap. water tank (for cleaning), (1) Vibratory Dowel Hopper, (4) pneumatic hold-down clamps, Dual foot pedal controls. -- Actual Model is OMAL VELOX 1300

OMAL - INSERT 900, ...CNC Point-to-Point Bore, Glue & Dowel InserterSpecifications: -- Capacities: X-Axis 900 mm (35.44"); Y-Axis 40 mm (1.57") stroke; Z-Axis 10 - 40 mm (0.39" - 1.57") thickness. -- Table size; 15-5/8"; x 49"; x 35"; H; (4) working zones: (2) 450 mm (17.72") W. -- Max. dowel size: 8 mm Dia. x 30 mm L (0.31" dia. x 1.18" L). -- Max. dowel projection: 15 mm (0.59"). -- Spindle speed: 6,000 RPM. -- Cycle time: 0.8 Sec.Equipped with: -- (4) 2-1/4" Dia. pneumatic hold-downs. -- (1) Horizontal drilling unit with: 3/4 HP - 3,380 RPM TEFC Motor; (1) glue injection unit & (1) dowel insertion unit. -- PC-Based controller with: 12" Display; (2) foot pedal controls.Complete with: -- BROVIND VIBRATORI "OB 300 DC": 14" Dia. x 5-1/2"; D vibratory Bowl Feeder with: "NC-02M-50 DC" Variable Speed Controller. -- (1) 8 L Cap. High Pressure Glue Tank; (1) 8 L Cap. Water Tank.