15" color "Touch Screen" with Industrial Computer for setup and running CNC control of machine setup in less than one minute All components sized to handle 6x30 dowels Three v-groove heads with minimum 4" center to center Three banks of nine spindles for drawer front drilling One additional nine spindle bank to handle four sided drawers Two nine spindle horizontal banks for dowel drilling Runs up to 22 parts/minute in production Application Ability to v-groove drawer parts from 25" to 96" in length Ability to run parts as short as 10" without v-groove Ability to handle parts from 2-1/2" to 13-3/4" in width Ability to handle material thicknesses of 7/16" & 1/2" Makes box drawers with dowel construction Makes box drawers with 3 miters & 1 butt joint CNC Setup of machine Hopper loading of parts Parts feed through to the rear of the machine Like New Machine has run less than 100 parts. NEW PRICE: $235,000

15" color "Touch Screen" with Industrial Computer for setup and running CNC control of machine setup in less than one minute All components sized to handle 6x30 dowels Three v-groove heads with minimum 4" center to center Three banks of nine spindles for drawer front drilling One additional nine spindle bank to handle four sided drawers Two nine spindle horizontal banks for dowel drilling Runs up to 22 parts/minute in production Application Ability to v-groove drawer parts from 25" to 96" in length Ability to run parts as short as 10" without v-groove Ability to handle parts from 2-1/2" to 13-3/4" in width Ability to handle material thicknesses of 7/16" & 1/2" Makes box drawers with dowel construction Makes box drawers with 3 miters & 1 butt joint CNC Setup of machine Hopper loading of parts Parts feed through to the rear of the machine Like New Machine has run less than 100 parts. NEW PRICE: $235,000

Accu-Systems MMTJ Door Machine

75 KVA 480 volt to 240 volt

Action Pac Mulch Bagging Line Per manufacturer: Seal 480 Bags per hour Can also fill bulk totes Purchased new in 2021. Never installed into production.

AdcoWest Sawmill Canter - REFURBISHED - Equipped with Keyknife chipping heads including power - (3) 40 HP Heads and (1) 20 HP (lower head) as specified by head manufacturer No wiring, switches, set works, or controls included but electric motors present are included. Feed through system as engineered by AdcoWest and operated by prior owner. (no infeed table included or feed through chain power) All other feed trough motors are included.

AEM 36" Sander

AER 5,000 CFM Dust System

There are two drums and burners that will be sold as one package. They are ready for immediate removal: - 13x60 Stainless Steel Drum - Dual 70 million btu natural gas burners, max thermal output of 42.200.000 kj/h, discharge cyclone, multi-clones, fans with motors, stack, all relating ducting and steel structure. - These dryers are fired with natural gas or propane. Main cyclone at discharge of dryer has 3.66m diameter, secondary multicyclones (8/dryer) are 1.07m diameter each, stack is 37m above grade, Volumetric airflow rated 30.68 cubicmeter/second. Equipment plant drawing, manuals and blueprints available when system is purchased.

5 HP Mist Collector 460 volt 3 phase

Morbark Trailer Tipper

Alpha Brush KS-LS Sander

Altendorf F45 Elmo Sliding Table Saw

Altendorf Sliding Table Saw

Stage #1 48” width 2 lights Stage #2 40” width 3 lights 220 volt singular phase

ABM Tie Cutoff Merchandising and Tie Sorting System Very Low Hours 26" Saw Blade w/15HP Electric Motor 12" x 9" Capacity Infeed/Outfeed Rollcase 12" x 10' w/3 Air Operated Stops and Pop Up Transfer Infeed/Outfeed Rollcase 12" x 8' w/3 Air Operated Stops and Pop Up Transfer 12" x 8' Rollcase w/2 str 27" x 5' Pop Up Transfer 12" x 15'8" Rollcase w/2 str 27" x 5' Pop Up Transfer and Air Stops 12" x 21' Rollcase With (2) 2 str 27" x 5' Pop Up Transfer and Air Stops

American Wood Dryers Kilns

The seller has confirmed that these (2) Amitec VT veneer slicers are in good working/running condition. They are ready to load! - (2) Available - Slices log cants in the lengthwise direction - Compares to the Marunaka SL-250 - 9-7/8" (250mm) Max lumber slicing width: With up to 9-7/8" high cant, veneer thickness 1/25" to 3/8". 75° knife angle with 18 ° knife bevel - Knife length: 46-1/2" (1,180mm) - Motorized upper feed beam with Continuous belt feed - Variable speed: 120-180FPM (40-60 m/min) - 30HP feed motor - Head elevator: 1HP - Approximate weight: 16,000 lbs - 327"L x 62"W x 75"H

#4 LH Armstrong bandsaw grinder with Digicam. The customer has the Digicam software disk for the grinder.

Used Armstrong #4 Motorized Bandsaw Stretcher Roll Needs lower arm pillow block and roller chain