Equipment For Sale

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! This machine has an operating weight of 4,000 lb, a Kubota engine with horsepower of 16, steel tracks with rubber pads. Retractable track width for narrow spaces makes it easier to get into those tight spots. Machine can be sold with a bucket, hammer, and an auger!! Shipping Not Included- Call For Pricing!

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! Engine powered by a Kubota D902.2. High end hydraulic system? load sensing hydraulic system, with high pressure, high efficiency and fast action response.? full hydraulic pilot joysticks, excellent control performance. ? automatic speed control travele motor, with high traveling speed ? tailless swing for safe work in a narrow space.? stretchable undercarriage, which can pass through 1m wide door or channel.? offest boom, the construction area is fully covered without dead corners.? attachment expert, standard equipped with piping for additional hydraulic function ? boom cylinder is placed on top to effectively prevent collision.? undercovered pipings, without collision risk. ? convenient maintenance, and daily maintenance areas can be reached easily. Shipping Not Included- Call For Pricing!

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESSES AND INDIVIDUALS! Engine powered by a Kubota D902.2. High end hydraulic system? load sensing hydraulic system, with high pressure, high efficiency and fast action response.? full hydraulic pilot joysticks, excellent control performance. ? automatic speed control travel motor, with high traveling speed ? tailless swing for safe work in a narrow space.? stretchable undercarriage, which can pass through 1m wide door or channel.? offest boom, the construction area is fully covered without dead corners.? attachment expert, standard equipped with piping for additional hydraulic function ? boom cylinder is placed on top to effectively prevent collision.? undercovered pipings, without collision risk. ? convenient maintenance, and daily maintenance areas can be reached easily.

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESSES AND INDIVIDUALS! Engine powered by a Kubota D902.2. High end hydraulic system? load sensing hydraulic system, with high pressure, high efficiency and fast action response.? full hydraulic pilot joysticks, excellent control performance. ? automatic speed control travele motor, with high traveling speed ? tailless swing for safe work in a narrow space.? stretchable undercarriage, which can pass through 1m wide door or channel.? offest boom, the construction area is fully covered without dead corners.? attachment expert, standard equipped with piping for additional hydraulic function ? boom cylinder is placed on top to effectively prevent collision.? undercovered pipings, without collision risk. ? convenient maintenance, and daily maintenance areas can be reached easily.

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESSES AND INDIVIDUALS! Engine powered by a Kubota D902.2. High end hydraulic system? load sensing hydraulic system, with high pressure, high efficiency and fast action response.? full hydraulic pilot joysticks, excellent control performance. ? automatic speed control travele motor, with high traveling speed ? tailless swing for safe work in a narrow space.? stretchable undercarriage, which can pass through 1m wide door or channel.? offest boom, the construction area is fully covered without dead corners.? attachment expert, standard equipped with piping for additional hydraulic function ? boom cylinder is placed on top to effectively prevent collision.? undercovered pipings, without collision risk. ? convenient maintenance, and daily maintenance areas can be reached easily.

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESSES AND INDIVIDUALS! Engine powered by a Kubota D902.2. High end hydraulic system? load sensing hydraulic system, with high pressure, high efficiency and fast action response.? full hydraulic pilot joysticks, excellent control performance. ? automatic speed control travele motor, with high traveling speed ? tailless swing for safe work in a narrow space.? stretchable undercarriage, which can pass through 1m wide door or channel.? offest boom, the construction area is fully covered without dead corners.? attachment expert, standard equipped with piping for additional hydraulic function ? boom cylinder is placed on top to effectively prevent collision.? undercovered pipings, without collision risk. ? convenient maintenance, and daily maintenance areas can be reached easily.

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALRSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! 2020 Shantui DH13K2 dozer has an operating weight of 32,850 lb, 154 hp measured at 2200 rpm, mx fwd speed of 6.2 mph, max rev speed of 6.2 mph. Some key features for this machine include the enclosed cab with heat and A/C and the power angle tilt. Shipping Not Included- Call For Pricing!

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALRSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! 2020 Shantui DH13K2 dozer has an operating weight of 32,850 lb, 154 hp measured at 2200 rpm, mx fwd speed of 6.2 mph, max rev speed of 6.2 mph. Some key features for this machine include the enclosed cab with heat and A/C and the power angle tilt. Shipping Not Included- Call For Pricing!

SHENG-SHING - SDM-15 ...Wide Belt Sander (Open Ended)15" Single Head Wide Belt Sander with open end for up to 30 " capacity. -- Sanding Head: 15" Wide (30" cap. with 2-pass); 8" Helically Grooved Rubber Covered Contact Roll with 7.5 HP Drive. -- Features: 0" - 6" Part thickness cap., 2-speed conveyor feed 12 or 16 FPM; 16" x 48" Abrasive belts with air tensioning, pneumatic abrasive belt tracking.

SHENG-SHING - SDM-25, ...25" Wide Belt Sander1-Head; 24" width cap.; rubber-covered contact roll; approx. 10 HP motor. -- Abrasive belt size 25" x 48" with: Air tensioning & electronic abrasive belt tracking. -- 5-1/2" Max. height opening with: Manual raise & lower; variable feed speed drive. -- Complete with: Magnetic controls & dust outlet.

--This machine is in an Auction on exfactoryauctions.com-- SHODA MAXXIM 5' x 10' 2-Head CNC Router, with Vacuum Pump – Seller states that machine was run (1) shift from 2002 - 2006, then only a few days per year since! Specifications: Table size 63” x 122” x 29” H, with 3/4” Thick Top. Travels: X-Axis 133", Y-Axis 73", & Z-Axis 10". Max. machining feed speed 590 IPM. Max. positioning speed for X & Y-Axes 1,180 IPM. Equipped with: Moving single-zone vacuum table, with Extra-hard phenolic surface, Front-to-back configuration. (2) 12 kW (16 HP) - 18,000 RPM BT-30 Air-cooled electro-spindle, with Variable spindle speeds 3,000 - 18,000 RPM, AC Inverter, Dynamic spindle braking, Air/Oil mist lubrication. 16-Position Carousel-type automatic tool changer. Features: All Axes with Extra-large precision contour linear guideways. Closed loop AC Servo drives & Precision ground ball screws. Extended extra heavy-duty bridge for full 5' x 10 table coverage. Centralized lubrication system for all spindle & roller bearings, ball screws & guides. Operator Control: FANUC "SERIES 21i-M" Mobile CNC Control, with 10.4" Display, RS-232 Port, PCMCIA Slot, (3) Axes Simultaneous control, Manual pulse generator, Inch & Metric operation, Feed rate & Spindle speed override, Helical interpolation, Full cutter compensation, Background editing features, EIO/ISO recognition. Foot pedal control. Complete with: 2001 TRAVAINI "1-501V1A-460" 40 HP Vacuum Pump, S/N S1433, with Hour meter reading 17,003 Hrs. (10) Toolholders. Dust Manifold. Dimensions without Safety Rails: 202" x 155" x 110" H. Dimensions of Vacuum Pump: 82" x 36" x 65" H.

2022 ShopBot PRS5 Alpha ATC CNC Router Features include a 5 HP Automatic Tool Change Spindle, 9-Position Tool Changer, ISO30 Tool Holders with ER32 Collets, and a 4’ x 8’ Table with Actual Movement Dimensions of 49” x 103”. The table is vacuum hold-down capable. • Purchased new in January 2022 • Lightly used for one year and unused for the past year • Currently in its original location • Excellent Condition

Shopbot CNC Router

Gooseneck Trailer Believe its custom built Tandem axel Ramps Tires look decent Not sure about brakes but all lines are intact

SHOP BUILT ROLL CASE

Only 40 Hrs. Run Time! Shop Fox W1812 Planer Moulder Specifications: 12" Open-sided Mini Planer/Moulder offers smooth moulding and planing. 2 HP Motor belt drives head for 7,000 RPM spindle speed. Very smooth operation with a variable feed rate of 0-18 FPM. Cutterhead Diameter 1-1/4"² Max. material width 6.75"; also planes 7.5" wide. Easily handles material thickness from 1/4" to 7-1/2" max. 9" Min. stock length; max. profile depth 3/4" and max. profile width 6-3/4". Comfortable table working height of 31". Includes: Sturdy work "stand" Front-mounted On/Off controls. NOTE: Above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

SHOP FOX W1678 Heavy Duty 26" 2-Head Drum SanderSpecifications: -- Heavy Duty 26" 2-Head Drum Sander. -- 24" Wide thick conveyor belt, similar to the ones used with Wide Belt Sanders. -- (2) drums 6" x 27-3/4". -- Enclosed fabricated steel base with easy access doors. -- 5 HP Single-phase motor that drives both sanding drums. -- 1st Head for coarse; 2nd head for fine sanding. -- Independent adjustment on both heads. -- Variable Speed conveyor , 0.25 HP feed drive. -- 0" - 4-1/4" Thickness cap. with manual hand wheel adjustment. -- (2) Each rubber covered infeed & outfeed rollers. -- (2) Dust outlets and push button magnetic controls.

SHRED-TECH - ST100, ...Dual Shaft ShredderNew in 2019Specifications: -- Motors: (2) 50 HP. -- Cutter width: 1.5" Approx. -- Cutting Chamber: 32" x 60". -- Control Panel. -- Mounted on stand. -- The ST-100 Industrial Shredder is a complex, heavy-duty shredder machine that features a 32"; x 60"; cutting chamber, enabling it to handle a wide range of products and bulky wastes. It can tear through tougher loads, such as wooden pallets, metals, hazardous wastes, passenger tires, and more.Once these products go through our shredder, they end up in a smaller, optimum shred size. It works with a large-duty throughput of up to 3 tons per hour, working much more efficiently for the business

SHRED-TECH - ST20, ...Dual Shaft ShredderSpecifications: -- Motor: (1) 20 HP. -- Cutter width: 3/4" Approx. -- Mounted on stand. -- Feed Hopper.

SHREDPAX AZ-45 Dual Shaft ShredderSpecifications: -- QTY 2 20 HP Motor -- Voltage 480 V, 60 Cy, 3-Ph. -- Dual Shaft -- Support Stand IncludedLoaded on your truck