Equipment For Sale

2014 Takeuchi TL8RW Skid Steer with 2,510 hours. 74.3 HP on Diesel powered Kubota Engine, 2,100 lbs Lift Capacity (35% Tipping) 3,000 Lift Capacity (50% Tipping). Max travel speed 4.6 mph. Dump Height 93.3 in. Dump Reach 28.7 in. Operating Weight 8,630 lbs Height 83.9 in. Width 62.2 in. Length 135.1 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 TALBERT 50 TON LOW BOY GOOD TIRES GOOD BRAKES GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CONDITION GRANITEHE.COM

2007 Talbert DW-55 SA Utility Trailer Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Talbert Lowboy -GVWR 95,600 GAWR ALL axles 20280 -255/70R22.5 LRH 22.5x8.25 rims at 828. KPA 120 PSI COLD DUAL -Model TLW-35-FG-Bvt1 35 ton capacity 29ft long on flat bed by 8’6” Spring suspension -35 ton capacity -29ft long on flat bed by 8’6” -Spring suspension

TANA- SHARK 440DT, ... Portable Dual Shaft ShredderSpecifications: -- Approx 3900 Hours and New in 2015 --Bolt-on cleaning combs for easier maintenance --Magnet conveyor improvements - Discharge side to be selected from TCS + hydraulic magnet adjustment during operation --Rated power (SAE J1995) 399 kW (535 bhp) @2100rpm --Nominal torque 324,530 ft-lbs 440 kNm --Rotor length 9 ft 10 in --Number of rotor knives 33 / 44 --Screen sizes Available from Tana- 1.9", 3", 3.5", 3.9", 4.3", 4.7", 5.5", 6.6", 8.7", 10.8" --Screen area 29.6 sq ft

16" Blade cap., 3-3/4" max. cutting height, 5 HP - 3,600 RPM direct drive motor, arbor tilts 45ø, 44" x 40" cast iron table size, table with miter gauge slot. -- Complete with: Rack & pinion fence and large hand wheels for easy adjustments.

Runs good and is still in operation Hooked up to 460 Table Extension has been repaired Main table has almost zero wear on it.

TANNEWITZ - XJ, ...Table SawSpecifications: -- 5 HP - 3,600 RPM Fan cooled motor, 1" right tilting arbor Table Saw with a 1-piece main table; table size 42" wide x 44-1/2" deep. -- Base formed from hot rolled steel of 5/16" thickness & welded into (1) solid unit; 10" dia. handwheels for easy adjustment of tilting, raising & lowering of arbor. -- Complete with: Extended rack & pinion adjustable rip fence for greater ripping capacity; left- & right-hand T-slot miters. -- 16" Blade dia., 4" dado width cap.; 4" cut depth at 90°; 3" cut depth at 45°. -- Equipped with: Taper pin miter with micrometer adjustment on fence, magnetic controlled off switch, and 6" dust outlet with auxiliary rear opening for easy access. -- Power safety electrical breaker box included. Please NOTE: No blade guard.

JLT Clamp 713A-8-LCS (8) Section Large Capacity Door ProLarge capacity (8) section rotary door clamp for the medium to large cabinet shop. Produce up to 400+ cabinet doors per day. -- Each section includes: 38" x 96" maximum clamping capacity w/ 2-1/2" high jaws, (4) vertical clamps and (2) horizontal clamps. --Clamp & Square Multiple Cabinet Doors with Vertical Center Rail – (2) 38″ x 45″ Doors Side by Side Double Door Clamping. -- Includes: Heavy-duty, pneumatic drive for rotation, pneumatic clamping and squaring assembly.Actual model # 713A-8S-129W-68H-80D-NS-M-LC-L-M2

TAYLOR 6 Section Pneumatic Clamp Carrier6-Section x 10-1/2' width cap.; (36 clamps total), 30" opening on clamps, 3-1/2" high jaws; with pneumatic rotation, tightening, and panel flattening. -- Overall assembled dimensions: 9' 6" deep x 13' 6" wide x 9' tall.Tear down not included

--In Auction: https://exfactoryauctions.com/Detail/CR-230068/event/A122024$1 --No Reserve!-- TAYLOR 800036 7' W 12-Section Semi-Automatic Pneumatic Clamp Carrier, with Flattener & Tightener Equipped with: (71) 32” Cap. Clamps, with 4-5/8” W x 3-1/2” H Jaws. Air motor drive. Dual foot pedal control. Complete with: Pneumatic Panel Flattener. Pneumatic Clamp Tightener.

TAYOR 16-Section Clamp Carrier 20.5' width cap., (7) clamps per section (128 clamps total). .48" max. clamp opening clamps with 4-1/2" X 3 1/4" jaw height (128) Rocker plates 4" X 6" @ 80-1706 (purchase in June 2024)Complete with: -- Semi-automatic clamp tightening, -- (2) Air drive carrier rotation. -- (2) Pneumatic panel flattener -- OAL approx. 24' X 14' X 12'Note: The buyer will be responsible for tear down and loadingMachine model CC 20,5-16-481

Taylor Forklift tight machine

TAYLOR - 20-Section: Clamp Carrier Specifications -- 8-1/2' Width cap. -- 39" Max. clamp opening; 2-1/2" Jaw height. -- Approx. (4) clamps per section.Equipped with: -- (75) Clamps total. -- Pneumatic tightener. -- Pneumatic panel flattener.Complete with: -- Air drive carrier rotation. -- I-Beam chain assembly.NOTE: Already taken down.

TAYLOR 40 Section Clamp Carrier.Specifications: -- 40-Section, 8-1/2' width capacity -- Average 4/5 clamps per section (175 clamps total), all with 32" max. clamp opening. -- Equipped with (175) clamps plus a pallet of spares that require repair, 32" clamps with 2-1/2" high jaws .Complete with: -- Heavy Duty Drive for rotation,& clamp tightening. -- Foot pedal control. -- Includes a glue applicator.

Capacities: 11” minimum length 98” maximum length 1” minimum width 32” maximum width 5/8” minimum thickness 3” maximum thickness with a conversed glue spreader(model 30J)

Taylor Forklift, runs & works good

MLS Number 13019231 2018 Taylor X330S Forklift 8991 hours 33,000 pounds capacity 48,600 chassis weight 114" forks 132" lowered height 236" max height Tires 100% SS/FP

1968 Taylor Cable Skidder 453 Detroit New Front Tires, 90% Rears Bear Claw Chains Front and Rear At 75% Runs and Operates Good

MLS Number 13438554 2019 Taylor XH-350L Forklift 18529 hours 28,400 pounds capacity 57,040 chassis weight 102" forks 180" Max fork height Sideshifter, fork positioner Dual pneumatic tires Drive 100% Steer 50% 4 hydraulic functions