Equipment For Sale

DEUTZ TD 2.9 L04 (60HP) LARGE CAPACITY BIOMASS HOPPER 78'9" DRUM CENTRES GIVING A MAX STOCKPILE HEIGHT OF 34'6" AT 25 DEGREES 42" WIDE 3 PLY BELT HYDRAULIC FEED HEIGHT ADJUSTMENT HYDRAULIC FOLD FOR TRANSPORT CRAWLER TRACKS WITH PENDANT CONTROL SYSTEM 2 SPEED TRACKING LOW LEVEL GREASING

Engine: Cummins Turbo Diesel Transmission: Fuller 8 speed with cruise control Boom: 33.75' to 105'. 4 - section full power main boom Planetary Reduction Gearing Electronic Rotation Indicator Cab: Steel Operator's Cab w/air suspension seat 360 Degree Swing Transport Length: 35.34ft Transport Width: 8.01 ft Transport Height: 10.77 ft Width with outriggers extended: 22.02 ft Carrier Length: 32.42 ft

2019 Terramac Rat9 Track Dump With 600 hours, A/C &Heat, Radio, Work Ready. Machine Weight (with rock bed) 26,180 lbs. Full Length 19’ 6” Full Height 9’ 11” Width Over Tracks 8’ 3” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

TERCO NORTHSTAR 10-8 Spindle Carver.8-Spindle Carver with 10" center-to-center chuck spacing. -- (2) 0.5 HP - 3,450 RPM spindle motor direct "belt drives" spindles for 11,000 RPM rotation. -- 36" Long carving cap, with optional length extensions up to 72". -- Manual rotation for round parts. -- Operator manually traces the pattern details of the master with copying stylus. -- Capable of doing both base relief (flat backed) and 360° full round carving. -- Includes: (1) Set roughing bits, (2) sets finishing bits, tools, and manual.

CMS represents Big on Dry (BOD) Thermo Wood Kilns in the USA. This system is another on elf our customers in the USA who is producing mostly poplar and oak decking. Big on Dry has improved the Thermo-Modification process with their THERMOWOOD (THW) line and provides complete "turn key" systems. The PLC control systems allow programming for a wide variety off wood applications. This allows the same systems to work with very delicate wood that is hard to treat to thicker wood that will be used for outdoor products. The THW system can also be used as a conventional kiln with steam. Basic systems include: - Kiln completely built with stainless steel and aluminum - Initial humidy of 10-15% is reduced to 5-6% - Loading options: Side or Trolley - Heating options: Gas or Wood Burner - Humidification: Combined Spraying System

Table Size: 5' x 10' Spindle: 18 HP HSD Max. Spindle Speed: 18,000 RPM Number of Axis: 3 Gantry Clearance: 10.5? Z-Axis Stroke: 6? Power: 460 V, 3 Phase Approx. Shipping Weight: 12,000 Lbs. Approx. Shipping Dimensions: 7' W x 16' L x 8' H Equipped With: Roller hold down 5 position Typewriter Arm Style Tool Changer Daylight touch off sensors Equipped for Vacuum Hold Down Windows 2000 Operating System

THERMWOOD CS 40 CNC Router, 4 X 8 with ATC:Under power for inspection!4' x 8' Moving table machine in a front-to-back configuration with single-zone vacuum plenum. -- Equipped with:(1) 10 HP HSD, ISO-30 type routing spindle, variable spindle speed from 3,000 - 24,000 RPM, 5-position "typewriter-style" ATC mounted on the front of the spindle, and (4) position wine rack at rear of table. -- Features:High-performance closed loop SEIMENS AC Servo motors driving precision ball screws on all axes with TURBO motion for feed speeds up to 2,400 IPM on the X- & Y-axis and 600 IPM on the Z-axis. -- Control:THERMWOOD "91000" PC Based control with WINDOWS/2000 operating system, 3-axis simultaneous motion, handheld programmer with feed rate & spindle speed override. -- Features:Color monitor, large hard drive, CD ROM drive, 3-1/2" floppy disk drive, keyboard, RS-232 port for PC communications, mounted in an air-conditioned Nema-rated control cabinet, E-CABINET software ready. -- Complete with: 18 HP BECKER vacuum pump, assorted tool holders, and documentation.

5X10 table typewriter style tool changer at the head. 5 tools bar style tool change 4 tools c - axis at the head also for aggregate tools. 480V/60HZ

Twin tables 5×10’ aluminum X axis: 124” Y axis: 124” Z axis: 36” Rotation: 360 degree Tilt: 270 degree 10 hp Spindle ISO: 30Equipped With: 6 Position Tool Changer Auto Lubrication Thermwood Super Control CAD/CAM Auto Tool Length Sensor

Thermwood C42 CNC Router (2) 5'x5' Tables It has 2 large routers, 4 smaller routers, and 2 aggregate heads in the turret Travainni Vacuum Pump Note from Seller: Includes two shaper heads that are not mounted into the turret and one pneumatic drill head that is not mounted into the turret. I also have one seat of Microvellum cabinetry program that I will transfer to you along with the purchase.

(1) 12 HP 3000-24000 RPM HSD Spindles (1) At The Head Style Automatic Tool Changers

Thermwood Model M90-510 5-Axis CNC Router Less then 20 hours on this system - only installed and training. Ready to be removed!

MLS Number 11772789 2015 Thermwood FB53-510 CNC Router Very good working condition Low hours. Used for only 1 year. Excellent condition Moving gantry, fixed table, roller hold down CNC router Designed to machine low profile sheet materials(MDF, plywood, particleboard) Uses Microsoft Windows 10 Professional operating system

Thomas Return Conveyor This was used behind a Holzher Edgebander

THOMAS TURNBAK Return Conveyor for EdgebandersTHOMAS "Turnbak" 90" L x 120" W Automatic Return Conveyor: Left-hand feed, right-hand return layout. - Adjustable table pass-line, 32" to 38" height. -- Infeed Receiving Conveyor: 90" L x 120" W with 49" W; line-shaft PVC covered rollers. Rollers 1-7/8" dia. on 4" centers. -- Return Conveyor: (3) Sections; 84" L x 49" W, and (1) section 60" L x 49" W; powered return conveyor; line shaft driven; PVC covered rollers. -- Transfer Table: Pneumatic actuated automatic table pop-up with photo-eyes. (12) 1/2" Dia. rubber cross conveyor belts (dimensions 90" L x 49" W). -- (3) Transfer belts need replacing. -- Includes: (1) Section of 48" L x 49" W; non-powered Return Conveyor. -- LEESON Inverter with: 2 HP LEESON Motor. -- With: Adjustable control system and operator manual. -- The transfer process occurs on a continuous basis. -- (3) Transfer belts need replacing. NOTE: Needs(3) Transfer Belts; actual model number: 90 x 120 4C

THOMAS MFG TURNBAK R1 70x96 Return Conveyor System:Line shaft powered roller (PVC covered) for LEFT-HAND Feed & RIGHT-HAND Return Conveyor System. Specifications: -- 70" Long x 96" Wide receiving table; transfer system will handle a panel 96" long x 62" wide max. size (min. 6" x 6"); -- Variable speed up to 120 FPM. -- Automatically receives-and-transfers panel with (10) transfer belts onto the return side and onto a 36" wide & 96" long return conveyor. (approx. 8' long) which conveys panel back to the operator. -- Variable speed from 0 - 120 FPM. -- NOTE: Was previously attached to & used with a 2014 Biesse Akron 1440A Edgebander, see EXF Listing ..."EO-012637"

Thompson Lane Saw Guide Milling Machine

thompson-Lane Saw Guide Milling Machine S/N 9 3 1

TIERNEY 10" Gang Saw