Equipment For Sale

MLS Number 10109396 Trojan 2500 Wheel Loader Detroit 6V92 Engine Forks With Log Clamp 23.5-25 Tires Brakes need repair. Seller has needed parts. Includes manuals and spare parts.

Troyer Machine Dust Blower Size 26, Inlet Size 12", Outlet Size 11" w/Electric Drive and 12"x10' Incoming Pipe and 11"x4' Outgoing Pipe w/Square Adapter

Trygg Ring Logging Chains 23.1x26 1 set for fronts or rears Brand new Never opened drums

Trygg Ring Logging Chains 30.5x32 Pair Brand new Never opened drums

TSM 18' LH Drop Saw Trimmer w/Pneumatic Operated Saw Ladders, 22" Dia Saw Blades, 14' L Infeed w/Even Ender Rolls, Dual Hyd Operated Even Ender Stops, 6 Strand 20' L Lugged Incline Slanted Deck w/Even Ender Rolls, On Board AB 300 Amp MCC, Hyd Power Pack & Dust Extraction Manifold. TSM 24" x 24' x 9.5" Deep Vibratory Conveyor w/Drive. TSM Drop Down Lumber Inspection Station w/7 Strand 36' Staging Deck w/Board Dealers, Board Turners, Operator Platform, Drives, Control & Tally Console. TSM Dual Transfer Decks 10' x 45' 5 Strand w/78 Rooftop Chain & Drive, 12' x 12' 5 Strand w/3' Pop Up Bypass Transfer Gate, Has Common Drive Shaft with 1st Deck. TSM Lower Drop Down Lumber Inspection Station w/7 Strand x 25' Staging Deck w/Board Dealers, Board Turner, Operator Platform, Drives, Control, Tally Console, 17' 4 Bar Unscrambler & Even Ender Rolls. 11' 2" x 16' 5 Strand Transfer Deck w/130 Rooftop Chain, Stops & Drive. TSM 10' 4" x 25' Transfer Deck w/78 Rooftop Chain & Drive. Scan Meg Scanner w/Office Hard Drive, Software, Tally Recording System & Printers. TSM LH 16' Drop Saw Trimmer Outfeed Transfer Deck w/Even End Rolls, Decline Deck, Pop Up Bypass Transfer Sweeps on 2' Segments. Markem 5000 Series Case Coding Ink Jet Printer w/2 Applicator Heads. Mattews Jet-A-Mark Mdl D0D-8400E Board Grade Marking System.

TSI - TCI 100 Portable Tire CutterSpecifications: --Powerful tire cutter simplifies tire disposal --Eliminates whole tire pick-up costs --Cuts tires (including steel-belted radials) into 4 pieces at a rate of 120 per hour when using the optional T-100-14 passenger tire compressor --Cuts heavy truck tires and Super Singles at a rate of 40 per hour --Dimensions L x W x H (in.) -90.0 x 66.0 x 114.0 in --New in 2024

Turner Machinery Company Resaw Good Condition

Twin City Fan Blower Air Lock Can BE Added For Additional Cost

3000 CFM 5 HP 5-1/2” static pressure

TWIN FLOW Air Make-Up Unit 7,000 CFM. Vertical mount with Remote Control Panel: -- CFM: 7,000 CFM @ 1.75" ESP, 5HP/575v/3ph/60Hz TEFC motor -- BTU: 0.68 MBTUH -- Burner: MAXON burner -- Temperature Control: 80º F temperature rise in spray cycle -- Mounting: Vertical, outdoor/indoor mounted -- Fuel required: Natural gas, 0.3 PSI pressure -- Intake/Discharge: Vertical, screened, air intake with vertical discharge -- Filter Sections: V-Bank style with 1’’ cleanable air intake disposable type filters -- Gas Control: Control cabinet and pre-piped gas combustion system mounted on burner section to FM, Electronic Modulation -- Specifications includes: Digital Temperature Controller, ON/OFF & Summer/Winter Switch, pressure regulator, metering valve, pilot pressure regulator & pilot gas valve, flame rod, high limit switch, air flow switch, power transformer, ignition transformer and spark plug -- Electrical Control cabinet includes: main breaker disconnects, magnetic motor starters with adjustable overload protection for air makeup, motor fuse protection -- Motor Control: Control cabinet includes: main breaker disconnects, magnetic motor starters with adjustable overload protection for air makeup, motor fuse protection -- Enclosure Design: Framed, with 18 ga. metal walls and 1" insulation -- Note: Available in Horizontal and Vertical mount. Please inquire.

TWIN FLOW Air Make-Up Unit 14,000 CFM. Vertical mount with Remote Control Panel: -- CFM: 14,000 CFM @ 1.75" ESP, 10 HPTEFC motor -- BTU: 1.38 MBTUH -- Burner: MAXON burner -- Temperature Control: 80º F temperature rise in spray cycle -- -- Mounting: Vertical, outdoor/indoor mounted -- Fuel required: Natural gas, 0.3 PSI pressure -- Intake/Discharge: Vertical, screened, air intake with vertical discharge -- Filter Sections: V-Bank style with 1’’ cleanable air intake disposable type filters -- Gas Control: Control cabinet and pre-piped gas combustion system mounted on burner section to FM, Electronic Modulation -- Specifications includes: Digital Temperature Controller, ON/OFF & Summer/Winter Switch, pressure regulator, metering valve, pilot pressure regulator & pilot gas valve, flame rod, high limit switch, air flow switch, power transformer, ignition transformer and spark plug -- Electrical Control cabinet includes: main breaker disconnects, magnetic motor starters with adjustable overload protection for air makeup, motor fuse protection -- Enclosure Design: Framed, with 18 ga. metal walls and 1" insulation -- Note: Available in Horizontal and Vertical mount. Please inquire. -- Also available: Controls option: - Two stages for 14,000 or 7,000 CFM at extra cost of about $3,000.

4' x 10' Capacity End Load Adjustable Height Capacity More specifications and pictures to follow soon

--In Auctions; https://exfactoryauctions.com/Detail/DL-230113/event/A122024$1 - NO RESERVE -- TYLER French-Type Dovetail Machine Equipped with: (2) 14-1/2” x 17” Tables. (2) 2 HP Routing heads for mounting of drawer sides. (1) 2 HP Grooving head for drawer bottom dado, (2) 2-Spindle Vertical boring heads for drawer hardware. (2) Pneumatic hold-down clamps

40? deep X 87.5? wide capacity. The Maximum opening is 49.5? and the pods will extend 9.5? for a minimum opening of 40?. The press is rated to 100 PSI and has (1) pod short of 100% pod coverage. That being the center bags are staggered. There are spring loaded bed rollers to aid in loading and unloading. The top and bottom plates are dent free and no air leaks This fully functional machine has been fully cleaned and checked and is ready to work..

Tyler Kerfsaver XL Resaw 1-1/4" Blades 36" Diameter Bandwheels Includes: Feed system that can tilt to mill tapered siding

TYLER 2400 SLOT-WALL MACHINE: -- Specifications:Produces T-slot "slat-wall" for architectural/store fixtures. 4' x 8' (48" x 97") max. panel cap., 2' x 2' (24" x 24") min. panel cap., min. panel thickness = 0.5" max. panel thickness = 1.5"; The Tyler 2400 can machine up to (40) panels/Hr, depending on material density, thickness and the slot profile. -- Equipped with: (18) Router spindles all on 3" fixed centers, spindles are driven in groups of (3) with (6) 7.5 HP - 3,450 RPM motors, all router spindles rotate @ 15,400 RPM. -- Operation: Panels remain stationary on top, pneumatically clamped in place while the bottom mounted router bank traverses the full length of the panel with a high-speed return, variable feed speed control, router assembly traverses on ground & polished rails with chain drive. -- Panels are positioned along the 8' rear edge fence line, distance from the panel edge to the centerline of the 1st cut can be adjusted from 0.0" - 3" (1 router spindle pitch). -- Overhead hold-down assembly with (2) large air cylinders and (5) arms with spring loaded clamping pads hold the panel in place. Panels are loaded from the 8' front and exit to the side. -- Includes: Operator controls for the machine cycle and a "setup" mode of operation; machine cutting cycle is initiated by a 2-hand operator safety buttons located on the right front of machine. - Produces approx. (30 - 40) panels per hour. -- Available Options at Additional Cost:Router spindles on 4'- & 100-mm centers; 48" x 121" workpiece capacity increases left-to-right workpiece (length) capacity.60" x 97" workpiece capacity increases front-to-back workpiece (width) capacity & includes (1) additional multi-spindle router head.60" x 121" workpiece capacity increases front-to-back & left-to-right workpiece capacity & includes (1) additional multi-spindle router head.

TYLER 703 Power Pod Cold PressTyler Air Pod Press with a Platen dimension of 40″ Wide X 87-1/2" Long. -- The Maximum Daylight Opening is 49.5″, and the pods will extend 9.5″ for a minimum opening of 40″. -- The top and bottom plates are dent free. -- The press is rated to 100 PSI and has (1) pod short of 100% pod coverage (being that the center bags are staggered). -- There are spring loaded bed rollers to aid in loading and unloading. .This machine has been cleaned and checked and there are no air leaks.

Tyrone-Berry Drum Package

TYRONE-BERRY Carriage feed, model 230 good condition with 125 HP motor on Hydraulic system and drum section. Drum has 20" x 20" face and grooved for 3/4" cable.

Tyrone Berry 60hp model 220 carriage drive, includes drum package with cable, includes spare pumps