Equipment For Sale

UNIQUE 2753 Arch Shaper with Sanding HeadThe Unique Model 2753 Is A Single End Machine Designed For High Quality, High Production, Cabinet And Passage Door Arching Of Top Rails And Panels. Its Two Counter-Rotating Spindle Motors are Easily Programmed For Multiple Cuts With Hogging And Finishing Cutters To Eliminate Tear-Our And Extend Tool Life. A Sanding Station Provides A Multi-Pass Sanding Finish On Arched Door Panel Profiles. Unique “ArchPro"; Software Guarantees High-Speed Measuring And Fully Dynamic Programming Abilities.• Shaper Motor: (2) 10 HP Himmel Direct Drive , 440V - 39.2A, 3PH Motor• 5" Stack Height • Compressed Air Requirements: 90 PSI - 2 CFM• Dust Collection: (2) 5" Diameter 1200 CFM each (1) 4" Diameter 800 CFM each• Work Height: 3’6"• Machine Footprint: 113" Width X 78" DepthIncludes - Safety Mats, Dust Collection Manifold, and Owner's Manual

UNIQUE "318-3" Rail MachineThe UNIQUE "318-3" Rail Machine is designed to cut precise profiles in rails, ideal for higher volume or production applications. -- Climb cutting provides better than moulder quality cuts, capable of cutting up to 35 FPM. -- Equipped with: 10 HP HIMMEL Direct Drive Motor, 1-1/4" Spindle with 5-1/4" stack height for tooling with up to (3) cutters on the spindle. -- Max. Material width 8", max. material thickness 2", Z-axis spindle movement adjustable with a digital indicator. -- Complete with:In-feed fence with digital read out, dust collector hood with 4" outlet; emergency stop and cutter shields.

UNIQUE - 313, ...Automatic Cope & Dowel Door MachineMiters the end & drills for dowels of (2) cabinet door rails on each pass; automatic cycle for accurate & easy alignment of mitered corners.Equipped with: -- (2) 5 HP Dual motor set for shaping w/1-1/4" spindles; (2) 0.33 HP dowel alignment drills. -- Automatic cycle with: Dowel hole boring for accurate alignment of mitered door corners in (15) Sec/cycle. -- 1" Material thickness cap., 4" max. material width, 5" max. cutter diameter. Features: -- (2) Pneumatic clamps hold material during operation for safe machining of parts; adjustable stops for dowel drilling; air over oil rodless cylinder driven table. -- Staggered tables with angled fences allow: (2) 1" Thick parts to be machined simultaneously; digital position indicator. -- Dust Collection: (2) 5" Dust ports require approx. 1,000 CFM per spindle.

UNIQUE 313 Automatic Cope and Dowel Door MachineMiters the end and drills for dowels of (2) cabinet door rails on each pass, automatic cycle for accurate & easy alignment of mitered corners.Equipped with: -- (2) 5 HP Dual-motor set for shaping w/1-1/4" spindles; (2) 1/3 HP dowel alignment drills. -- Automatic cycle with dowel hole boring for accurate alignment of mitered door corners in (15) Seconds per cycle, -- 1" Material thickness capacity, 4" max. material width, 5" max. cutter diameter. Features: -- (2) Pneumatic clamps holds material during operation for safe machining of parts, Adjustable stops for dowel drilling, Air over oil rod-less cylinder driven table. -- Staggered tables with angled fences allow (2) 1" thick parts to be machined simultaneously; digital position indicator. -- Dust Collection: (2) 5" Dust ports require approx. 1,000 CFM per spindle.Includes - Standard Finger joint shaper heads to cut miters and drill bits for doweling.

UNIQUE 310 Automatic Cope Shaper; Copes multiple workpieces up to 6" wide x 24" long in only (1) pass, quickly and accurately. -- Equipped with: (2) 5 HP motors with magnetic starter; (2) 1-1/4" dia. counter-rotating cutterheads eliminate tear-out on detail edge of cope/tenon cuts. -- Pneumatic safety clamps hold work in place until sliding table is returned to its forward position.

UNIQUE 310-40 1-1/4" Double-Sided End Cope Shaper Specifications: Max. length 40", Max. width 6", Max. thickness 1". Table size 13” x 42-1/2” x 37-1/4” H, Table travel 14-1/2”. Spindle dia. 1-1/4". Equipped with: (2) 5 HP - 3,450 RPM TEFC Motors, Counter-rotating spindles. Pneumatic hold-downs, Foot pedal control. 39-1/4” L x 1/2” H Fence. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

UNIQUE 80 Face Frame Assembly. The UNIQUE Face Frame Assembly System simplifies the assembling process. -- This is to ensure flush alignment of frames regardless of thickness of material. -- Major face sanding is eliminated. -- 60° Laminated 5' x 12' assembly table, squaring bar. -- Over arm with 5 hold down clamps.NOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

UNIQUE 79 Face Frame Assembly Table. The UNIQUE Face Frame Assembly System simplifies the assembling process. -- This is to ensure flush alignment of frames reguardless of thickness of material. -- Major face sanding is eliminated. -- 60° Laminated 5' x 8' assembly table, squaring bar. -- Over arm with (5) hold down clamps.

UNIQUE 71 Pocket Hole Boring Machine -- The UNIQUE "71" is a Single Spindle Pocket Drill capable of producing screw holes with unlimited spacing. -- The heavy-duty industrial construction has proven to give years of service with minimal maintenance. -- Push button control. -- Brand New with Warranty!NOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

UNIQUE 73 Pocket Boring MachineThe UNIQUE "73" Drill Tub is a pocket drill capable of producing screw holes with unlimited spacing. -- Heavy-duty industrial construction has proven to give years of service with minimal maintenance. Push button control. -- Double spindle boring tub, 2 drills with counterbore.

UNIQUE 73 Pocket Boring MachineThe UNIQUE "73" Drill Tub is a pocket drill capable of producing screw holes with unlimited spacing. -- Heavy-duty industrial construction has proven to give years of service with minimal maintenance. Push button control. -- Double spindle boring tub, 2 drills with counterbore.NOT IN STOCK - PRICING SUBJECT TO CONFIRMATION.

UNIQUE 4522 Shape and Sand with DOUCET Return Conveyor(4) Stations (2 Floating shapers, 2 floating sanders), each with 5" stack capacity.Configured as follows:(2) Shaper Stations with: 10 HP Direct drive HIMMEL motors, 1-1/4" dia. arbors.(2) Sanding Stations with: 2 HP Direct drive BALDOR Motors, 1" dia. arbors tiltable up to 45 °.Sanding Stations are variable speed from 6,000 - 9,000 RPM and reversible.Shaper Stations are variable speed from 6,000 to 9,000 RPM and reversible.Specifications & Features:Variable speed conveyor speed from 0 - 35 FPM; 6"Heavy Duty conveyor and roller hold-down system.Features: Digital indicators for both horizontal & vertical adjustment on all spindles from the front.PLC Controlled "jump-cope"; machine is equipped with Windows/XP-based computer touch-screen & software. - Software stores feed rates, positions, cutter rotation, profile pictures, and RPM settings.Includes "DRO" Option: (Software and hardware upgrade from standard "Trueset" software - linear encoders on each station send real-time location of spindle back to the computer and give the operator the desired position; Machine will not start until all spindles are manually brought to the correct setting; a ...$ 10,950 value option).Includes Optional "Inset" automated size &squaring infeed fence ($ 16,850.00 option value).Max. material thickness - 2-1/2"; min. material width - 1-1/2" plus the depth of the cut.(2) 5" Dia. dust ports and (2) 4" dia. dust ports; Tooling not included.Complete with: DOUCET Feedback Return Conveyor ($ 10,000 option value).Floorspace required with DOUCET Return is 17-1/2' x 10'.

United Tool Grinder M-75-C-9 S/N 075380803

It is a 2 saw re-rip with one moveable saw and an adjustable fence. Capacities: Minimum length = 8” Maximum length = 192” Minimum width = 1 ½” Maximum width = 6” Minimum thickness = 7/8” Maximum thickness = 1”

Nailmate pallet nailer

Universal IN-LINE Nailer Good Condition Recently Removed From Service

#120 • Universal Inline Automatic 64" x 84" Pallet Nailer -- Specifications -- Year: 2021-2022. Pallet Capacity: 84" x 64". Number of Stringers: 4. Power Type: Electric. Voltage: 480. Control Type: Fully Automatic. Automatic Stacker: Yes. Air Bag Clamps on Guns: Yes Auto Oil for Guns: Yes. On-Board Sensor: Yes. Slot Sensor: Yes. Pallet Hold Down Option: Yes. Sawdust Blower: Yes Number of Nail Guns Included: 0. Current Production Capacity: 1000-1200 per 8hrs. -- Description -- Woodpecker saddles for nailers. Currently in production. No Reserve! -- Specialist -- Myron Nissley with any questions, 574-536-2481. -- Location -- Montgomery, IN

42" x 48" 2500 lb Electric Lift

250 Bag Baghouse (bags not included)

25' Auger 9" Auger with Motor and Drive