Equipment For Sale

2022 Volvo L70H Wheel Loader Only 1,700 Original Hours, DEF Engine, Long boom Loader, 3rd Function, Ride Control Reversing Fan, Back Up Camera, Electronic Joystick Controls, Load Rite Scales, JRB 416 Coupler, 3.5 Yard Bucket, Extended Warranty Purchased 5000 Hours or 3 Years, 20.5 z 25 Tires, Ready for Work Compare a New Price. Weight 31,107 lbs. Length 24.64ft in Width 8.08ft in Height 10.77ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

This 2006 Volvo truck is in great condition internally and externally. The truck has 1,429,462.4 miles on it. The truck has an automatic transmission. The passenger seat has been taken off. We are currently waiting for the title of the truck to come in. If interested in this truck call Mr. Gavin 601-394-7796 Mr. Tim 251-366-3237 Kameron 251-242-5493 The truck is located in State Line, Mississippi, 467 St Peter St

2004 Volvo Dump Truck with 14ft bed, Auto 6 speed trans, 75%rubber on rear, New tires on front. More pictures to come Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Volvo wheel loader bucket, 2 yard capacity, good condition

To Be Sold In A Lot Of 5 2000 A40D 19557 hours 1998 A35C 201561 hours Unknown A35 257316 Hours 1995 A35 157949 1998 A35C 165793 Can Provide serial numbers per request

2005 Volvo A25D Articulated Dump Truck with 8,620 hours. Inspection report available. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1999 Volvo A25 Swivel dump truck with new rebuilt motor. Located in Tazewell, VA Contact Zach for more information. 931-224-0699

2018 VOLVO VNL64T300, 364,400 miles, Volvo D13 Turbo Diesel, 455HP automated trans., Inter Axle lock, Diff lock, Steerable pusher axle, air ride, single frame, Heat/AC, GVWR:52350 LB 12350 LB Front axle, 40000lb Rear axle, Aluminum Brush Guard, Air ride seats, Radio, Power windows, Steering wheel controls, Power mirrors, Full aluminum rims, 255/70R22.5 Pusher axle tires, 11R22.5 Front and Drive axle tires, $45,000

Air Conditioner Anti-theft System Auto Shift Auxiliary Hydraulics - 3rd Valve Boom, GP Bucket Counterweight Coupler - Quick Coupler Type - Hydraulic Differential Lock Emissions Level Engine Enclosures Lift - Standard Lighting Mirrors Product Link Radio Regulatory Marking Ride Control Rig Saver ROPS - Enclosed Steering Type - Wheel Ultra Low Sulfur Diesel Fuel

Air Conditioner Auxiliary Hydraulics - 4th Valve Boom, GP Combined Hydraulics - One Way Counterweight Coupler - Quick Coupler Type - Hydraulic Differential Lock Differential Type - No Slip Emissions Level Engine Enclosures Grapple Lighting Mirrors Radio - AM FM Radio Regulatory Marking Regulatory Status ROPS - Enclosed Steering Type - Wheel Tier 1 Compliant Tier 2 Compliant Ultra Low Sulfur Diesel Fuel Vital Information Management System (VIMS)

1999 Volvo L50 Wheel Loader, 5800 Hours, 17.5 X 25 Tires, Bucket 2yd, Coupler, Clean/Nice

MLS Number 12496080 2019 Volvo L50H Wheel Loader 3575 hours Volvo D4J Diesel Rockland GPX 2 yard bucket Solid tires @ 70%

1996 Volvo A35C, 16,981 hrs., Volvo 6cyl. Turbo diesel, automatic trans., 6 wheel drive, front/rear diff locks, tailgate, EROPS, Heat/AC, 26.5R25 tires, new air and fuel filters, %59,500

VOORWOOD M 15A CNC Round End Tenoner & Mortiser for 45° Door --The "M15A" Miter Machine is designed to rapidly make mortise and tenon cuts at 0°, 45° Only, . Parts can be up to 1.5"; thick and up to 4"; wide, and of ANY length. --A primary application for this machine is for miter cabinet door frames. Parts can be quickly transferred from left to right. They are mortised on the left side of the machine and tenoned on the right. The machine can also mill the slots. --Specifications & Equipped with: -- The mortise station has (3) servo-controlled axes (X, Y, and Z) that are coordinated by the machine controller to achieve complex CNC motion. It is equipped with a collet-style router spindle for cutting. The tenon station uses the same X- and Y-servo-controlled axes as the mortise station and is configured for pneumatically actuated in-and-out movement along the Z-axis. The tenon station is equipped with a direct drive shaper spindle for cutting. -- -- Pneumatic clamping assemblies with non-marring urethane pads are mounted to the hold-down assembly to secure the parts during cutting and these can be adjusted to various locations over the cutting surface. -- -- M15 Miter Machine operator interface consists of a colored touch screen. For simplicity, the entire calibration, setup, and monitoring of the machine are accomplished using only four touchscreen displays. The program designs the depth and location of both the mortise and the tenon. When the design is complete, it is saved in a recipe format. Once this recipe is opened, the operation is as simple and boils down to feeding the substrate into the machine. -- -- The full-color touchscreen panel is located on the front of the machine to provide easy access for setting up or operating the machine. Clamping and shaping operations are controlled by operating lighted pushbutton switches.

VOORWOOD "A 515 GH" Arch Door Sander with Floating Head ARCH SANDER with: (4) 1.5 HP Motors for precision sanding; quality sanding using Disc sanding at continuous feed. Equipped with: -- (4) Floating Sanding Stations equipped with: 1.5 HP Precision balanced drive motors and quick change spindles. -- Infeed & outfeed (1st and last) spindles equipped with: Double collets and angular, horizontal & vertical adjustments with accurate and repeatable digital readouts. -- PLC Control with: Monitor at eye level height.Feedthrough Arch Machine capable of sanding arch profiles on cabinet door components, plus can do straight cuts.. .

2024 Wacker Nueson ST31 Track Skidsteer, Two Speed, Enclosed Cab Heat/AC, Counter Weights, Power Attach. Low Hours Clean Machine.

2023 Wacker Neuson SM100 Mini Skid, Tracked, 42 hours, Comes With Trencher, Bucket, And Pallet Forks, Like New Condition. $35,000.00 For Package.

WADKIN GD 220 6-Head Feed Through MoulderSpecifications: -- Working capacity: 230 mm W x 130mm H (9.06" W x 5.12" H) Timber admitted, 220 mm W x 120 mm H (8.66" W x 4.72" H) Finished timber. -- Head Sequence: Bottom 7-1/2 HP, Right 7-1/2 HP, Left 7-1/2 HP, Top 15 HP, Bottom 10 HP, & Universal 7-1/2 HP. -- Spindle dia. 40 mm (1.57"), Spindle speed 6,000 RPM. -- Variable feed speeds 6 - 22 MPM (20 - 72 FPM).Equipped with: -- Right, Left & Top heads with Mechanical digital readouts. -- 1/2 HP Motorized feed beam, 2.2 kW Feed motor, 3 HP Cardan drive, Reverse feed, 5-1/2" Dia. Hardened & Chromed steel feed rollers up to top head, 2" x 2" Polyurethane feed rollers after top head, All feed & pressure rollers move with rise & fall of feed beam. -- 2 M (78.74") L Infeed straightening table. -- Manual bed lubrication. -- Sound enclosure.

WADKIN "GD 220" 5-Head Molder8-5/8" X 4-3/4" cap. - Head sequence: Bottom 7.5 HP, right 7.5 HP, left 7.5 HP, top 10 HP, bottom 7.5 HP motor.Other Specifications: -- All spindles 40 mm dia. at 6,000 RPM, with vertical and horizontal adjustments; electric spindle braking; (2) digital position indicators with tool radius compensation fitted to the horizontal movement of the right side head and vertical movement of the top head. 0.5 HP Motorized feed beam with pneumatic feed hold-down wheels; -- Cardan drive variable feed speed 18 - 72 FPM, 3 HP feed drive, reverse feed, 5-1/2" dia. hardened and chromed steel feed rollers up to top head, polyurethane feed rollers 2" x 2" after top head; all feed and pressure rollers move with the rise and fall of the feed beam. -- Diameter of cutting circle: minimum 100 mm all heads; for planing, maximum 125 mm all heads; and, maximum of 195 mm all heads for moulding. -- Complete with: Manual bed lubrication, 2-meter (78") infeed straightening table, sound enclosure and owner's manual.Like New Condition - this Moulder has never been used, and is still sitting on factory shipping pallet.

This machine is no longer needed at the current facility. Ready to load. Wadkin NNV-C Profile Grinder 3-phase Specification VISAGE - With bilateral linear action providing profiling and straight knife grinding up to a max of 335 mm. Will shape and regrind moulder knives in the block and profile grind solid tipped heads. Suitable for HSS, Stellite and TCT. Max length of cutter profile 335 mm. Max dia of cutting circle 350 mm. Includes arbor, grinding wheel, stylus, etc. Also included Carriage locks; Washdown facility. - per seller: Arbor on the machine itself is 1 1/4" we have a spacer we use on grinding wheels if we need to adapt them to our size arbor. Yes there is a dresser on the machine.