Equipment For Sale

2013 Merlo P40. 17 Reach forklift with 308 hrs. Maximum lifting capacity of 8,800 pounds. It has a maximum lift height of 55' and a maximum reach of 41'. Load capacity at maximum lift height of 5,500 pounds and a load capacity at maximum forward reach of 1100 pounds. Operating Weight 22,928.1lb Length To Fork Face 19.02ft in Ground Clearance 1.58ft in Width Over Tires 7.88ft in Overall Height 8.24ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Merlo P32.6 Telehandler with 4,153 hours. Boom, side Shift, Boom Suspension, A/C. Weight 13,139.6lb Length 13.85ft in Width 6.57ft in Height 7.06ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MDI Whole Log Metal Detector Sensor with Thru Trough.

Fiberglass Section 36" Bottom x 10'

MDI Whole Log Metal Detecting Sensor 40" x 48" Opening.

MDI Whole Log Metal Sensor 48" x 40" with Control Box

Metal Detector Control Box Model VLE-450 S/N 214008

MDI TWA 2000 Whole Log Metal Detctor with 14' x 40" Belt through.

Whole Log Metal Detector with MDI Sensor 28" Belt Will Pass Up to 21" Diameter Logs If Sensor is Raised will Pass 26" Diameter Logs

Whole Log Metal Detector with MDI Sensor 36" Belt Will Pass up to 30" Diameter Logs

MDI Metal Detector CR-85 Sensor & Box

225 KVA 480 volt to 208Y/120

Lumber Breakdown, Dual Grading, Trim, Sort, and Stack System – 45’ (4) strand package deck w/ S-drive & H-78 chain, 6’ (4) arm breakdown hoist (hydraulic w/ HPU) w/ stick removal belt & stick stacker, dual grading stations as follows: (1) top (5) strand common shaft dual drive & (1) bottom w/ (5) strand decline table 20’ grading w/ operator control w/ 81X chain, both w/ operator control w/ 81X chain, Softac software & PLC VASKAWA57 VFD, Lucidyne label jet printer, MIC lumber trimmer w/ double paddle fence, MIC (28) bay bin sorter, (5) arm blade type lumber stacker & Sullivan Palatek air compressor (piston), All controls are in order, This system was running the first of December 2023, ref #171 – For More Details Call for Complete Component System you can run it now. Contact Jackie 931-698-3342

Lumber Breakdown, Dual Grading, Trim, Sort, and Stack System – 45’ (4) strand package deck w/ S-drive & H-78 chain, 6’ (4) arm breakdown hoist (hydraulic w/ HPU) w/ stick removal belt & stick stacker, dual grading stations as follows: (1) top (5) strand common shaft dual drive & (1) bottom w/ (5) strand decline table 20’ grading w/ operator control w/ 81X chain, both w/ operator control w/ 81X chain, Softac software & PLC VASKAWA57 VFD, Lucidyne label jet printer, MIC lumber trimmer w/ double paddle fence, MIC (28) bay bin sorter, (5) arm blade type lumber stacker & Sullivan Palatek air compressor (piston),Specifications: 386' long x 24' high, runs 6' - 16' L longer, thickness 1" - 4" thickness, width 6' wide packs, 3 1/2 - 22" wide packs, 3 1/2 - 22" wide, this system was running December 1, 2023, ref #171 – For More Details Call for Complete Component System

Mid Oregon Chop Saw

MIDWEST AUTOMATION GS 214 Top and Bottom Glue Spreader53" Cap., top & bottom opposed glue applicator rolls, max. 3" opening, 40" pass-line height, 7-3/4" dia. grooved rubber spreading rolls. -- Rolls fitted with Teflon end seals and water tight bearings, upper elevator opening by single hand wheel on left with dial indicator; dual hand wheel opening glue film thickness adjustment. -- Galvanized collection tank; 54 FPM feed speed, top & bottom direct drive, 1.5 HP direct drive motors. -- Complete with: (2) Protection safety guards at roller in- & outfeed with safety interlocks, complies with UL & CE safety standards.

Specification from owner 5 Foot Wide - Midwest Automation top and bottom high pressure laminating line capable of laminating up to 5’ x 12’ panels consisting of the following equipment: Powered infeed roller conveyor PC-160 panel cleaner with top and bottom nylon brushes and dust collection shrouds. GS-417 top and bottom glue spreader with 65” panel width capacity, glue rolls are in excellent condition, separate top and bottom direct drive motors, powered opening, glue pump system. PP-500 panel positioning station for panels up to 62”W x 148”L x 1.63”T. RP-3170 heated roller press with 67”W high temperature silicone covered top and bottom rolls. SL-510 scissor lift table, 5’ x 10’ roller platform and 6000 lb. capacity. Includes 2 new recoated glue rollers and manuals. All equipment is 575V, 3PH. May consider selling pieces separately.

Brand New, Never Used 5' x 10' 3 Screening Decks

Mighty Mite Swing Saw 9" x12" x 30' capacity Infeed outfeed conveyors Perkins Diesel Power Precision 58" Chipper 150HP Incline Out Feed Conveyor Trailer Mounted Total Portable Optional 2013 Kenworth W900 Loader Truck W/ Olympic 10K Self Load Knuckle Boom 250/300 KW Gen Set Mounted On Truck (Two Available)

Mighty Mite 1212E 60HP electric with hydraulics complete with 4 saws, setworks generator. $60,000