BioMass Equipment For Sale

Peterson 4800 Flail Debarker Wireless remote controlled Reman engine Runs and operates good

Remote control

2014 Peterson 4300B -6,000 frame hours -Current hours on engine and rebuild 100(C18) -New rods and mains -New turbos -New pumps -Valves -Infeed floor and chains -6 new knives -New fans -Wiring -Tires are 90% brakes work

2011 Peterson Pacific Horizontal Grinder Power Source: Diesel Engine Mfr: Cat Engine Model: C27 Horsepower: 1000 Has approximate 9050 hours

Portage & Main Outdoor Wood Stove W/ Wood Chip Feeder

2021 Powerscreen Chieftain 1400 -1900 hours -2 deck vibratory box -Up to 400 tph -54,895lbs whole system -Tier 4 engine (110H.P) -3 Conveyors Main,Tail(fine),Side(midsize/oversize) -Belts in good shape -Clean ready to work unit

2019 Powerscreen Warrior 1800 -735 hours -2 Deck -Belts good -UC is good -No leaks

Precision 58" dia, 6 knives, COMPLETELY REBUILT!! comes with warranty, BRAND NEW condition! ready for production

New Precision Tub Grinder Motors

2001 PRECISION HUSKY PROGRIND 1000 TUB GRINDER REDUCED 275 HP New Fixed Teeth New Auger Motors Good Tires Runs Well

1996 Precision Whole Tree Chipper 21" Capacity 700 HP Cummins KTA Twin Turbo Needs Clutch AC Heat Good Feed Rollers Disc Wheel Completely Rebuilt New Anvil New Wire Plate Husky 235 Loader 52" Rotobec Grapple PRICE REDUCED

Precision Husky 23 Chipper Needs engine Has Cummins KT19 650HP

The seller has confirmed that this 96" Precision chipper is in good working/running condition and is ready to load. This was not heavily run. This came out of a chip plant in WA. - Model 96.27 - Horizontal feed - Side discharge - 4-Knife whole log chipper - 8" thick chipper disc - Built in disc brake - Extended front shaft for hydraulic starter - Hydraulic starting motor - Side discharge pipe with motorized outlet adjustment - 27" maximum log diameter - Many spare parts and knives included - Average production rate: 125 tons per hour - No hydraulic pump - No motor - an 800HP one can be added for additional cost though - The photo's show the optional extended shaft and hydraulic starting motor which is a special feature.

Complete chip plant includes: - The infeed is 12’ above ground level. They were feeding it one log at a time with a shovel. - There is a single chain 12” wide leading to the debarker. - The debarker is a Salem 20” ring debarker with mcdiarmond controls. - From the debarker it goes through I think is a metal detector. It’s is enclosed, 8’ long with a belt conveyor. - 75’ of 3-strand chain that reduces to 2-strand chain for 35’ then goes to another 2-strand chain for 12’ then goes into the chipper. - The chipper is a Precision with 2- 400 hp high efficiency 3 phase motors. - From the chipper the chips drop onto a 42”x50’ inclined belt that leads to the 2 deck screen. The screen is 92”x20’ - The waste goes on a 9”x20’ incline belt and dropped into a truck. - The chips go out on a 3-strand 100’ conveyor (strands are 14” wide) to a radial stacker for loading trucks. The stacker belt is 42”x65’ - Chips can be redirected to blower unit system that will transport them to a rail siding to so they can be loaded into a rail area. It starts out with 75’ of 12” pipe running on the ground. Then it sweeps straight up to a height of about 24’ and goes 150’ to a siding across the county road. The chip loading facility is intact. - The hog is located back by where the logs are loaded onto the chain going to debarker. Here’s a list of the conveyors going back to the Kockums hog. It has a 24”x36” opening at the top. - Conveyors: 12”x100’, 12”x 25’, 12”x60’. All of these conveyors are 1 strand steel.

48" dia. 6 knife wheel with 3 blocked, bottom discharge, good condition

Precision 58" Chipper - Model 58-60-16 6 Knife 150 HP Motor

PREMIER TECH - 600: 4-Station Vertical Compression Baler Specially designed to compress: Wood Shaving; peat moss; fiber cellulose, etc. --Complete with: Automatic Bag Feeder & Automatic Plastic Bag Closing & Sealing (stapler type closing). -- Height of tubes: 96". -- Motor: 25 HP. -- Tube size: 10-1/2" x 16-1/2" To make finished bags of 11" x 17". -- Complete with holding bin: 69" x 78"; includes: Support legs & walls. -- Motorized screw-feeding conveyor between holding Bin and Press. -- Motorized finish bag exit Conveyor.The unit is a 1995 YMFG; the computer was upgraded in 2006 and the unit was rewired. 4-Station machine.Owner runs shavings & is acquiring a new machine. This machine is in operation at the time of this listing.Owner will load Baler on a truck.

PREMIER TECH EM600R BAGGING SYSTEM (4) Station Compression Bagging System -- (4) Station Compression Bagging System -- High Tubes of 116" -- Bag Size 11" x 17" x Up to 30" -- Template Plastic Bag Sealer -- Loaded on your TruckThis includes the Dust Collector, Tub Grinder,

PRESTO P3-AA ROUND PNEUMATIC AIRBAG LOAD LEVELERTurntable top with easy turning anti-friction bearings allows users to spin loads so they are always working from the near side without having to walk around the unit.Specifications: -- Automatic positions loads between 9-1/2" and 27-3/4" -- Small base allows workers to stand up close to the P3 at any position -- Stable design requires no floor lagging -- Build fork pockets for easy lagging, -- Load capacity 4,000 Lbs -- Raised height 27-3/4" -- Lowered height 9-1/2" -- Overall base 36" W x 36" L -- Turntable diameter 43-5/8" -- Shipping weight 450 Lbs