BioMass Equipment For Sale

JM-FF-ED-DT BAG FILL MACHJM-FF-ED-DTMild steel construction, dust-tight spoutJM Electronic digital gross weigh scale for free-flowing products with 880 Digital Programmable Controller, air-operated dust tight spout, recommended for use with dry, free-flowing products that do not require auto adjustments from the digital controller. 21", 25", or 31" circumference spout available. Dust Collection Port: 1-1/2" dust port (upper left corner LH side of scale) 100 CFM regulated by customer dust collection system - metered.HOPPER STANDHOPP & SUPT 37 CU' MS37 Cu' Surge Hopper and Scale Support system with Upper and Lower Level Sensors to control feederCON 510-LPCONV 510 Bag Closing Conveyor10' overall length, 1/2 HP motor, 12"-wide 3-ply neoprene smooth top belt, 110V variable speedmotor mounted internally, adjustable conveyor height 13.5" to 18.5" and adjustable back plate,electrical controls include on/off switch. Powder Coated Industrial Gray (RAL #7046)Dwg: CON 510-LPPACKRITE XROLHEAT SEALER W/ EXTRA SET OF COBAND SEALER - BAND SEALER - Model 6000 Bandrite Band Sealer is the result of innovative sealing technology and 60 years of packaging experience at Packrite. It has been and will be continually upgraded and enhanced. This machine is a workhorse! It is made for multi shift operations. Bandrite, R-L, 3/4 Seal, StSt, ~~ Adjust to height, stainless steel & pressure rollersincluded.CON 8INCCONV INCL 8'Incline Conveyor 8' long, fixed speed, specify 90' or 120' FPM, 24" wide rough top belt. Roll Over plates are included on all incline conveyors that have an inline bag closing conveyor. Mild steel construction coated with gray powder coating.ROLLER TABLE BGRAVITY ROLLER ACCUMULATION TAGravity conveyor 3'-6" long with 1.9 x 16 gauge rollers set high on 2" centers 30"EFF. 30" BF feeding to 18" radius adjustable top. "H" type support legs 36" to 42" height. Half moon table to stop bag from rolling.PALLET POSITIONP3-AA All Around Pallet PositionAll Around Pallet PositionerLift Capacity 400 lbs to 4,500 lbs - Base Size W / L 36-1/4" x 36-3/4"Lowered Height 9-1/2" - Raised Height 27-3/4"Turntable 43-5/8" diameter - Pressure relief valve StandardFork Pockets 6-3/8" W x 1-3/4" H on 29-3/8" Centers

MATH-EX Bag FlattenerSpecifications: -- Standard Bag Flattener conveyors are 12' in length with a 15° incline. -- The system has an opposed 6 foot conveyor with parallel linkage and adjustable spacing for various bag thicknesses. -- The standard unit has a 12" inlet and 42" discharge. -- The lower conveyor has a 1-1/2 HP motor and the top conveyor has a 1 HP motor both with a speed of 90 FPM. -- Both conveyors come with 24" wide Roughtop black beAlt.Custom length bag flatteners are available in 2' increments from 10 feet to 24'. Mild steel construction with industrial powder coat finish is standard, however all stainless steel, corrosive resistance packages and hazardous location components are available as option.There is a $250 crating fee that must be added to the price Standard Delivery 8 weeks

Purchased from MC3 Manufacturing in Kingsville, ON -- Received NEW April 27, 2023; used since purchase: 0 Hours. --230 V - 3/60. Controls: Incoming 110 V; outgoing: 230 V. -- Start/Stop/Variable Speed; Estop: Motor start switches & emergency stop pull cable systems installed around all conveyors. -- All electrical motors, cabling, and panels meet: Zone 22 explosion-proof classification. -- Slider bed belt Conveyor (D-Style). -- Pulley c/c length: 206". -- Horizontal length: 92". -- Conveyor incline: 21°. -- Conveyor elevation: 90" At load end; 163" discharge end. -- Side rails: Included; 12" height. -- Belt width: 18". -- Between frame width TBV Belt-type: 3-Ply "Poly CR74" white PVC; 2-3/4" cleats at 12" centers; full width between side walls with: 60 mm Height white TPU side walls. -- Belt speed (max): 66 FPM. -- 206"; L x 39"; W x 23"; H; weight: 9,000 Lbs.

1995 McCloskey 833 Trommel -9000 hours -Meter might be faulty -Engine runs strong -Needs -Drum chain -Feed conveyor drive chain -Batteries

2008 McCloskey 412 -2500 hours -New brushes -Fluids been flushed -New coat of paint -Swivel Conveyor -Smaller job trommel

1995 McCloskey 621 Trommel Screen -6634 Hours -Tight and dry -Belts are good -Hoses are good -1/2 inch screens Only was used for leaf and compost

2018 McCloskey S130 Triple Deck -2470 Hours -Triple Deck -Belts good -Dry unit

2017 McCloskey 628RE -3000 hours -Screens good -No major leaks -Tires and light good road worthy

2023 McCloskey R230 -200 hours -New staggered plate tap deck -3/4 bottom screens -Up to 900 tph LIKE NEW !!!!!!!!!!!!!

(2) McConnell 40-50 MM BTU Gas Burners available

Mclanahan Wash Plant -Plant consists of a feed hopper, approximately 100' feed conveyor, to a 6'x20' 2 deck simplicity screen -After the screen the material then is processed by the Mclanahan wash plant. -The Mclanahan wash plant consists of a sump and pump, the pump then feeds the S830A20X separator -After the separator a dewatering screen is the final process of the Mclanahan wash plant. Full wash plant ready to work please feel free to get in contact with us for further information!!!!!!!!!!!

MEC 12'x42' Triple Pass Drum Trunions Cyclone available

8' x 30' MEC triple pass drum dryer with biomass burner. Perfect for pellets, shavings, grindings, sawdust, and countless other projects. Excellent condition! We can provide any additional equipment to complete or upgrade your plant!

MEC 8'x30' Triple Pass Drum Dryer 12 MM BTU McConnell Gas Burner 8' Cyclone

MLS Number 13567192 Mercodor Industrial Shredder Just under 2 hours of use Shredder with base Outfeed conveyor with permanent magnet belt 2 x 20Hp 480 volt/60Hz Knives 20 mm 5 hooks Machine opening 1200 mmx 600mm Can process trim ends, sawdust and plastic Machine is still set so we may process wood or plastic for samples if required.

MERCADOR - 40 HP Dual Shaft Shredder -- (2) 20 HP Motors. -- Only (43) hours.

MIZAR- 16" SURPLUS Alligator Shear - IN STOCK -- Blade Length: 15,75 in (400 mm) -- Cutting Speed: 7 cuts/min. --Total Power: 7.5 kW / 10 HP -- Overall Length: 1.650 mm / 64.9" -- Overall Width: 820 mm / 32.2" --Overal Height: 1.600 mm / 63" --Overal Weight: 1.250 kG / 2,760 Lbs

MIZAR - 24" Blades: Surplus Alligator Shear - IN STOCK READY TO SHIP -- Blade Length: 24" (600 mm) -- Cutting Speed: (8 - 9) Cuts/Min. -- Motor: 7.5 kW. -- Width: 36"; length: 71"; Height: 59". -- Weight: 2,750 Lbs. -- Electrical Components: SIEMENS. -- 1-Year Warranty.

MOLLERS HSA Automatic Stretch Hooding SystemSpecifications: -- Max. pallet size: 48" x 48" x 120" -- Capacity: up to 120 units per hour (depending on load height and length) -- Main motor: 2 HPFeatures: -- Fully automatic -- Tubular film is automatically fed and stretched over the load -- Handles a variety of load heights automatically

MOLLERS HSA Automatic Stretch Hooding System with Corner Board ApplicatorSpecifications: -- Max. pallet size: 48" x 48" x 120" -- Capacity: up to 120 units per hour (depending on load height and length) -- Main motor: 5 HP -- Corner board system: -- Automates the process of placing 4 corner boards. -- Each corner board magazine can hold up to 30 corner boards. -- Carousel design, servo driven corner board applicator allows for precise positioning during corner board retrieval and for proper staging.Features: -- Fully automatic -- Tubular film is automatically fed and stretched over the load -- Handles a variety of load heights automaticallyApplications include: -- Pallets of smooth boxes or uneven containers that need to be secured on a pallet -- Cereal / grain based products -- Chemical / industrial -- Prepared / convenience foods -- Household goods -- Snack foods