BioMass Equipment For Sale

Cat 3412E 860hp Engine status report shows 43% average load factor, 3317 idle hours. 8899 hours on original engine. Completely serviced and runs properly. Morlift 500 loader with tight grapple, A/C cab all nicely fitted. Auxiliary air compressor Michigan model 40 knife grinder Extra knives Very sound, tidy chipper throughout. Call for complete condition report.

2014 Morbark 1200XL-WCL -7571 hours -CAT C27, 875 HP -Cab Loader Option -New Floor -Spare Rotor, Screens, Tips, and Parts Package -Turn Key Ready to Grind

2008 MORBARK 30/36 TREE CHIPPER 5.100 HOURS GOOD DRUM JOHN DEERE ENGINE 500 HP GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

Rebuilt Deere 600HP engine, 6 pocket 3/4" chip drum. Wireless Remote

1994 Morbark 1050 Tub Grinder -4780 original hours -Cummins engine (475 H.P) -Tight and dry -Loader -Tires and lights good -Belts good -Just serviced

400HP, 25" wide drum, original hours

1998 Morbark 22RXL Disc Chipper -Unkown hours -Cummins Recon engine(600hp) -Needs new inside hood but has replacement for it -Tires are good -No lights On Job Chipping now videos upon request!!!!!! Available as a package with two chip trailers 42x96 rear load CALL FOR PRICE!!!!!!

Morbark 30-36 Portable Chipper 350HP Cummins Approx 4000 Hrs self Feeding Grapple Up to 18" Dia Material

2009 Morbark 30/36 Tree Chipper -1045 Original hours -C13 440 HP -A/C blows cold -Clean tight chipper

1998 Morbark 1300 Tub Grinder -9000 hours meter doesnt work but has original ecm can read it -Loader -Few minor leaks -Mill in great shape -Augers are freshly hard faced -Belts in good shape -New injectors -Comes with an extra set of new hammers and tub rollers -A/c blows ice cold

2011 Morbark M20R Track Chipper, Cat 415HP with 5090 hours, Radio Remote, Infeed conveyor, Woods ready. H 11’5” W 8’6” L 22’9” 26,540 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Morbark Hurricane 18 with loader, Cat CA3116B 250hp T2 Diesel Engine with 1000 hours, Tandem Axle, Hydraulic Front Stabilizer, Large capacity 150 Loader, Dual Rear Stabilizers, Hydraulic swivel Discharge, Flow Control, Tail light guards. Weight: 16,530 lbs Length: 20’ 2” Width: 7’ 4” Height: 8’ 8” 2 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Morbark 1300B On Tracks -3400 hours -1050 hp -Service regulary -Belts are good -Mill and teeth in great shape MORE PICTURES COMING SOON

1998 Morbark 2400 Chipper, ONLY 1800 Original Hours, Perkins 185 HP Turbo Diesel Engine, Hydraulic Tongue Jack, Hydraulic Lift Assist Cylinder, Twin Disc SP 211 Clutch, Tires are at 50%, In Excellent Condition. Two Owner Machine, Ready for Work. Weight: 15,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Morbark Model MR20 Brush Chipper, Engine is a Caterpillar 325 HP with 9,700 Hours, Autofeed System,, Tandem Axle with Hydraulic Tongue Jack, UCC Lights, Electric Brakes Ready for Work. Length 26'8" Height 11' Width 8' Gross Weight 18,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

860HP CAT 3412. Hour meter shows 2100 hours. Unknown machine hours. All functions work as should.

2021 Morbark 1821 Brush Chipper, Gas, Hydraulic Winch, One Owner Trade In.

MULTITEK - TRC 460, ...Rim Crusher: ...Less than (300) Hours!Features & Specifications:• Tough MULTITEK® products; simple and strong. Truck Rim Crusher makes wheel salvage easier. • Powered by: Fuel-efficient 25 HP liquid-cooled diesel engine with operator instrument panel control.• The powerful MULTITEK built 6" (15.2 cm) diameter hydraulic cylinder features a Heavy-Duty aluminum piston for continuous duty cycle application.• Power-assisted hydraulic wheel lift arm means less work to load heavy truck wheels.• Powerful 70,000 Lbs (31,752 kG) of crushing force.• Simple: Minimal training and maintenance required.• Standard 2"; ball hitch.• Dimensions: 80" (203 cm) W x 171" (434 cm) L; weight: 3,400 Lbs (1,542 kG).• Engine: Liquid-cooled Diesel with electric start.• Cycle Time: (35) Seconds.

NAZZARENO OL.D. 201 M Briquette Press (Log Maker)Produces a 2.8" (70 mm) dia. briquette (endless production);Specifications: -- 265 - 330 Lbs/Hr (120 - 150 kG/Hr) capacity, 14.8 HP (11 kW) main motor. -- A horizontal feed screw provides a continuous and constant load for each press cycle.Features: -- Pistons (loading and compression), compression heads, extruders, and oversized piston clamping assemblies to ensure a high quality briquette and a long operating life of the machine. -- The OL.D 201 M system is a 2-part machine - the Press and the Mini Silo. The Mini Silo can be replaced with other storage systems. Silos of any size can be attached to this machine! Complete with: -- Mini silo, hydraulic control unit, cooler and PLC control.Includes: -- Step-down transformer.

Nice Newman G-280 tub grinder. Everything functional just needs cleaned.