sawmill Equipment For Sale

Cornell 30' Barnsweep Conveyor w/Electric Drv

Cornell Dbl End Trim S/N STBD-335-5-93

10' x 7' 5 Strand Transfer Deck No Idler Wheels

Cornell 50HP Material Blower

Per seller: This saw was used as more of a center splitter. It has been used to gang rip 2x6 into 2x3.

12' CLB Saw infeed Belt

Cornell Material Blower

Cosmec CM100 12" Dip Chain Gang Saw Parts Machine Only

Covel Grinder

CP MANUFACTURING - S100-6-LH-US, ...Screens -- (1) System of (2) Screens -- Very lght Use -- Ordered as part of a Single-Stream Sort System that was designed to run 10 Tons/Hr -- 1-Feed Conveyor -- Each: 14,500 Lbs -- Loaded onto your Truck

CP CD1000 CAN DENSIFIER -- 900 to 1,500 Lbs/Hr capacity -- Fully automatic solid-state Controller -- Density: 40 Lbs per cu. ft. allowing 140,000 Lbs in 50' railcars or 40,000 Lbs in 40' Trailers. -- 10 HP - 3/60/208/230/460 Volt Hydraulic Power Unit

CAN-PAK - CD-3000: Complete Can Densifier -- Motor: 25 HP.Dimensions• Height: 9’-2";.• Width: 3’-10";.• Length: 13’-5";.• Machine weight: 8,000 Lbs.• Conveyor weight: 1,000 Lbs.• Conveyor: 11’-5"; High x 20-1/2"; wide x 13’ long.Specifications• 25 HP Power unit.• 460 Volt, 3-phase wiring.• Solid-state programmable controller.• Thermostatically controlled hydraulic oil cooler.• 1 Cubic yard hopper.• 120-gallon hydraulic tank.• 20-1/2"; Wide infeed conveyor with: 3/4 HP Motor. Direct drive gear reducer. Magnetic head pulley. Steel reject chute.

CD600 CP Manufacturing CAN DENSIFIER --Successful recycling is efficient recycling. There’s simply no more efficient way to handle aluminum cans than to densify them. The CD600 separates and densifies 500 to 1000 lbs. of aluminum cans per hour into 18 lb. biscuits These uniformly sized biscuits stack and band easily without pallets into 2500 lb. bundles for easy handling. Densifying allows you to ship maximum weight loads- meaning you’ll never pay to ship air again. The CD600 is unusually quiet and remarkably compact. It’s entirely automatic, eliminating the need for constant attendance while automatically adjusting to accept whole or flattened cans.FEATURES: • Processes from 500 to 1000 lbs. per hour of aluminum cans • Automatically adjusts for whole or mixed cans to give the maximum pounds per hour throughput • Fully automatic cycle eliminates the need for constant attendance • All machine functions are operated by solid state, programmable controllers • Ideal densifier for indoor use due to low noise level, compact size and attractive design • Minimum number of moving parts—fully enclosed for maximum operational safety • Removable bale chamber liners • Rugged construction and innovative design • Biscuit eject guard

CRAM-A-LOT - HX-60: Closed Door Baler with Cart Dumper & Infeed ConveyorSpecifications: --The CRAM-A-LOT "HX-60 HH" & "HX" Series Balers are ideal for warehouses and designed for ease of installation, operation, and maintenance. -- CRAM-A-LOT® HH & HX Series Balers are: Built with extra Heavy-Duty construction; ideal for warehouses & recyclers who deal with large quantities of corrugated and paper products.Baler is designed for long hours of operation and can operate either manually or automatically with photocell control. Optional custom-engineered Feed Conveyors and Cart Dumper Systems efficiently control Baler feed rates for optimum performance in a complete Baling System.Standard Features include:ANSI Z245.5 Compliant: All Compactors meet or exceed ANSI Z245.5 safety standards.UL/CUL Listed Control Panels.UHMW Ram Shoes: Adjustable to assure straight tracking and readily replaceable, should the need arise.Oil Sight Gauge: Oil level at a glance.Oil Filter: Replaceable "spin-on" cartridge to keep your oil clean.Heavy-Duty Controls: NEMA 4-Rated pushbutton controls with "key lockable" start switch.Automatic single-cycle operation. -- Bale Size: 60" x 30" x 40". -- Bale Weight: Up to (OCC) 1,400 Lbs. --Throughput: (OCC) 2-1/2 Bales /Hr. -- Cylinder: 7".

CRAM-A-LOT - SCR-T2-34: 34-Yard Self-Contained CompactorsSpecifications -- Cylinder: (2) 4". -- Main motor: 10 HP. -- Feed opening: 41″ x 58″ (1,041 mm x 1,473 mm). -- Capacity: 34-Yard. -- Ram force: Up to 24 tons.

Cresswood EF24-50 Grinder No infeed conveyor 50 HP Motor

Cresswood Model EF 50-100A Horizontal Shredder 100 HP 12' Vibratory Conveyor (2) Feed Rollers Screw Auger Discharger Inclined Conveyor with 10" Magnetic Head Pulley Discharge Height 116" Crossbelt Magnet Soft Start Extra Set of Cutters 2 New Screens 1/2" Screens

Crosby 32 2 Saw Edger with Electric Motor

Crosby 32" 2 Saw Edger #3835S

5" x 17' Crosby Tailing Belt