Equipment For Sale

RYE Mdl 320 Type R28 Routing Machine

S&W Model 700 Sawmill 4500 hours 1600bf per day Capacity 26' long x 52" Heavy duty mill Believed to be a 1994

30 HP Bandmill

SAC - PRIMA K 630, ...Single Head Sander24" Width cap single head. -- Combination sanding head with: 4-3/4" Dia. grooved rubber contact roll & 2" wide polishing platen. -- 7.5 HP Motor; abrasive belt size 25" x 75" with air tensioning & electronic abrasive belt tracking. -- Dual feed speed 15 or 31 FPM; infeed & outfeed rubber-covered holddown rolls. -- 6-1/4" Motorized thickness adjustment by 0.5 HP motor with: LED Readout, and automatic part thickness adjustment; micro switch; 7" dust hood opening. -- Complete with: --: Emergency stop button, motor load meter, and selection of belts.

SAV S 53 S Single Sided Planer20" Width x 1/8" to 12" opening; 6.6 HP motor, 4-knife 4-3/4" dia. cutterhead rotates @ 5,000 RPM, max. cutting depth 5/16" -- (4) fixed feed speed settings 13 - 23 - 36 - 59 FPM. Equipped with: -- (1) Steel outfeed roller, (2) adjustable bed rollers, sectional infeed roller, sectional chip breaker, manual raise & lower w/mechanical digital readout; -- Table size 41" x 21". Complete with: -- Emergency stop, magnetic starter w/overload protection & 5-1/2" dia. dust hood.

SAC F 430 430 mm (16.93") Jointer Specifications: Max. depth of cut 8 mm (0.31"), Rabbeting cap. 1/3" x 16". Infeed table size 430 x 1,570 x 860 mm (16.93” x 61.81” x 33.86”) H. Outfeed table size 430 x 1,280 x 860 mm (16.93” x 50.39” x 33.86”) H. Cutterhead speed 5,000 RPM. Equipped with: 120 mm (4.72”) Dia. 4-Knife Nickel-Chromium Molybdenum Steel Cutterhead, with "TERSA" Knives. 3 kW (4HP) Motor, with Brake. 1,200 mm L x 160 mm H (47.24” L x 6.30” H) Aluminum fence, with 0° - 45° Tilt. Swing-away guard. Knife setting gage. Complete with: Spare Knife Set (Needs sharpening).

2 - S A Woods 4 Head Moulders with automatic feeders on both and many upgrades. Original owner and comes with all tooling and extra parts. 1 Moulder is manufactured in 1939 with original blue prints and parts books. The other Moulder is a 1960s model. Both machines were pulled out of service 2 years ago. Both moulder are in working order. There are 20 + heads available and 3 pallets of parts go with the machines. They have been kept indoors. Make an offer! Call 800-459-2148 for more info.

Complete Operation For Sale: - S. A. Woods Moulder 4 x 8. - Includes all switch gear, large blower and piping, many heads, knives, sharpening equipment. - Cap 150 BF 2 x 6 per minute. - Drop channel siding and tongue and groove set ups. - 2 Top heads, 2 Side heads, 1 Bottom head. - 550 volt, 3 phase. Call 800-459-2148 for more info.

SAC TS120 Heavy Duty Single Spindle ShaperSpecifications: -- Precision ground cast iron table: 51" x 32 -- Max tool diameter: 250 mm / 9.84" -- Capacity under nut: 6" -- Main motor: 9 HP -- (5) Spindle speeds: 3000 / 4500 / 6000 / 8000/10,000 RPMEquipped with: -- Magnetic controls with overload protection -- Self braking motor -- Guard assembly with -- Fence assembly with micro adjust on outfeed fence -- Miter slot in table -- Interchangeable spindles -- Reverse rotation switch -- Manual raise and lower of spindle by handwheel -- Spindle lock for tool changes -- Mechanical readout for spindle height in handwheel -- Electronic indicator for RPM -- Includes tool box with accessories and wrenches, manualsNote: Machine has a 1600 CFM dust requirement.

SAFETY SPEED MFG 60HA Hot Air Edgebander; Safety Speed Cut now offers a Hot Air Edgebander that is small in price yet big in ability.The NEW "60HA" features: -- Electronic variable speed control -- Digital Electronic temperature control -- Adjustable Heat nozzle that saves energy. -- Electromagnetic end-cutters; no compressed air needed -- Accutrim edge trim system uses industrial duty trim routers to ensure a quality finish. -- Dust collection outlet to keep the part machine and floors clean -- Automatic conveyor for consistent feed rate.....and yes it is "American Made"!

SAFETY SPEED 72GP EDGEBANDER -- Digital P.I.D. Temperature control Glue Pot that reduces overheating and burning of the glue. -- Standby temperature mode for small runs. -- Short 10 - 15 Min heat up time -- Digital Electronic temperature control. -- Adjustable Heat nozzle that saves energy. -- Electromagnetic guillotine end-trim means no compressed air needed. -- Accutrim edge trim system uses industrial duty trim routers to ensure a quality finish. -- Dust collection outlet to keep the part machine and floors clean. -- Automatic conveyor for consistent feed rate -- American Made.

SAFETY SPEED 3760 Wide Belt Sander;Heavy welded construction minimizes vibration and ensures consistency in sanding.Specifications: -- Single-head 37" wide Combination Sanding Head. -- Rubberized 4-1/4" dia. contact drum with a 2-1/2" finishing platen. -- Hand wheel to manually change the thickness setting form 0" - 7-1/4". -- 15 HP 3-Phase motor main drive motor. -- 37" x 60" Abrasive Sanding belts. -- Pneumatic belt tensioning and infrared electric eye tracking. -- 1-1/2" Dia. infeed & outfeed rubber covered holddown rollers. -- Infeed safety stop bar, emergency stop button and 6" dia. dust outlet. -- Available Options: Hour meter and 15 HP, 3-Phase motor, and digital readout for conveyor bed opening. -- Dimensions: 50-1/2" L x 47" W x 63" H (Crated Dimensions - 55-1/2" L x 52" W x 68" H).

SAFETY SPEED MODEL 4375 WIDE BELT SANDERHeavy welded construction to minimize vibration and ensure consistent sanding. -- Single 43" Wide combination sanding head. -- Rubberized 5-1/4" contact drum with a 2-1/2" wide finishing platen. -- Hand wheel to manually change the thickness setting form 0" - 7-1/4". -- DC Conveyor drive with variable feed rate of 0 - 18 FPM. -- 43" x 75" Abrasive belts. -- Pneumatic belt tensioning and infrared electric eye tracking. -- 1-1/2" Dia. infeed & outfeed rubber covered holddown rollers. -- Infeed safety stop bar, emergency stop button and 6" dia. dust outlet. -- Avaialble Options: Motorized conveyor setting; Hour meter; Digital height setting; and 20 or 30 HP 3-Phase motor. -- 53" L x 56" W x 70" H (Crated Dimensions - 58" L x 61" W x 75" H).

EZ6 Sld St Starter

Sajo Milling Machine All Electric. Made in Sweden Call 800-459-2148 for more info.

36" SALEM carriage with NO setworks but with 'Cam' box. ADD YOUR OWN SETWORKS. 60' rail included; 4 sets of wheels-good condition; 3 headblocks spaced 72" & 60" on centers; cant pushers; topdog; frame 16' OAL. Headblocks-good condition. Price $12,000.00

42" Salem LP Carriage

42" Salem LP

Salem 6' x 48" Top Arbor Edger S/N 88-133499 W/20' Outfeed

8" x 54" SALEM, bottom arbor, combination gang-edger. Center section only.  Split machine. New solid feed rolls-chromed and knurled. New top press rolls-smooth-split 33" and 15" wide. (4) new 5" bore cylinders for press rolls.  3 7/16", double keyed, saw mandrel.   Hydraulic feed.  Saw shifting device outside of frame but no saws or collars but with shifting arms.  3 sets rubber cushions on press rolls.  All sprockets are new with hydraulic drive.  No infeed or outfeed. 125 HP motor included. No plumbing or electric wiring.  New bearings on feed rolls.  20HP hydraulic power unit. Machine mounted on 6" beam. Price $35,000.00