Equipment For Sale

Timesavers Single Head Sander Combination Head Model 2311-45-6 Includes transformer

TIMESAVERS 2321-23-21 Planer Sander 2 Heads2-Head, 36" width cap.Specifications: -- 1st Head: 6" Dia. Helical head with (6) spirals of 4-sided carbide inserts, 25 HP motor. -- 2nd Head: Combination head with 5-1/2" dia. contact roll and 2-1/2" wide finishing platen, 20 HP motor, sanding head with 37" x 75" Abrasive belt with "POSI-TRAK" electronic tracking. -- Dial indicators for height adjustments, -- Conveyor belt feed with variable feed speed 20 - 45 FPM, automatic conveyor belt tracking. -- Anti-kick back fingers on infeed; planer head with sectional infeed shoe and double holddown rolls on outfeed, double infeed and outfeed rubber covered holddown rolls on sanding head. -- Motorized part thickness adjustment 0" - 5" with mechanical digital readout; -- Minimum part length 15"; Pass line height 33"-38". Complete with: -- Controls mounted on belt loading side, air activated caliper disc brakes on all heads, load meters for each head and 14" infeed loading area. -- Dust extraction 3,500 CFM, Compressed air usage: 3 CFM @ 90 PSI, -- Total load amps at 230 Volts - 145 Amps.

TiMESAVERS 237-KA IC Planer Sander 2-HEADs (2) Heads Planer Sander Combination, 37" width capacity.Head Configuration: -- 1st Head: 7" Dia. Helical "Quiet Cut" planer head with (6) spirals of 4-sided carbide inserts with 15ø rake angle, head turns @ 3,200 RPM, head adjustment with dial indicator readout, 30 HP motor. -- 2nd Head: Combination Sanding head with 6" dia. contact roll (60 to 65 duro.) and 2-1/2" wide finishing platen, 25 HP motor; sanding head with 37" x 75" abrasive belt with "POSI-TRAK" electronic tracking.Feed System: -- Variable feed speed 15 - 45 FPM, automatic conveyor belt tracking, 3-ply rough top conveyor belt. -- Anti-kickback fingers on infeed, air loaded sectional shoe with dial indicator adjustment and double grooved pinch roll on infeed of knife head. -- Infeed & outfeed pinch rolls on sanding head, air activated caliper disc brakes on all heads. -- Motorized part thickness adjustment 0" - 6" with digital readout.Complete with: -- Controls mounted on belt loading side, main motor fuse protection on both heads, load meters for each head, "over thick" shut-off system and 24" infeed conveyor extension.

Timesaver 2331-45-006 (3) Head Wide Belt Sander;52" Width cap , Drum, Drum, Combination HeadHead configuration 1st Head: 30 HP motor, 8" dia. rubber covered serrated drum with 65 / 70 duro.2nd Head: 25 HP motor, 8"dia rubber covered serrated drum with 65 / 70 duro.3rd Head: 25 HP motor, segmented combination, drum/platen 5-1/2" dia. drum also with 65 / 70 duro drum and a 2-1/2" platen;Specification -- 3rd head has abrasive belt air jet blow off. -- Variable feed 15 / 45 FPM; -- Double in-feed and out-feed rubber covered hold-down rolls.Equipped with & Features -- Star Delta starters on all heads; disc brakes on main motors. -- In-feed stop bar, motorized bed table lift -- PLC controller with HMI interface, electronic abrasive belt tracking. -- This is not a constant pass line sanderNote from Seller: 1800 Hours! We are the 2nd owner of the unit. Well maintained by original owner and purchased by us in 2022. At that time the machine was inspected an by original owner and purchased by us in 2022. At that time the setup and all adjustments done by TS tech

TIMESAVERS 2331-04-334 DUAL HEAD DENIBBING SANDER2-Head, 42" width capacity Sanding / Denibbing system. -- (2) 5" Wide platens featuring a "dual" action head with a high speed orbital movement and combined back & forth oscillation to remove abrasive belt crossgrain scratches; platens designed with a quick change system for abrasive material. -- (1) Nylon abrasive impregnated (150 grit) Cleaning / De-Nibbing brush, 10" dia., drive unit for brush rotation, brush wear adjustment via jack screws. -- Vacuum holddown conveyor system with variable feed speed 5 - 15 FPM. -- Double infeed and outfeed holddown pinch rollers. -- Power raisng and lowering of the conveyor bed with AUTO-SET feature, 0" to 6" part thickness capacity. (4) DUFF-NORTON acme screw jacks under conveyor bed, 36" infeed conveyor area.

TIMESAVERS - 352 HDA, ...Abrasive Planer/Sander2-Head, 51" width cap. Heavy Duty Sander. -- 1st Head: Smooth steel contact roll, 11-1/2" dia., 75 HP motor. -- 2nd Head: Spiral Grooved hard rubber contact roll (11-1/2" dia.) , 75 HP motor; 52" x 103" abrasive belts (6,300 & 4,300 SFPM) with POSI-TRAK electronic tracking. Equipped with: -- Heavy-Duty solid rubber (no vacuum holddown) feed belt for Heavy-Duty operation. -- Motorized part thickness adjustment, 0" - 6" opening. -- 38" - 32" Conveyor height passline with MITUTOYO LED readout, conveyor belt feed. -- 5 HP Variable feed speed from 20 - 60 FPM, smooth rubber conveyor belt. -- Infeed & outfeed spring loaded holddown shoes, infeed emergency stop bar, anti-kickback fingers on infeed. -- Disc brakes on sanding head motors, 18" infeed load area, and motor load meters on sanding heads.

Timesavers Series 1300 (3) Head 43" Wide Belt Sander43" width cap Drum, Drum, Combination headHead Configuration1st Head: 8" dia. contact roll 2nd Head: 8" dia. contact roll 3rh Head: Combination Head 5 1/2" dia. Contact Roll , 2 1/2" width platen on combination headSpecifications -- Dial indicators on drums/platens -- 75" abrasive belt length -- Disc brakes on main motor -- 20-45 FPM feed speed A/CEquipped with & Features -- Auto set-up device -- Motorized lift -- 0-5" opening (33-38" passline) -- 14" infeed loading area -- Quick release outboard support -- Through-beam abrasive belt tracking -- 15" minimum part length -- Emergency stops at infeed and out-feed location

These two sanders are being sold as a line. They are ready for immediate removal, with riggers on site over the first week of August, 2024. - Sander 1: Timesavers Sander Model 352-6KAICBT, bottom frame unit. 3 Head, 50-HP Motors. - Sander 2: Timesavers Sander 352-6KAICBT, s/n 27080 top frame unit. 3 Head, 50-HP Motors

22" blade Manual operated 460v 3phase 15 HP motor

2024 TMC CANCELA Forestry Mulcher, DCR Style Rotor, Knife Teeth, Hydraulic Door, 2800#, Please Call For More Info.

60' Toledo 100 Ton Truck Scale with Digital Reader. S/N 1000796-1RP Out and Ready to Load

Position 1 005023 Panel Feeding and Loading TOMASSINI-RAPID/C 100-130 DOP Position 2 005024 Roller Conveyors TOMASSINI-TA CINGHIE-SPEC Position 3 005029 Roller Conveyors TOMASSINI-TA CINGHIE-SPEC Position 5 005030 Roller Conveyors TOMASSINI-TA 78 130 S-SPEC Position 7 005031 Brushing Machines MECCANICA VIESSE-SP 1300 Position 8 005032 Panel Stacking and Offloading TOMASSINI-RAPID/S 100-130 DOP

Belfab Dust System Control Starter Panel Control Panel Disconnect Control Panel Transformer Main Blower Stop/Start with running pilot light VFD with air flow control Environmental Rating: NEMA 12 Timebard Type: 22 PIN Cleaner Sensor Type: Delta P+ 2-20 MA Fan Outlet Silencer Fan Stand Timer Pulse Control Pulse Relays 460V/3PH No fan or motor supplied...can be obtaned at an additional price.

Pneumafil – New Style 10’ ·· Pneumafil – Old Style 12’, 10’, 8’ ·· Torrit – 8’, 10’, 12’ ·· Carter Day – 10’ or can be cut to less ·· Airlanco – 10’ ·· Mac – 10’ MCF Style ·· Call for Availability

TORIT-DONALDSON ADMC AD8 DRYFLO Cartridge Dust Collector. A Mist collector designed for long-lasting high collection efficiency capture of coolant and machining oil mists in metalworking applications. Even smaller amounts of dust can be filtered in the dirty air stream. -- DRYFLO is a proprietary cartridge which outperforms electrostatic precipitators and mist collectors utilizing standard HVAC envelope and cassette filters. Filter unit features a unique air-side filter retention system allowing for quick filter changes with minimal worker contact with collected oil. -- Also feature three-stage Filtration via a.) prefilter, b.) wrap allowing, c.) the filter cartridge to drain and coalesce smaller coolant mist droplets in to larger droplets. Plus optional fourth stage HEPA filters available for applications where smoke exists or additional efficiency of discharge air is required. -- Overall data: Capable of 17,600 CFM; (8) Filter Cartridges, 1,760 sq. ft. of filter area, -- Complete with: Ground mounted fan powered by a 40 HP motor, belt-driven. Fan includes a variable volume inlet. In prior application clean air was not retruned to building. -- Blower currently setup for approx. 15,000 CFM with 40 HP, Baldor Super-E, 324T frame, 1.780 RPM motor. -- Enclosure dimensions: 133" long, 68" deep, 160" high. Filter weight is 7,300 lbs.

TORIT - 460-IRD-20, Dust CollectorAn easy and economical solution for a wide range of wood dust collection applications. Down flow air pattern allows airflow and gravity to move filtered dust to collection receptacles for longer bag filter life and reduced pressure drop.Specifications: -- 20 HP Direct drive; floor mounted blower. -- Fan inlet 17". -- 7,000 CFM. -- Set of filter bags. -- Steel elbow from fan to collector. Motor Starter NOT included.

TORIT - PCO2-4, Baghouse Dust Collector (Cartridge)Specifications: -- Top-mounted 7.5 HP blower with 1,750 CFM. -- (4) Cartridge filters with controller for high and low set pressure to activate the pulse jet cleaning. -- Dust collected single, Heavy-Duty barrel. -- Inlet size 14". -- Return air damper/muffler. -- Includes: Set of New cartridge filters.(Additional Ducting available!)

DONALDSON TORIT - ECB 1, Environmental Control Module Rated at 4,500 CFM @ 3.3:1 Air-to-Cloth ratio with a 5 HP blower/motor. -- Cloth area 1,356 sq./ft. from (6) cartridge filters (used) with louvered doors. -- Unit includes: Reverse pulse jet cleaning; motor starter; pulse control timer board; pressure gauge. -- (6) Round cartridge filters, fire retardant. -- Motor starter and disconnect. -- Great for removing fine airborne dust from multiple sources. Recirculates clean air, eliminating the need for costly make-up air and requires no ductwork. -- Modular, compact design permits proper sizing for each application. -- Installation, operation, and maintenance manuals included.

DONALDSON TORIT - ECB 1, Environmental Control Module Rated at 4,500 CFM @ 3.3:1 Air-to-Cloth ratio with a 5 HP blower/motor. -- Cloth area 1,356 Sq./ft. from (6) cartridge filters (used) with louvered doors. -- Unit includes: Reverse pulse jet cleaning, motor starter, pulse control timer board, and pressure gauge. -- (6) Round Cartridge Filters, fire retardant. -- Motor starter and disconnect. -- Great for removing fine airborne dust from multiple sources. Recirculates clean air, eliminating the need for costly make-up air and requires no ductwork. -- Modular, compact design permits proper sizing for each application.

Reconditioned Torit 156RF10 baghouse