sawmill Equipment For Sale
.gif)
3591 Results Found
.jpg?width=220&height=170&mode=crop)
$ 12,500
Baker/Augusta Mills Cant sizer Recent rebuild by Baker 3.5"-5.5" cants New bearings New belts 6" belt Lineshaft setup Speed up wheel Work ready PRICE REDUCED
$ 12,500
Baker single head resaw, Model; BBR-O, Serial#; 04-3371, has tilting infeed belt w/ digital display, electric drive, includes spare parts/ blades, excellent condition
$ 17,500
.jpg?width=300&height=200&mode=pad)
Baker 12" resaw w/ cross over chains and return. Machine has four sets, all manual, line shaft ready. Located in PA. #C916
Call for Price
$ 2,500
2 strand transfer deck, 28" wide x 14' long, #80 roller chain, no drive, good condition
$ 28,000
.jpg?width=300&height=200&mode=pad)
Baker 4hd Bandsaw with complete run around. Located in WI. #C952
Call for Price
2010 Baker 2hd Resaw with return. #00901 More Photos Coming Soon!
Baker Dominator 3650E Sawmill Edmiston Edger Morbark Chipper with diesel engine All decks and rollers
$ 57,500
BAKER C 4-HEAD Horizontal Resaw w/Powered Return6" Wide x 12" high cap. Resaw; standard spring blade tensioning system;Specifications: -- 13'-2" x 1-1/4" x 0.035 blade provides thin kerf savings; quick & easy blade height adjustments. -- Wheels: 28" Dia. CNC machined, dynamically balanced, all-steel band wheels, (4) bolt flange; rough top feed belt combines with opposing side feed rolls and air pressure hold over rolls; idler hold downs . -- (4) 20 HP Total Enclosed Fan Cooled Motors; Thin-kerf technology and the Baker Low Profile Flat Guide System generates up to 60-70% less sawdust and up to 25% more boards, easily out-producing a gang rip. Complete with: -- Hydraulic variable feed speed from 20 to 120 FPM (6 to 36 MPM) with a tank, flow control and remote feed shutoff; powered side feed rolls. Includes: -- Powered conveyor, powered return conveyor, NEMA electrical panel with the starters, motor overload protection, remote start/stop stations.6" x 6" Square dust collection with a 90° adapter chute to a 4" dia. outlet (can be rotated in (4) directions); 600 CFM required for each drop.
Call for Price
Baker Products’ Self-Dumping Steel Hoppers can be used to collect almost anything. It has a reinforced base and continuous weld. When the hopper is full, you can easily pick it up with almost any forklift and dump it simply by pulling a lever. It has a lock, so the load will not dump by mistake. The Baker Self-Dumping Steel Hopper is a convenience every company should have. A. 2 yd (1,828 mm) 603 lbs. (274 kg) B. 2 yds (1,828 mm) 805 lbs. (365 kg) C. 3 yds (2,743 mm) 971 lbs. (440 kg) A. 44” (111.8 cm) 59” (150 cm) 69½” (176.5 cm) B. 45½” (115.6 cm) 57½” (146 cm) 64½” (163.8 cm) C. 55” (139.7 cm) 58” (147.3 cm) 71” (180.3 cm) Forklift Opening: 2½” (6.4 cm) high by 48½” (123.2 cm) wide
Call for Price
Baker Side Transfer Belt - Hydraulic drive, 5 1/2" x 40" side shift belt, 24" x 5', 21" belt.
$ 7,500
$ 65,000
1992 Baker 6 Head Resaw Six-Head "C" Saw 1 needs a spindle and wheel replacement. Approximately 8,320 Hours Serial Number 92-379 6 Motors (30) HP (37) Amps Mechanical Drive
Call for Price
Baker Furnace Dry Kiln 110volt 3 phase Excellent condition
Call for Price
Brand new...never used...still on the original pallet.
Call for Price
Baker PAQ Resaw Good Working Condition
Call for Price
Baker Furnace Dry Kiln 110volt 3 phase Excellent condition
Call for Price
Model 3650E with Baker (3) Strand Infeed Deck Excellent condition Hydraulic over electric general factory networks. Hooked up to power and ready to be demonstrated.
Call for Price
Dry Kilns (cream), Conventional Heating System, 600,000 BTU Propane, single phase, 120V control voltage, 3 phase 208V motor voltage, open volume: 672 cubic feet, max operating temperature: 500F, owners manual included, excellent condition, 2 units available