Equipment For Sale

BOLT ON CUTTING EDGE CONNECTING LINES NOT INCLUDED CRAIG 48" TILTING GRADING BUCKET FITS CAT 315D,316,318 MACHINES ALONG WITH M318s WITH CAT PIN GRABBERS PINS NOT INCLUDED SOLD AS IS

BOLT ON CUTTING EDGE CONNECTING LINES NOT INCLUDED CRAIG 48" TILT BUCKET FITS CAT 315D, 316, 318 MACHINES ALONG WITH M318s WITH CAT PIN GRABBERS PINS NOT INCLUDED SOLD AS IS

- ADD $4000 TO SALE PRICE IF INTERFACE BRACKET IS NEEDED. 10'5" WIDTH WHEN ANGLED 12' BLADE WIDTH 42" BLADE HEIGHT FOR GRADER OR SMALL TO MEDIUM WHEEL LOADER

CRAIG QUICK KEY COUPLER SYSTEM, ONLY PICKS UP CRAIG QUICK KEY BUCKETS FITS ON 938M

3.0 CYD GP BUCKET CRAIG QUICK KEY COUPLER SYSTEM INTENDED FOR CAT938 SIZE LOADER

CRAIG FORKS CRAIG MANUFACTURING QUICKKEY INTERFACE DESIGN TINES ARE 48” LONG AND THE WIDTH OF THE CARRIAGE IS 72.5’’

- ADD $4000 TO SALE PRICE IF INTERFACE BRACKET IS NEEDED. 120M 10' 1073 SERIES ONE WAY PLOW FOR GRADER OR SMALL TO MEDIUM WHEEL LOADER

45 DEGREE ANGLE TO LEFT AND RIGHT BOCE INCLUDED. BUCKET PINS INCLUDED CRAIG 48IN TILT BUCKET FITS CAT 316-318

45 DEGREE TILT LEFT AND RIGHT DIRECTIONS BOCE INCLUDED. BUCKET PINS INCLUDED CONNECTING LINES INCLUDED

CRAM-A-LOT - HX-60: Closed Door Baler with Cart Dumper & Infeed ConveyorSpecifications: --The CRAM-A-LOT "HX-60 HH" & "HX" Series Balers are ideal for warehouses and designed for ease of installation, operation, and maintenance. -- CRAM-A-LOT® HH & HX Series Balers are: Built with extra Heavy-Duty construction; ideal for warehouses & recyclers who deal with large quantities of corrugated and paper products.Baler is designed for long hours of operation and can operate either manually or automatically with photocell control. Optional custom-engineered Feed Conveyors and Cart Dumper Systems efficiently control Baler feed rates for optimum performance in a complete Baling System.Standard Features include:ANSI Z245.5 Compliant: All Compactors meet or exceed ANSI Z245.5 safety standards.UL/CUL Listed Control Panels.UHMW Ram Shoes: Adjustable to assure straight tracking and readily replaceable, should the need arise.Oil Sight Gauge: Oil level at a glance.Oil Filter: Replaceable "spin-on" cartridge to keep your oil clean.Heavy-Duty Controls: NEMA 4-Rated pushbutton controls with "key lockable" start switch.Automatic single-cycle operation. -- Bale Size: 60" x 30" x 40". -- Bale Weight: Up to (OCC) 1,400 Lbs. --Throughput: (OCC) 2-1/2 Bales /Hr. -- Cylinder: 7".

CRAM-A-LOT - SCR-T2-34: (3) 34-Yard Self-Contained CompactorsNOTE: Lot of (3) Specifications: -- Cylinder: (2) 4". -- Main motor: 10 HP. -- Feed opening: 41″ x 58″ (1,041 mm x 1,473 mm). -- Capacity: 34-Yard. -- Ram force: Up to 24 tons.

2016 CRD Metal Works Rapido Loco 20, 100 hours on a Deutz factory re-man, 2nd Owner, S/N # 5VGFD1823GL001745

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6k ROCKWELL/CRESCENT 5-Head Single Head Tenoner Equipped with: Manually-operated sliding table. (1) Top & (1) Bottom Tenon Heads, Each with 2 HP Motor, (1) Top & (1) Bottom Cope Heads, Each with 1 HP Motor, & (1) 7" Cutoff head with 1 HP Motor.

CRESCENT P 24 PLANER -- 24" x 8" Cap., 10 HP direct drive motor. -- 4-Knife cutterhead, approx. 11" min. un butted stock length. -- 24" x 36" (Approx.) Cast iron table, manual raise-and-lower. -- 1 HP Separate feed motor, variable speed from 20 - 50 FPM; (2) 3-5/8" dia. powered bed rollers, (1) 3-5/8" dia. upper outfeed roll, and sectional infeed roll with (12) 2" sections. -- Features: Sectional chipbreaker with (12) 2" sections.

60-100 Cresswood Grinder with Hopper, Conveyor and Control Panel. New Gear Box and Bearings put in within the last year. #00849

Cresswood Model EF 50-100A Horizontal Shredder 100 HP 12' Vibratory Conveyor (2) Feed Rollers Screw Auger Discharger Inclined Conveyor with 10" Magnetic Head Pulley Discharge Height 116" Crossbelt Magnet Soft Start Extra Set of Cutters 2 New Screens 1/2" Screens

Cresswood EF24-50 Grinder No infeed conveyor 50 HP Motor

?Cresswood EF-60 Grinder 100 HP 60” Wide Feed Opening Includes 60”W Vibrating Conveyor (shaker table)

Cresswood Grinder Model HF6860-125LR CS GBP 125 HP Main Motor 460v/3ph Auger motor 2 HP Approx 5,500 hours Still in operation

Cresswood Wood Fired Furnace W/ Stacker, HPU, 2 Augers & Controls.