Equipment For Sale

Edmiston 4 Head Block Circular Sawmill Running daily Won't be available until April

Complete sawmill that is used daily. Infeed deck to debarker Morbark debarker with bark conveyor Infeed deck to mill Edmiston Sawmill: 4 HB Carriage, operator cab, drop conveyor for slabs Edmiston Edger Greenchain with rooftop Precision 48" Chipper with infeed All electrical, controls and hydraulics included

Complete Edmiston Sawmill Set Up, Including: Frick Edger, Log Decks w/ Stop & Load, (2) Deutz Power Units and MORE, $20,000

The mill is a 56” Edmisten’s that was capable of cutting longer lengths. Up to 34’. The carriage is 20’ long with 5 headblocks.

Edmiston Hydraulic Circle Mill 2 Head Block Carriage , Log Infeed Deck with SNL, , Slab Belt, Log Turner. Available as a Package. Still in Place. Vertical Edger is gone But have others of needed.

7 strands Unscrambler (1 without chain); 81X chain with flights on 30" centers; 7' tall x 7' deep x 15' wide; 5 HP drive. NO pocket so you can create your own.

Edmiston Type #2 vertical edger w/ (2) moveable saws w/ 50 HP motor (ref #154) Call Logan 304-641-6640 Call for pictures

Edmiston 2 Saw Edger HYD set w/Split Saw & Tailing Belt, includes 40 HP electric motor & substructure

3 strand green chain, 9'6" wide x 40' long, C-55 rooftop chain, good working condition

4" x 30" wide capacity, 2 movable blades, includes BRAND NEW ARBOR, very good condition

Edmiston 48” (4) HB circular sawmill, tong dog, includes chain type log turner, 30 HP hydraulics for carriage & turner, mill cuts up to 24’, includes husk frame w/ top saw, 15’ slab dump conveyor, Tyrone 150 HP shot gun carriage drive (only 4 years old!) w/ Z-Set setworks or can use standard Edmiston setworks, Note: Seller's new mill will need to be onsite before taking this out. Seller will remove. (ref #181) Call Amy for more information (928) 723-9449

Complete EDMISTON mill. Mill ran in March 2024. Includes: 3 strand log deck with top/loader; chain log turner; 4 headblock mill with track / frame / cab and control panel; chipper slab belt; dead rolls; 48" Precision chipper, blow pipe, and electrical (needs work before running); All electrical panels; spare saw blades. MUST BE REMOVED BY END OF AUGUST. Price includes all components $19,900.00

EDMISTON board edger. Includes: infeed;50 HP electric drive; starter; NO OUTFEED. Price $7,900.

Edmiston (4) head block carriage Model 36 w/ track & bumpers w/ Tyrone Berry SMA 225 hydraulic carriage drive & power unit, includes (2) saw hydraulic set vertical edger w/ saws, Silvatech setworks & saw cab - No husk frame... great to run with a band mill or we can find you a husk frame. (Price is loaded on buyer’s truck) (Ref #151) Call Amy Cross for more information. 928-723-9449

EIDAL Model 125 Dual Shaft, Slow Speed High Torque Shredder; 125 HP drive motor; 54"x44 " cutting chamber, cutting disc width approximately 2.5" thick. -- The rotor shafts are directly coupled to the 125HP motor through a heavy duty gearbox, 415 RPM rotor speed. -- Includes: Stand and Hopper. --Power Coupler Buna Spider insert failed and will need replaced.

EKSTROM CARLSON - Model EE, ...Straight Line Rip SawSpecifications: -- 30 HP Saw arbor motor. -- Max. thickness 3-1/4"; with 16"; dia. saw blade (no blade). -- 5 HP Feed Motor with feed rates infinitely variable to 280 FPM. -- (3) Lower infeed rollers are chain driven and are adjustable from 0° - 5°. -- Elongated pressure bar housing assures the proper guidance across the entire table length.Equipped with & Features: -- Spring-loaded rollers with 1 in. yield. -- Dual position and lubrication system; (2) outfeed rollers. -- Please note: Chain appears to be in very good condition.

EKSTROM CARLSON - Model EE, ...Straight Line Rip SawSpecifications: -- 30 HP Saw arbor motor. -- Max. thickness 4-1/2"; with 16"; dia. saw blade (no blade). -- 5 HP Feed Motor with feed rates infinitely variable to 250 FPM. -- (3) Lower infeed rollers are chain driven and are adjustable from 0° - 5°. -- Elongated pressure bar housing assures the proper guidance across the entire table length.Equipped with & Features: -- Spring-loaded rollers with 1 in. yield. -- Dual position and lubrication system; (2) outfeed rollers. -- Please note: Chain appears to be in very good condition. -- 3 extra blades

Single Line Rip Saw 110V 3 Phase

EKSTROM / CARLSON - 18, ...Pump Sander Pump Sander with: (2) 1" Dia. horizontal spindle; 2 HP - 1,200 RPM enclosed motor; mounted on heavy cast iron pedestal. -- Complete with: Push button magnetic controls & starter; 4" dust collection port.

good condition 3 phase/480 volt