Equipment For Sale

INTOREX HB-65 Automatic Dowel Milling Machine. For round dowels, table legs, broom handles, agricultural tool handles (concentric), umbrellas, stair rails, etc.Specifications: -- Automatic machine for rounding square stock with a cutter head that has (3) tools and finished diameters between 15 and 65 mm (3/32" to 2-1/2"). Unlimited working length. -- The head drive is 8.5 KW (10 HP). -- Working advance speed adjustable between 8 and 30 meters/Min. (26.25 to 98.5 FPM.) by means of a potentiometer. -- The machine has (4) draw-in rollers and (4) draw-out rollers to guarantee the uniform advance of the bar and good finish quality. -- INTOREX is designed and quality-built in Spain. -- Dimensions: 1500 mm (59.1" long x 1200 (47.3") wide x 1400 ( 55.2") high. Approx weight 850 Kg (1870 Lbs).

IPS - AT-872-50: Horizontal Open-End BalerSpecifications: • Auto-Tie Model.• Motor: 50 HP • Main Cylinder: 8";. • Hopper Opening: 46";x 60";.• Bale Size: 43"; x 48"; x (variable).• Main Ram Face Pressure: 74 PSI.• System Pressure: 3,000 PSI.• Total Compression Force: 150,800 Lbs.

IPS - AT-874-100, ...Auto-Tie Horizontal BalerSpecifications: -- Main Cylinder: 8"; Bore -- Bale size: 43" x 43" x variable -- Main motor: 100 HP -- Production capacity: up to 11 TPH (OCC) -- Bale tension cylinder: 6" -- Bale weight OCC: Up to 1,580 Lbs -- Conditioned news: Up to 1,775 Lbs -- Cycle time: 15 Sec -- Oil Reservoir Capacity: (400) gallons -- System Pressure: 3,000 PSI -- Platen Force: 150,700 lbs. -- Ram Face Pressure: 83 PSIEquipped with: -- Programmable PLC controls -- 0 - 15 Sec adjustable time delay -- Precompression lid

IPS - AT-752-20, ...Horizontal Auto-Tie BalerReconditioned Baler ready to handle your recycling needs! Specifications: -- Main cylinder: 7″ -- Tension cylinder: 6″ -- Bale size: 43″ x 43″ x Variable -- Charge box opening: 41″ x 50″ -- Total force: 115,400 Lbs -- Motor: 20 HP -- System pressure: 3,000 PSI -- Ram Face pressure: 63 PSI -- Oil reservoir: 125 Gallons

IPS - AT-752-50, ...Horizontal Auto-Tie BalerSpecifications: -- Charge box opening: 41" x 50" -- Main cylinder bore: 7" -- System pressure: 3,000 PSI -- Total force: 115,400 Lbs -- Ram face pressure: 63 PSI -- Tension cylinder bore: 6" -- Main motor: 50 HP -- Bale size: 43 x 43" x Variable length -- Bale weight: Up to 1,525 Lbs -- Bale volume: 66 Cu/Ft -- Cycle time: 20 SecFeatures: -- Hopper access door with safety interlock -- Oil Cooler

IPS - CD-751, ...Closed Door Horizontal BalerSpecifications: -- Bale size: 72" x 42" x 42" -- Main cylinder: 7" Bore -- Door cylinder: 4" Bore -- Main motor: 30 HP -- Charge hopper height: 90" -- Hopper opening: 40" x 50" -- Bale weight: Up to 1,700 Lbs -- Total force:115,400 Lbs -- Ram face pressure: 65 PSIFeatures: -- AR400 Alloy steel shear blade -- Steel floor with replaceable bearing strips -- 24 Volt control circuits -- Welded Frame, heavy reinforced channel & plate

Ireland Circular Sawmill #6 right hand set. Uses 60 HP engine. Cap 24' x 3'. 4 Head Blocks, 16' carriage, 52" blade. Steel track on wood stringers. All steel husk and wood carriage. 4 - 10 roller sections. Good condition and recently repainted. Can saw up to 12000 bf per day in cants. Improved power receeder. Flat belt pulley attached. Dismantled and ready to load. No power. Call 800-459-2148 for more info.

2007 IROCK RDS-15 Closed Circuit Crushing Plant -8377 hours -CAT Powered with onboard generator -2 deck -5x14 screen -Capable of Crushing up to 300 TPH -This unit is still on the job and used weekly

1984 IRON MULE 4510 SINGLE BUNK FORWARDER 3 CYL FORD STANDARD TRANSMISSION LEVER CONTROLS

1987 IRON MULE 5510 SINGLE BUNK FORWARDER 4 CYL FORD STANDARD SHIFT LEVER CONTROLS

1987 IRON MULE 5000 4 CYL FORD STANDARD TRANSMISSION LEVER CONTROLS BYPASS BUCKET ROTATOR

Ironwood Chop Saw

14” blade 5 HP 1” Arbor 23” x 25” table

Ironwood BR23 Boring Machine 230V/3PH

Ironwood S135 MRK Wide Belt Sander Manufacturer specs: 52” Triple head wide belt sander. Head # 1 is a helical planer cutterhead - 150 mm diameter with 30 x 12 x 1,5 mm carbide inserts - Height adjustable with dial indicator - Forty (40) horse power motor - Poly-v belt drive Head #2 is a rubber contact roller - 250 mm diameter 85 shore profiled rubber contact roller - Height adjustable contact roller with dial indicator for grit compensation - Twenty (20) horse power motor - Poly-v belt drive - Cutting speed of 20 mps (65 fps) - Cutting direction against feed Head #3 is a combination head - 140 mm diameter 65 shore profiled rubber contact roller - Height adjustable contact roller with dial indicator for grit compensation - Height adjustable sanding pad - Twenty (20) horse power motor - Poly-v belt drive - Air jet belt cleaning - Cutting speed of 12 mps (40 fps) - Cutting direction against feed

IRONWOOD P500 508 mm (20") Surface Planer, with Spiral Insert CutterheadSpecifications: -- 20" (508 mm) max. Width cap., 11.8" (300 mm) max. thickness cap., 0.393 (10 mm) min. thickness cap., 0.325 (8 mm) max. cut depth, 8.6 (220 mm) min material length (un-butted). -- 7.5 HP Main motor, 3.8" (98 mm) dia. cutter-head with 4.0' (102 mm) cutting circle @ 4,800 RPM; Spiral cutter-head with 75, 2-sided Carbide cutter inserts.Equipped with: -- Digital Position Controller for Up/Down of the Table. -- Variable speed by Frequency Inverter from 19 to 39 FPM / 1 HP feed motor. -- 0.25 HP Motorized support table, 29.4 (748 mm) long x 22.1" (562 mm) wide bed; the table is supported by (4) oversized columns with height positioning via keypad entry within the digital controller. -- Automatic power off when the top safety hood is opened. -- Both the infeed chip-breaker and the outfeed pressure rollers incorporate spring-pressured adjustments to ensure positive contact on the workpiece as it is passed through the planer. -- Two 3"; adjustable bed rollers for planing of rough or finished lumber, as well as glued panels. Complete with & more: -- Magnetic starter, Adjustable bed rollers, (1) 6" dia. Dust outlets. Requires 800 CFM; Shipping weight 1,800 Lbs. Features: -- The IRONWOOD P500 Series of 20"; thickness planers provide operators with solid thickness planning machinery that offers a powerful cutting performance. -- This machine features an enhanced heavy-duty cast iron table that is heat-treated and precision ground to assure the greatest rigidity and stability during intense cutting operations. The Ironwood Planers offers enhanced engineering designs and superior build construction for long-lasting and trouble-free performance.

IRONWOOD SLR 305 Straight Line Rip Saw Specifications: -- Width capacity of 18" and glue line tolerance up to 8'. -- Variable auto-lubrication system providing consistent lubrication to the chain track and automatically adjusting to the chain feed speed -- Minimum Material Length÷ 203 mm (8";). -- Material Thickness, Minimum- Maximum: 6.35 mm (0.25";) to 85 mm (3.35") -- Distance between Blade and Column 457 mm (18"). -- (8) Hold-down Rollers. -- Work Table Height 800 mm (31.5";). -- Saw Arbor Motor 15 HP. -- Saw Arbor Speed 4,500 RPM. -- Saw Blade Diameter 200-300 mm (8“ - 12“). -- Saw Arbor Diameter 25.4 mm (1";). -- Feed Speed 56 - 131 FPM. -- Feed Motor 2 HP.Equipped with & Features: -- Laser device to ensure straight line ripping entire length of the material. -- Maximum safety protection available with multiple rows of extended anti-kickback fingers and a side protection guard. Equipped with & Features -- (8) Accurately aligned pressure rollers extend from the cast iron machining head to provide absolute butting tolerances, low maintenance, and superior safety -- Solid steel cylindrical positioning rod and quick cam, cast iron fence provide accurate set-up, fast movement, and dust-free operations. -- Table Area (W x L) 950 mm (37";) x 1,450 mm (57";). -- Net Weight 2090 Lbs. -- Dust channel outlet (saw guard) 102 mm.

IRONWOOD DSP-2500 25" Double Sided Planer25" X 8" Double sided planer -- Max Working Width 25" -- Max Working Thickness 8" -- Min Working Thickness 6 /16" -- Min Length of Cut 12½" -- Upper Cutterhead Motor 25 hp -- Lower Cutterhead Motor 20 hp -- Feeding Cutterhead Motor 5 hp -- Table Rise/Fall Motor 1/2 hp -- Variable Feed Speed 26-78 fpm (8-24 m/min) -- Cutterhead Speed 5,000 rpm Cutterhead Diameter 5" -- Cutter Knives per Head 96 -- Max Stock Removal ½" total / ¼" per head Table adjustment -- Digital Electrical 460v (3 phase) 88 amps @ 460V -- Dust Port Diameter 2 ports, 6" each ; Dust Extraction Requirements 1,600 cfm @ 4,500 feet/min -- Machine Dimensions (W x L x H) 105" x 45" x 68" -- Gross Weight 7000 lbs

3 arm tilt hoist, arms made for 48" packs, electric drive, includes 3 strand 11'x 27'6" infeed deck w/ 81x chain very good condition

drop trimmer, 9 blades, up to 18' long capacity, air cylinders on heads, electric powered, price does not include going through shop