Equipment For Sale

For pre-glued PVC, veneer, & melamine laminate coil stock; 0.4 - 1.2 mm edge thickness; up to 35 mm panel thickness cap., automatic coil feed. -- Equipped with: Electronically controlled temperature setting for hot air blower; 3,000 Watts for up to 650° F temperature; (1) Min heat up time. -- Guillotine type front & rear end trim (with fast speed, flying knife); top & bottom flush trims with single motor drive to cutterheads. -- Overhead belt type feeder; 16 FPM feed speed. -- Mounted on machine base with panel support table.

VITAP LINEA 42 Line Boring SystemSpecifications: -- (2) Drill heads of (21) spindles ea., drills from bottom up, ea. support with 2 HP motor and (21) spindle boring block w/panel support mounted on top; -- Drills panels from 100 - 3,000 mm in length, and 100 - 950 mm in width. Complete with: -- Digital readouts for boring blocks, 2,000 mm bar scale fence with (5) adjustable flip stops. -- (2) Moveable overhead pneumatic holddown cylinders, foot pedal for clamping & boring cycle.

VITAP - RC 92, ...Semi-Automatic Top & Bottom Edge Trimmer: New, Never Used!Specifications -- For straight & curved edge banded panels. -- Max. edge thickness: 3 mm (0.12"). -- Panel thickness: 10 - 60 mm (0.39" - 2.36"). -- Table size: 27" x 31".Equipped with: -- (2) 0.55 kW (0.7 HP) - 12,000 RPM Spindle motors. -- Large dia. guide bearings to ensure precise trimming of edges.NOTE: Sold "As Is" without Warranty!

VITAP - ALFA 27: Construction Boring Machine27-Spindle boring head on 32 mm centers; drills vertically from bottom-up and head rotates to horizontal position for edge boring; head rotation is pneumatic with switch control. -- 2-3/4" Max. drilling depth; 2-1/2 HP - 2,800 RPM motor; pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size; max. workpiece width 31-1/2". -- Equipped with: Left & right-side fences for construction boring; (3) pneumatic holddown clamps; 118" line boring fence with: (4) Flip stops; pneumatic foot pedal control.

VITAP ALFA - 27: Construction/Line Borer27-Spindle boring head on 32 mm centers; drills vertically from bottom-up and head rotates to horizontal position for edge boring; head rotation is pneumatic with switch control. -- 2-3/4" Max. drilling depth; 2-1/2 HP - 2,800 RPM motor; pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size; max. workpiece width 31-1/2". -- Equipped with: Left- & right-side fences for construction boring; (2) pneumatic holddown clamps; 118" line boring fence w/flip stops; pneumatic foot pedal control; magnetic starter; overload protection.

Vitek Stroke sander Approx 8 foot capacity

Works well Taken out of service and stored

Vollmer FS73F Grinder, ready to be moved!

Vollmer Finimat Circle Saw Sharpener 120V 3 Phase

VALPATO LBK-150-ST 1 Feed Through Profile SanderTECHNICAL FEATURES: An added small needle type drum sander can be fitted with drum sanding aggregates of 25, ­30, ­35,­40, ­45 ­50 mm diameters which can be used for tighter curves and smaller radius sanding requirements. Storage compartments (2 in total) are located on each machine extremities, these are easily accessible and can be used for sanding belts and various tooling storage. Sanding belt motor power: 3 Kw Abrasive head motor power: 1.5 Kw Oscillation motor power: 0.38 Kw Feed motor power: 0.75 Kw Motor power for electrical adjustment of sanding group: 0.19 Kw Machine voltage: 480/3/60 Full Load Amps @ 480V: 15A Compressed air: Not required Dust collection requirement one (1) only 6" (150mm) port: 950 CFM Sanding belt speed: 14 Mt/sec Variable speed of the belt: from 5 to 25 m/min Sanding belt dimensions: 150 x 2640 mm Height of working table: 930 mm Dimensions of front working table: 1980 x 250 mm Machine dimensions: 2500 x 900 x 1600 mm Net weight: 1000 KMAIN FEATURES: User friendly PLC touch screen control panel is accessible from 360° by the operator, the control panel is centrally located on the infeed end of the machine. Factory installed variable feed drive (VFD), enables machine to run from 5 M/Min to 25M/min (+/­ 80 ft/Min). The entire sanding plenum rise and fall is motorized, it can be adjusted vertically in height to utilise the full height/width of the sanding belt. An oiling unit ensure long life of sanding plenum rise and fall master cylinder.

#201 • Volvo L70C Wheel Loader Serial #: L70CV14857. Model: L70C. Meter Reads: 24,120 hrs. Engine: Volvo Diesel. Fuel: Diesel. Tire Size: 20.5R25. 3rd Valve: no. Attachment: none. ROPS: Closed. Center to Center of Pins: 39 1/2" x 24". Lift Capacity: NA. Air Conditioner: no. Heat: no. Features and Notes: Glass is missing in cab, power quick attach has small leak when using, runs and operates.

This 2006 Volvo truck is in great condition internally and externally. The truck has 1,429,462.4 miles on it. The truck has an automatic transmission. The passenger seat has been taken off. We are currently waiting for the title of the truck to come in. If interested in this truck call Mr. Gavin 601-394-7796 Mr. Tim 251-366-3237 Kameron 251-242-5493 The truck is located in State Line, Mississippi, 467 St Peter St

2007 Volvo DHD D12 464 HP engine 10 speed Full locking 46k rears 4:44 ratio T ride suspension 452k miles Nice truck PICTURES COMING SOON

2013 Volvo L70G Wheel Loader with Forks S/N VCE0L70GL08614024 18491 Hrs.

MLS Number 12700853 2017 Volvo DD120B Smooth Drum Roller Compactor 700 hours

2019 Volvo ECR88D Excavator with 2500 hours, Quick coupler, Thumb, Blade, New Tracks, Radio, A/C and Heat. Weight 6,012 lb Height To Top Of Cab 8.91ft in Overall width 7' 7? ft in Overall length 20' 11? ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Volvo L-90C wheel loader, 20,567 hrs., includes log clamp attachment, has quick-attach, working condition

2018 Volvo L110H -4,172 Hours -Original paint -3rd Valve -Quick Coupler -Boom Suspension -Engine Block Heater -Rear View Camera -23.5R25 Tires -118” 4.3-yd GP Bucket

2018 Volvo ECR145EL -2,995 hours -A/C and Heat -Hydraulic Thumb -X1 Auxiliary -Hydraulics Plumbed for Hydraulic Quick Coupler -Push Blade -Engine Block Heater -36” Bucket w/ new teeth -15'1" Boom -8'2" Arm -20" Shoes w/ Bolt-on Rubber Pads