BioMass Equipment For Sale

https://www.timberwolfequip.com/pages/conveyors Starting at $4,495.95, Timberwolf manufactures conveyors ranging in length from 12' to 32'. All Timberwolf conveyors come standard with a hydraulic lift cylinder for simple height adjustments and tapered rollers to reduce belt tracking corrections.

Announcing two brand new lightweight, fixed tooth brush cutter mowing attachments from Torrent Mulchers - the EX28RPM & EX30RPM. Designed to handle anything from mowing grass to whole tree removal, these powerful lightweight mulchers will attach to almost any carrier. EX28 RPM TECHNICAL SPECIFICATIONS Operating weight - (Standard) 450 lb/200 Kg Cutting width - 28 inches Rotational speed - 3200 RPM (maximum) Excavator power requirement - 25Hp or 18.5 Kw (minimum) Excavator weight range - 3 to 5 tonne Cutter type - fixed spherical Cutter quantity - 28 Drive type - direct Power transmission type - hydraulic fluid power Hydraulic motor type - fixed axial piston Maximum hydraulic system pressure - 5000 psi/345 bar (maximum continuous) Hydraulic oil flow requirement - 13 usgpm/50 lpm (minimum)

Announcing two brand new lightweight, fixed tooth brush cutter mowing attachments from Torrent Mulchers - the EX28RPM & EX30RPM. Designed to handle anything from mowing grass to whole tree removal, these powerful lightweight mulchers will attach to almost any carrier. EX30 RPM TECHNICAL SPECIFICATIONS Operating weight - (Standard) 700 lb/313 Kg Cutting width - 30 inches Rotational speed - 3200 RPM (maximum) Excavator power requirement - 30 Hp or 22 Kw (minimum) Excavator weight range - 6 to 12 tonne Cutter type - fixed spherical or fixed beaver Cutter quantity - 18 Drive type - direct Power transmission type - hydraulic fluid power Hydraulic motor type - fixed axial piston Maximum hydraulic system pressure - 5000 psi/345 bar (maximum continuous) Hydraulic oil flow requirement - 18 usgpm/68 lpm (minimum)

2006 Trelan 23 -No blow by and doesn't use oil -New hood jack -New cylinder -10 sets of new blades -Extra set of belts -Disk pockets are in good shape

1988 Trelan Model 18 Whole Tree Chipper Equipped with Detroit 518 Diesel Engine, Engine Hours Unknown, New Drive Chain and New Belt, New Tire, No Separator Ready for the Woods... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

UMP BP500A Briquette Press New System - Ready to ship!

UMP - BP 450 A: 450 kG/Hr Briquette PressSpecifications: -- Cap. 450 kG/Hr (992 Lbs). -- Max. pressure: 1,700 kG/cbm (24,175 PSI). -- Max. chip moisture content: 15%. -- Max. chip size: 15 mm (0.59"). -- Wood shaving to briquette ratio: 10 to 1 (using mahogany). -- Briquette configuration: Rectangular. -- Briquette length: 40 - 105 mm (1.57" - 4.13"); Briquette width 150 mm (5.91"); Briquette height: 60 mm (2.36"). -- Briquette heat energy: 4,200 kCal/kG (7,558 BTU/Lbs). -- Hopper size: 31"; x 36"; x 36"; with: 1-Side sloping so cutaway from cube of 18"; x 36";; mounting flange at top allows additional capacity to be added.Equipped with: -- Automatic material density adjustment. -- Automatic hopper shutoff. -- SIEMENS PLC Control.

MOTORIZED PALLET CONVEYOR -- 48" X 10 Feet -- Motorized with 3/4 HP Motor -- To be use as an Accumulation Conveyor -- Loaded on your Truck

Live bottom screw feed for wood chips to feed boiler. New. Call 800-459-2148 for more info.

50 OAL 24” wide, Portable Belt Conveyor, gas Engine

18' Auger W/ Motor and Drive 24" Auger

STI - AP 980 M (could be an Automation Plus) Bagging System With Bin and Bag Flattener to Pallet Stacking Stand

Incline Conveyor 23' long 24" wide Includes 3 phase electric motor and switch box Ready to load on truck

Belly Conveyor 9' long 30" wide Includes 3 phase electric motor and switch box Ready to load on truck

Infeed Conveyor 31' long 30" wide Includes 3 phase electric motor and switch box Ready to load on truck

Infeed Conveyor 13.5' Length 36" Width 8' Drop Height 25 HP 3 Phase - 230/460V Came Out Running

Bark Auger 16" x 24' 12" auger with hydraulic drive

New 36" wide x 20' long Heavy Duty Inclined Feed Conveyor 12" Sides Cleated belt with 2" high cleats on 24" centers 6" diameter feed roller with bearings in a heavy duty slide frame allowing adjustment for belt alignment 8" diameter drive roll Driven by a 2 HP motor/gearbox with a chain /sprocket system. Bottom of the conveyor is app 6" off the floor. The exit height (distance from the floor to the bottom of the drive roller) is app 135" There is a hopper at the bottom of the conveyor that is 60" wide Distance from the floor to the top of the hopper is app 42". This height is ideal for use with a box dumper All legs have a height adjustment of 12". Motor will handle a VSD if wanted. 460V/3PH/60Hz. Note: The front legs are set back 80" which allows the conveyor to clear a Vecoplan Shredder and drop the material into the hopper

Inclined Cleated Conveyor 24' Long 24" Width 3" Cleats 2 HP Approx 10'-12' Drop Height Came Out Running

MLS Number 11202465 Straight Wall Storage Bins 2- 17-unit straight wall bins ( for hog fuel) Were in operation for less than 2 weeks Voltage 575 Drawing available Price includes dismantling and loading Two weeks to dismantle and load