Equipment For Sale

2006 Diamond Z Model 1463B Tub Grinder, Trailerized Has Been Re- Built with New Components, Has Cat 3412E Engine With only 1,000 Hours, Wireless Remote Control, Metal Pully Head on Discharge Conveyor Compressor, Ready for Work. Weight 98,000 Length 46' Width 11'11" Height 14' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2001 DIAMOND Z 1460B-15 TUB GRINDER REDUCED All new joy couplers new tires new hoses cat 3412 engine remote everything works currently used 1-2 times per week

Great running Diamond Z DZH4000 with a Cat C18. Everything works as it should. Has a rod Puller

2012 Diamond Z DZH6000 with a C-27 1000hp engine with 6,185 hours. Extra parts and screens, service records available. Weight 93,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Diamond Z H4000 TK Horizontal Grinder, Equipped with a Caterpillar C-18 765 HP Turbo Engine. Has 6,900 Original Hours, Wireless Control Remote System, Undercarriage is 95%, Metal Pully on Discharge Conveyor, New Air System to Radiator, New Conveyor Belt ,R-5 Bottom, Ready for Work, Most of hours are Idling, Ready for Work. Weight 85,000 Length 41'5" Weight 10'3" Height 12' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2023 Diamond Z 1463B -150 hours -1200hp tier 4 cat Engine -Radial magnetic belt -Air compressor and engines screen protection Turn Key !!!!showroom quality still

2023 Diamond Z DZT 8000 Track Tub Grinder, 600hrs, Magnetic Head Pulley, Radio Remote, Transport Dolly, Excellent Condition. Weight 96,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Diamond Z 1463B Tub Grinder -3051 hours -Cat C-32 Tier 2 1200 hp engine -New hydraulic pump -Brand new fuel tanks -Hydraulic valve update Clean machine turn key!!!!

2001 Diamond Z 1463B Tub Grinder, Frame hours are unknown at this time. 400 hours since 3412 rebuild. Everything runs as it should. Grates supports will need to be address as some point. Weight 98,000 Length 46' Width 11'11" Height 14' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! 2 YEAR/2,000 HOUR WARRANTY!! 113 HP Kubota 4 cyl Turbo Diesel w/ top speed of 22mph, All wheel steer/control, Operating weight 27,029lbs. This model is capable of lifting 4300lb over 54 feet and 8,300 close up. Dual outriggers and single hand, muti-function operator joystick. Hydrostatic drive Shipping not included! Call for Pricing!!!!

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! Enclosed Cab, Air Conditioner, 44 ft Max Lift Height, 10000 lb Max Lift Capacity, US EPA Label, 60 in Forks, Manual Coupler, Outriggers, Frame Leveling, Auxiliary Hydraulic Plumbing, 10.00x20 Tires

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! 2 YEAR/2,000 HOUR WARRANTY!! 113 HP Kubota 4 cyl Turbo Diesel w/ top speed of 22mph, All wheel steer/control, Operating weight 26,676 lb. This model is capable of lifting up to 8,500 lbs with a max lift of 44ft. Dual outriggers and single hand, muti-function operator joystick. Hydrostatic drive Shipping not included! Call for Pricing!!!!

Hex 45" Whole Log Metal Detector

DIEHL STRAIGHT LINE RIP

The seller has upgraded to a new machine and no longer needs this rip saw. This machine still runs a few times a week at the shop. 15 HP Motor 2 HP Feed Motor 2" Arbor 16" Max blade capacity Chain drive

MLS Number 10682943 DIEHL SL52 STRAIGHT LINE RIP SAW Bottom arbor 4-1/4"X8-1/2" capacity 15 HP 3,545 RPM arbor drive motor Infeed speed up to 200 FPM Serial# 10/88M-5312-4728 Voltage: 460/60/3 phase Amps: 21.7 Wiring diagram # 2-9000-0026 Was removed from service in November 2020

DIEHL 990 GANGRIP SAW Product No. 1001 30 HP - 3600 RPM arbor motor-AB size 4 starter-110 volt controls 12 " arbor width with 3-1/2" maximum thickness 8 roll feed - 4 top (powered) - 4 bottom Anti-kick back fingers : top and bottom One (1) saw cartridge-2 3/4 " saw blade bore New arbor bearings 5 HP feed: single speed Rip fence Outboard bearing on arbor 3" throat capacity to 1st saw blade Cleaned, painted and checked Serial # : 54174 Year: 1958

Diehl model MR-90 Gang Rip Saw Twelve ( 12 ) inch saw arbor width capacity- Roll feed 50 HP 3600 RPM arbor motor -direct coupled wired 480 volts, 3 phase- new motor bearings 2 HP variable speed feed motor 50 to 150 FPM feed speed-variable Four powered top feed rolls- Excellant feed roll gears 12 inch arbor with one (1) sleeve with spacers Adjustable rip fence Serial number : 66M-1668 Cleaned , checked , and painted

Diehl SL 50 Straight Line rip saw with adjustable infeed speed controller 15HP 480 volt 14” saw blade feed chain 8 ¼” wide, Table dimensions: 80” x 57” Serial # 65M1297570 We also have available a Diehl SL 52 in our inventory A wooden pallet/crate will be built for shipping at no charge Contact us for price including freight. Can test run saw with video upon request. Stored in our warehouse for prompt delivery.

DIEHL - TFM-68, ...4"; x 8"; 5-Head High Speed Jointed Moulder5-Head (B-R-L-R-T-B) with 8-5/8" x 4-1/2" capacity. Head sequence: Bottom 15 HP, Right 10 HP, Left 10 HP, Right 10 HP, Top 15 HP, and Bottom 20 HP motor.1st Bottom and 1st right side run at 3,600 RPM; all the other spindles run at 6,000 RPM utilizing the included Frequency Changer.Side heads tilt 35° inward and 5° outward. Specifications: -- Spindle diameter: Vertical 1-13/16"; Horizontal 2-1/8" dia. for top spindle only. -- Built-in straight & profile jointers on spindles 2 - 3 - 4 & 5. -- Variable feed speed from 20 - 150 FPM via 15 HP feed drive. -- Cardan Shaft driven. -- WAXLIT Pump and groove bed with groove cutters for 1st bottom. -- Air chipbreakers and feed roll tensioning. -- Starting panel and transformer included.Weight: Approx. 14,000 Lbs