Equipment For Sale

New Doosan DX225LL Log Loader in Stock, Call today for excellent pricing.

2015 Doosan DX225LC Excavator 7141 hours Hyd thumb Heat AC UC 80% Plumbed for aux hyds Extra counter weight Very little play in bucket bushing Runs and operates good Using daily

2017 Doosan DX300 LL, 6000 hrs., w/Southstar QS605, $300,000

New Doosan DL280 Wheel Loader, Hydraulic Coupler, Bucket. Call today for pricing.

2018 Dorsey Trailer, Good tires, maintained well, located in Tazewell, VA Contact Zach for more information. Ready to hit the road. 931-224-0699

1991 Dorsey open top walking floor trailer; swinging doors; spring ride; serial number 1DTV75W22MA200926

Aluminum Open Top, Spring Suspension, Aluminum Top Hinge Door, Aluminum Floor, 22.5 Tires Shurco Lock and Roll Tarp, Extruded Aluminum Top and Bottom Rail, Side Post on 16" Center Settings, Aluminum Prepainted White Sides, Front Ladder Same trailer with Slide tarp $41,900 Same trailer with Live Floor $66,900 Prices are plus FET LMI is your go to source for semi-truck trailers located in Waverly, Tennessee! We have been family owned and operated since 1980. We are North America’s largest stocking dealer of lowboy trailers. We are proud to be ranked #1 in New Trailer Sales for Pitts Trailers since 2009, Dorsey’s Top Dealer since 2015, Jet’s largest detach dealer, and Landoll’s Top 3 Dealer since 2019. Our inventory also includes new and used forestry, scrap, and material handling equipment and trailers, and we’re proud to be an authorized dealer for Barko, Robotec, CSI, and Demco. We also carry parts for the equipment lines we carry. Give us a call today and we will get your parts shipped out quickly. Need your purchase moved? We have a network of over the road trucks to get your trailer to you ASAP! Need your purchase financed? We offer financing options to fit your needs. We accept and welcome used trade-in trailers, as well as purchase used trailers. Our location stocks and install on-demand the following: toolboxes, ramp kits, chains, binders, straps, bungees, bulkheads, headache racks, tarps, sliding tarp systems, aluminum wheels, new and used tires, everything you would need for your flatbed, drop deck or lowboy. Check out our inventory online. If you don’t find what you’re looking for, contact us and we’ll help you track it down. We look forward to serving you!

Aluminum Open Top Live Floor, 48x102, Air Ride Sliding Tandem, Aluminum Rear Barn Style Doors, 22.5 Tires, Shurco Lock and Roll Tarp, Hallco 4000 Series Floor with 3/16 Slats, Extruded Aluminum Top and Bottom Rail, Side Post on 12" Center Settings, 12" Crossmembers, Aluminum Prepainted White Sides, Front Ladders Air Ride 45x102 $69,500 Spring Ride $66,900 Prices are plus FET LMI is your go to source for semi-truck trailers located in Waverly, Tennessee! We have been family owned and operated since 1980. We are North America’s largest stocking dealer of lowboy trailers. We are proud to be ranked #1 in New Trailer Sales for Pitts Trailers since 2009, Dorsey’s Top Dealer since 2015, Jet’s largest detach dealer, and Landoll’s Top 3 Dealer since 2019. Our inventory also includes new and used forestry, scrap, and material handling equipment and trailers, and we’re proud to be an authorized dealer for Barko, Robotec, CSI, and Demco. We also carry parts for the equipment lines we carry. Give us a call today and we will get your parts shipped out quickly. Need your purchase moved? We have a network of over the road trucks to get your trailer to you ASAP! Need your purchase financed? We offer financing options to fit your needs. We accept and welcome used trade-in trailers, as well as purchase used trailers. Our location stocks and install on-demand the following: toolboxes, ramp kits, chains, binders, straps, bungees, bulkheads, headache racks, tarps, sliding tarp systems, aluminum wheels, new and used tires, everything you would need for your flatbed, drop deck or lowboy. Check out our inventory online. If you don’t find what you’re looking for, contact us and we’ll help you track it down. We look forward to serving you!

DOUCET 16-Section Clamp Carrier 16.5' wide(16) Sections with 16.5' wide usable clamping widthComplete with: -- (12) Clamps per section (total of 192 clamps). -- 48" Opening clamps, 3-1/2" high x 4 1/2" jaw width. -- (1) Pneumatic panel flattener. -- Heavy-Duty, 5 HP hydraulic pump for rotation drive -- (1) Hydraulic torque wrench clamp tightener;Actual model # "SRH-16-16.5-19+2-48RNote: Tear down not included.

- 16.5' long - 16 rotating arms and a total of 288 - 32" clamps

DOUCET CLAMP CARRIER 30 SECT X 8 FT 6 IN WIDE (200+) 36" CLAMPS MODEL SRH-1 SX30- 8.5-240-36 SN 87-10-28 Includes: HYD PWR PACK, PANEL FLATTENER Dismantled and ready to load!

Good Condition 3 phase .5 HP motor

DOUCET 16-SECTION Clamp Carrier (Hydraulic)Specifications: -- (16) Sections, 8-1/2' width, -- (6) Clamps per section (86) clamps total, -- 32" Clamp opening (rapid change) with 2-1/2" high jaws.Complete with: -- 5 HP hydraulic power pack and motor for rotation -- Hydraulic clamp tightening; -- Pneumatic overhead panel flattener.Note: Tear down included

DOUCET MFE 300 Lateral chain feeder for moulders and optimizers -- 3'0" x 16'-0" working deck for material length 2'0" - 16'0"; width 2" to 9.5" and thickness 1/2" to 4". -- Feed system: Hydraulic variable speed 50-300 FPM with a 20 HP power unit. In-feed (4) roller accelerator; (2) top steel rollers and (2) bottom drive roller. Additional idler rollers along feed fence to support lumber during feeding. -- Chains: Transport length of lateral chain feeder 3'0". (8) strands of C2060 chains on pneumatic up/down device to release lateral pressure on board when feeding. -- Pedestal: Feeder controls mounted to pedestal with extended cable. Interface relay to stop feeder when moulder is stopped. -- Adjustments: Tool less adjustment handles for quick setups. Easy access to for thickness adjustments at front side of feeder. -- AVAILABLE OPTIONSOne (1) set of four (4) feeding wheels made of steel with hardenedsurface teeth $ 1 000.One (1) set of four (4) feeding flat wheels made of steel, 2" wide insteadof 1" for wide material feeding $ 500.One (1) set of four (4) feeding flat wheels made of steel 1" wide $ N/C.Guiding Tunnel between feeder and moulder,Standard Guiding Tunnel (4' long) $ 1 650.Standard Short Guiding Tunnel (32" long) $ 2 100.Complete Guiding Tunnel (4' long) $ 2 700.Complete Guiding Tunnel with adjustable fence (4' long) $ 3 800.Motorized Guiding Tunnel (4' long) on request.Additional chain transfer length capacity (up to a maximum of 6additional feet) For MFE-300-16 sold per foot $ 1 685. Note: More than 6 add. feet: price upon requestSteel plates between chainsFor MFE-300-16 $ 1 050.Platen chains recommended for softwood speciesFor MFE-300-16 $ 2 850.One (1) additional chain for shorter material down to $ 1 750.18" min. lengthPressurized lateral guide with roller bearing end $ 1 400.Powered lateral guide with roller and side guides on request.Custom working height on request.

DOUCET EM-2 End Matcher, Double End:Specifications: -- 12" Min. to 96" max. length x 1-3/4" to 5" width x 3/4" thick cap.; bar spacing is available at 12" center to center. -- Feed chains are is powered by a 3 HP fixed speed drive at 28 lugs per minute (simple to add a variable speed drive). Equipped with independent tongue & groove machining centers laid out on opposite sides of the transport table. -- Capacity is approx. 8,000 - 10,000 board feet per shift based on feed stock 2-1/4" wide x 36" long. Tongue & Groove Machining Centers with: -- 12" Dia. squaring saw; tongue station features a bottom & a 10" dia. top groover; Groove Station with 10" dia. groover; (5) squaring saws & groovers are powered by 3 HP arbor motors. -- When the machining centers, material is pushed up against the holddown press foot for justification with respect to the top of the board; material is placed between the traverse bars at the infeed end of the machine. -- While random length pieces are brought forward, material is positioned by perpendicular roller conveyors ahead of both machining centers; 3rd roller conveyor takes care of lateral outfeed. -- Roller conveyors are 24" wide and are embedded into the transport table; system equipped with motorized pinch roller to re-align pieces longer than 60" prior to the 2nd machining center. -- End-Matcher Model "EM" is designed for end-matching of strip flooring in a mid-sized volume production environment; End-Matcher "EM" is 21' long; overall width including the machining centers is 8 feet.

2001 Doucet EM2 End Matcher

Doucet MSP-CR-19-48-15-TRF-C-8-7 Conveyor

DOUCET 12-SECTION Clamp Carrier (Hydraulic)Specifications: -- (12) Sections, 8-1/2' width, -- (9) Clamps per section (108) clamps total, -- 36" Clamp opening (rapid change) with 2-1/2" high jaws.Complete with: -- 5 HP hydraulic power pack and motor for rotation -- Hydraulic clamp tightening; -- Pneumatic overhead panel flattener.Note: Tear down not included

Doucet Clamp Carrier Model SRH-40-8.5-240-36 40 Section Clamp 8.5' Wide (240) 2-1/2" x 36" Clamps - Rapid Change Voltage: 480/3/60

DRESSER S450E Road Grader