Equipment For Sale
10620 Results Found
Call for Price
Homag Centateq N300 CNC Router Infeed system Outfeed table Boring block (2) Vacuum Pumps
Call for Price
HOMAG KL 78/A20/S2 EDGEBANDER W/PRE-MILL & CORNER ROUNDING: -- Specifications: 0.4 - 20 mm (0.02" - 0.78") Edge thickness cap.; min. panel width 55 mm (2.18") for panel thickness 12 - 22 mm (0.5" - 0.875") and under; 100 mm (3.9") for panel thickness over 22 - 60 mm (0.875" - 2.3"); for up to 3 mm coil stock, HPL, and strip stock up to 20 mm (3/4").Feed & Infeed Section of Machine: -- Top pressure beam with: Double-wide compound V-belts; 80 mm wide feed track chain plates, vulcanized rubber insert pads, and Auto-Lube; variable feed speed from 18 - 24 MPM (59 - 79 FPM); 950 mm height/working level infeed. -- Premilling Station with: (2) 3 kW - 150 Hz; 9,000 RPM Motors; panel blow off device; 2-position infeed fence (on/off); SIKO digital manual fence control. -- Panel Preheater with: Quartz lamp for heating substrate edge before glue application. -- Edge Feeding device equipped with: Automatic coil magazine for quick coil changeover; strip feeder for up to 20 mm (3/4") solid wood banding. -- "Quick Melt" Glue System with: Reversible glue roller applicator; pressure roll section with (1) large dia. driven and (6) idle rollers; manual adjustment of pressure zone through SIKO digital counters for different edge thicknesses.Edgebanding Workstations: -- Double motor front & rear end trim; straight & chamfer trimming (0.8 HP - 12,000 RPM ea. motor). -- Top & Bottom flush trim (2 HP - 12,000 RPM ea. motor). -- Corner Rounding unit: Equipped with (4) motors; 2 HP - 12,000 RPM each motor. -- Universal Milling/Grooving Unit: Tiltable 90°. -- Edge Scrape Superfinishing unit for: Thick PVC/ABS with chip collection box. -- Top & Bottom Flat Glue Scraper: Removes potential glue squeeze out. -- Top & Bottom oscillating buffing unit: (2) 0.33 HP - 1,650 RPM motors. -- "HOMATIC NC 21" Controller features: Keypad & LCD display; stores working programs and controls functions of workstations; allows fault diagnostic and more, etc. -- Complete with: PLC Controlled, motorized beam height adjustment; Servo adjustments on Top & Bottom flush trim, and Servo controlled Scraper Stations. -- Electronic DC brakes: On all trim motors; sound cabins for all trim workstations; adjustable outboard panel support. -- Actual Model: HOMAG KL 78/A20/S2.
Call for Price
- Min. panel height 0.47 inch - Max. panel height 1.57 inch - Min. edge thickness 0.01 inch - Max. edge thickness 0.24 inch - Max. forward feed speed 82.02 ft/min - Top pressure with rubber belt - No. Panel Sizing / Milling units 2 Pre-milling unit - Lamps to preheat the side of the panel - Edge coil magazine - Gluing system - glue pot for EVA hot melt glue - premelter for EVA hot melt glue - QA65 - Roller set to press the edge - no. pressure roller 7 - with positioning by NC No. Edge Processing Units 6 First Processing Unit - End trimming Constructor model HL81 - no. motors 2 - with positioning by NC Second Processing Unit - top and bottom rough trimming - no. motors 2 - with positioning by NC Third Processing Unit - Multi Function trimming and corner rounding - Constructor model - FK11 - no. motors 2 - with positioning by NC Fourth Processing unit - edge scraping - with positioning by NC Fifth Processing Unit - glue scraping - with positioning by NC Sixth Processing Unit - buffing - no. motors 2 Spray unit Control system Power Touch
Call for Price
Weeke Model Optimal BHX050 Vertical CNC Machine 8 Vertical Drilling Spindels 2 Horizontal Spindle in X-Direction 1 Horizontal Spindle in Y-Direction Grooving Saw in X-Direction 1 Powerful 5kW ETP 25 Routing Spindle Vector Speed: X-30M/Min Y-30M/Min Z-15M/Min
Call for Price
Call for Price
Call for Price
7' x 23' Honeyville Bag House Dust Collecting System with Blower & Stand 86 10' Tubes, Ready to Ship.
SALE PENDING
1998 HOOD 24000 LOG LOADER METER READS 7,739 SLASHER PILOT CONTROLS HEAT RADIO GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN GRANITEHE.COM
SALE PENDING
2001 HOOD 182 LOG LOADER 9,512 HOURS TIGHT PINS AND BUSHINGS RUNS VERY GOOD JOYSTICK CONTROL GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN GRANITEHE.COM
SALE PENDING
2000 HOOD 24000 LOG LOADER 10,353 HOURS 6068 DEERE ENGINE SLASHER NO RUST VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN GRANITEHE.COM
$ 39,900
1986 HOOD 24000 LOADER/SLASHER. NEW PINS AND BUSHINGS. MOUNTED ON 2001 MACK WITH 350 ENGINE AND 9 SPEED TRANSMISSION. READY TO WORK. FINANCING AVAILABLE WITH NO MONEY DOWN AND 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT. FINANCING OPTIONS AVAILABLE FOR MOST CREDIT TYPES. WWW.GRANITEHE.COM
SALE PENDING
1991 HOOD 24000 LOG LOADER 1000 HRS ON REBUILT ENGINE JD 6068 SELF PROPELLED LOAD/SLASHER HYD BUCKBOARD LIVE HEEL GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM
$ 7,500
$ 110,000
$ 10,000
Call for Price
$ 20,000
2001 Hood 24000 loader -unknown hours -Loader is continuous rotation -Live heal set up to run circle saw -50/52 Rotobec bucket Needs trailer
$ 89,500
$ 80,000
Mitsubishi engine, good hydraulics, this machine is in operating condition. Call 440-983-9481 for more information.