Equipment For Sale

2014 International Pro Star tandem axle, sleeper cab tractor, 40" sleeper, Maxx Force 13; 430 hp., Jake Brake, Eaton Fuller 10-speed trans., air ride, 11R/22.5 steer tires, 295/75R 22.5 drive tires, aluminum wheels, wet kit, 385,563 miles, serial number 3HSDHSJR9EN763708

2007 Pro Star Limited with Sleeper Cab

2007 Pro Star Limited with Sleeper Cab

1998 International Paystar Tri Axle Log Truck, 8 Speed, M11 Engine, 20 Front axles, 46 Rears, Runs Good

2007 International Paystar 5000 -52000 original miles -ISX 15l Cummins -A.C works but needs recharge -Boom length is 125ft -Two man bucket -Back three axles have true air lockers -Good tires and lights

INTERNATIONAL MT-4843 Manual-Tie Horizontal Baler With Infeed ConveyorSpecifications: -- Cylinder: 8" -- Opening size: 60" x 46" -- Main motor: 40 HPEquipped with: -- Control panel -- Oil Cooler – Air-Over-Oil -- 10' Bale Run-Out Table -- High-Temp/Low Oil Level Shutdown -- 48" x 43" x 60" Bale Size

International S2500 Log Truck 13 speed Lift axle Dayton wheels 11-22.5 tires are good 21' bed Work ready VIN 1HTZPJUR5GHA17203

International TD8E Dozer Gearmatic winch Approx 3k hours Used as backup Was a previous oil field machine 6 way blade No leaks New starter and alternator New rear sprockets and idlers Runs and operates good

INTERNATIONAL TITAN 6-EC Closed Door Horizontal Baler with ConveyorSpecifications: -- Cylinder: 8"; -- Motor: 20 HP -- Cycle time: 32 Sec Cycle Time -- System pressure: 3,000 PSI -- Total force: 150,800 Lbs -- Ram face pressure: 87 PSI -- Feed opening: 58"; x 35"; -- Bale size: 60"; x 48"; x 30"; Equipped with: -- Feed conveyor: 48" wide -- Programmable controller -- Ethernet connection

INTERNATIONAL - TITAN-60-EC, Wide-Mouth Closed-Door Horizontal BalerSpecifications: -- Cylinder: 8" -- Feed opening: 56" x 40" -- Main motor: 30 HP -- Max. ram force: 175,929 LbsEquipped with: -- Ethernet MICROLOGIC 1100 PL Controller -- Regen Hydraulics -- Adjustable serrated shear blade -- Tongue & Groove floor -- AR 400 Floor Plate -- Conveyor controls and conveyor hopper

INTERNATIONAL TITAN-60-EC Full Eject Horizontal Baler with ConveyorSpecifications: -- Cylinder: 8" -- Main motor: 20 HP -- Feed opening: 58"; x 35"; -- Bale Size: 60"; x 48"; x 30"; -- Feed conveyor width: 48" -- Ram face pressure: 3,000 PSI -- Total force: 150,800 Lbs -- Cycle time: 32 Sec (14 Sec short stroke)Equipped with: -- Programmable controller with Ethernet -- Conveyor controls and conveyor hopper

IBC Horizontal Closed Door Baler Model NA-1296A-48 -- 50 HP Motor --10″ Main Cylinder --Bale Size: 30″ x 45″ x 60″ --Hopper Size: 57″L x 45″W --Platen Pressure: 134 PSI --System Pressure: 3,000 PSI --Total Force: 235,620 lbs --New cylinder installed approximately 6 months ago

IBC Horizontal Auto Tie Baler IBC 4343 X 8 – 50 - 63 --Model AT-4343-8-50-63 --Type Auto-Tie Baler --Motor 50HP --Cylinder Bore 8"; --Bale Size 43"; x 43"; x Variable --Manufacturing Date 2009

INTERNATIONAL BALER - IB-4430-50, ...Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8". -- Ram force: 125,660 Lbs. -- (6) Tension cylinders: 4" Bore. -- Feed opening: 42" x 50". -- Main motor: 40 HP.Equipped with: -- Shear blade with adjustable striker bar. -- Regin hydraulics. -- LED Indicators for bale functions. -- Autostart electronic beam. -- Oil cooler. -- Replaceable T-1 floor.NOTE: Ram needs some repair.

INTERNATIONAL - 1272-HD, ...Horizontal Closed BalerNOTE: Complete with Fluffer!SPECIFICATIONS: -- Bale Size: 72" x 30" x 36" -- Main Motor: 30 HP -- Cylinder: 7" -- Feed Opening: 50" x 28" -- Total force: 86,500 Lbs -- Cycle Time: 23 Sec -- Shipping weight: Approx. 8,500 LbsFeatures: -- Single Fluffer -- Hopper is included

INTERNATIONAL - NA-1295HD, ...Closed Door Horizontal BalerSpecifications: -- Bale size: 72" x 44" x 36" -- Main cylinder bore: 8" -- Total force: 113,000 Lbs -- Ram face pressure: 71 PSI -- Feed opening: 42" x 50" -- Cycle time: 30 sec -- Main motor: 30 HPFeatures: -- PLC Control -- Bale table -- Shear bar -- Heavy-duty welded construction -- Heavy-duty hydraulic system -- Easy-to-operate controls

Interwood B3223 Boring Machine 23-Spindles Manufacturer Specs (to be confirmed): (2) 1.5kw, 220/380v, 3ph motors (2) banks of (23) drills 32mm drill spacing (8) spring hold downs (2) pneumatic locators 50-1/2 inch x 30 inch table Pneumatic operation / foot pedal

INTOREX HB-65 Automatic Dowel Milling Machine. For round dowels, table legs, broom handles, agricultural tool handles (concentric), umbrellas, stair rails, etc.Specifications: -- Automatic machine for rounding square stock with a cutter head that has (3) tools and finished diameters between 15 and 65 mm (3/32" to 2-1/2"). Unlimited working length. -- The head drive is 8.5 KW (10 HP). -- Working advance speed adjustable between 8 and 30 meters/Min. (26.25 to 98.5 FPM.) by means of a potentiometer. -- The machine has (4) draw-in rollers and (4) draw-out rollers to guarantee the uniform advance of the bar and good finish quality. -- INTOREX is designed and quality-built in Spain. -- Dimensions: 1500 mm (59.1" long x 1200 (47.3") wide x 1400 ( 55.2") high. Approx weight 850 Kg (1870 Lbs).

INTOREX TX-1600 Hydraulic Copy Lathe Hopper Feed. Overall Specs: -- Full automatic, equipped with (2) hydraulic copiers, (2) tool holder units, (2) back knives, Hopper Feed, Automatic Loading System. and electronic PLC control. Carriage runs on ball screw and tempered/ground guides. -- 1,600 mm (63") Max. between centers; hopper loading capacity of 140 x 140 mm (5.5" sq.) in automatic cycle and 210 mm (8.3") diameter in semi-automatice cycle. -- 10 HP Main motor with a variable speed of 730 - 5100 RPM; 3 HP hydraulic power pack. _ Fitted with PLC programmed logic to assist in setup; All working units (advance carriage, tailstock, tool holder units, etc) are hydraulically powered with independently adjustable speeds. -- Copying system with (2) hydraulic copier knives and traveling steady rest; includes a pre-rounding knife in front of steady; hydraulically powered back knives for doweling or plugging with form tools. -- Includes: Tooling, front safety guard; front mounted electrical panel with easy access to all pushbuttons and controls, and LED RPM display.

IPS - AT-752-20, ...Horizontal Auto-Tie BalerReconditioned Baler ready to handle your recycling needs! Specifications: -- Main cylinder: 7″ -- Tension cylinder: 6″ -- Bale size: 43″ x 43″ x Variable -- Charge box opening: 41″ x 50″ -- Total force: 115,400 Lbs -- Motor: 20 HP -- System pressure: 3,000 PSI -- Ram Face pressure: 63 PSI -- Oil reservoir: 125 Gallons