Equipment For Sale

2001 BARKO 295 LOG LOADER METER READS 8,097 HOURS DELIMBER BUCKSAW NOT INCLUDED,, BUCKSAW CAN BE ADDED FOR ADDITIONAL $10,000 GOOD TRAILER CLEAN CAB GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTH DEFERRED PAYMENTS WITH GOOD CREDIT IN-HOUSE FINANCING FOR LOW CREDIT TYPES GRANITEHE.COM

2014 Barko 612 Forwarder, Volvo Engine, Original Hours are 8000 Hours, Enclosed Cab with Heat and Air Conditioning, New Front Tires in Front and Rear Tires are 90%, Centers Replaced, Kesla Loader, 28HD Bucket, Ready for the Woods. Length 33 ft 10 in Width 8 ft 8 in Height 11 ft 3 in Weight 35,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Barko 612 Forwarder, Volvo Engine, Original Hours are 8000 Hours, Enclosed Cab with Heat and Air Conditioning, New Front Tires in Front and Rear Tires are 90%, Centers Replaced, Kesla Loader, 28HD Bucket, Ready for the Woods. Length 33 ft 10 in Width 8 ft 8 in Height 11 ft 3 in Weight 35,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Barr Mullin Wondersaw Optimizer with Computerized Laser Controls Tichniess: Up to 3" Width: 31" Min cut: 4" Feed height: 34-1/2" Floor Space: Apprx 21' x 15' 480 volt

0.75YD3 CAPACITY 36IN MAGNET DIAMETER FITS CAT MH3026 OPEN TINES WIDTH 90IN

Bauer Disk Refiner with 2 250 HP Motors. Good Condition Removed from Working Environment. 3 Units Available. More Details Coming Soon.

Bauer Disk Refiner with 2 400 HP Motors. Good Condition Removed from Working Environment. 3 Units Available. More Details Coming Soon.

Baxley Green Lumber Stacker - handles lumber up to 20 feet long.   Uses 6 foot long stacking sticks and features automatic stick laying.   Built on the Gillingham-Best design.    Mechanically complete but NO CONTROLS. Visit https://benjones.com/shop/102287/ for more information.

Baxter Whitney & Sons Planer model 32-A manufactured in mid 1940s. This planer was taken out of service in good working order about 8 years ago. I have not used it. There is one pulley that has a broken edge as seen in photo 9319. This was broken in transit and should not affect its function . This planer has a 15 hp, 3 ph main motor with a 3 hp feed motor. Dust hood included. It will need to be picked up with a roll body truck. It comes with the knife sharpener and the sharpener box. Call 800-459-2148 for more info.

ENGINE - 22 HP Honda GX690 - 50.1 cutting hours SAW HEAD - Maximum log diameter / board width of 42 inches - 1 inch 1/4 last board cut capability - Blade of 203 x 1 1/2 APEX RF (10 blades included) - Electric Saw Head positioning and auto-lock electric winch of 4000 lbs mounted on a drum shaft with double cables of aeronautical quality?? - Hydraulic blade tensioner with pressure indicator - High grade triple bearing blade-guide, Zinc design and adapted for heavy usage, with 20 inch wheels - Large 7 gallons (26 liters) removable lubrification tank BASE - Up to 21 feet maximum board length, onto a 24 feet bed - Extra solid steel tubing frame 2X6 3/16, completely welded with crosspieces, no joints - 2 log clamp, simple one hand cam-lock design - 4 adjustable jacks and 5 stabilizing legs for maximum stability TOWING EQUIPMENT - 3000 lb suspension axels, alloy wheels, high quality tires and wheel fenders - Drawbar with 2 inches trailer tongue, and 3500 lb security chain - Integrated brake lights and turn signals Call 760-798-5410

BECKER VTLF 2.400 Vacuum pump:Seller states the pump was only turned on a few times15 HP Oil-less (Dry) Rotary Vane vacuum pump system, rated @ 270 CFM open flow, max. 23.6" Hg; heavy duty construction, compact design, small foot print. -- 100% Oil-less vacuum pump is virtually maintenance free with built-in carbon vanes and built-in suction filters. Complete with: Vacuum regulating valve, secondary suction for additional cooling, blow-off valve/silencer, 4" BSP x 4" NPT Nipple; coupled to a 886 RPM TEFC motor.

Becker VTLF 250 Vacuum Pump: 7.5 kW (10 HP) Oil-less (Dry) Rotary Vane Vacuum Pump System, 176 CFM, max. 25"Hg; Heavy Duty construction, compact design, small foot print. -- 100% Oil-less vacuum pump is virtually maintenance-free with built-in carbon vanes & built-in suction filters, vacuum regulating valve, secondary suction for additional cooling, blow off valve/silencer; 2-1/2" BSP x 2" NPT nipple coupled to a TEFC; 400/480V, 1,160 RPM motor

BECKER KVT 3.100 3.6 Kw (5 HP) Vacuum pump:Oil-less (Dry) Rotary Vane Vacuum Pump System, rated at 69 CFM and 100 cm/Hr with max. 27"Hg; Heavy Duty construction, compact design, small foot print. -- 100% Oil-less vacuum pump is virtually maintenance-free with built-in carbon vanes & built-in suction filters, vacuum regulating valve, secondary suction for additional cooling, blowoff valve/silencer. -- Complete WithInlet vacuum air filter system.

BELFAB NBM6-30 CHIP & DUST TRANSFER DUST COLLECTOR Patented Modular Technology and heavy-duty construction for exterior use. Heavy Duty construction designed for interior or exterior use.Specifications: -- Each "NBM" filter module is fitted with; (1) service door & (1) explosion door per NFPA safety regulations, and integrated compact hopper. -- Rated Capacity: Rated @ 9,000 CFM @ 9.5" static pressure, 7,600 CFM @ 10.4 static pressure. -- Equipped with: Direct drive centrifugal fan assembly with 30 HP "Hummer" blower motor, anti-spark cast aluminum impeller, 20" inlet diameter. Unit Includes: -- (6) "NBM" filter modules, each with (18) 7" x 60" Poly Twill cloth filter tubes; 990 sq. ft. total cloth area (165 sq. ft. per module) w/Continuous Dust Disposal Capacity. -- Pneumatic Chip / Dust Transfer System with (1) 7.5 HP and (1) 5 HP material handling blowers, continuously discharges chips and dust for re-cycling or disposal. -- (1) Electrical Control Panel w/ Shaker Mechanism to include; (4) Interlock Starters; (1) Soft start for the main blower, (2) for the Pneumatic Dust Transfer System and (1) for the shaker mechanism.Security System for Air Return: -- (1) 20" Explosion Back Draft Damper, (1) 24" Fire Damper with status signal, (1) 24" Derivation Tee, (1) 24" Abort Damper and (1) Single Zone Spark Detector. (Optional; pricing upon request)CALL FOR PRICING

BELFAB LW3-7.5 Modular Dust Collection SystemSelf-contained patented modular designed unit for interior use with 7.5 HP, 3,600 RPM and 3,500 CFM @ 7" static pressure, standard blower. -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (3) High Efficiency 1/8" thick needle felt cloth bags up and (3) plastic collection bags down, 126 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V -- Additional options available.

BELFAB LW3-10 Modular Dust Collection SystemSelf-contained patented modular designed unit for interior use; Specifications: -- 10 HP, 3,600 RPM and 4,600 CFM @ 7" static pressure, standard blower. -- 12" inlet -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- 126 Sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller.Equipped with: -- (3) High Efficiency 1/8" thick needle felt cloth bags up and (3) plastic collection bags down (includes set of 24" long extended machine legs to maximize collection capacity). -- Includes: Wired Magnetic starter for 208/230/460/600 V.NOTE: The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet.

BELFAB LW4-15 Modular Dust Collector. Self-contained patented modular designed unit for interior use with direct drive 15 HP - 3,600 RPM motor, 5,000 CFM centrifugal fan assembly @ 7" static pressure, standard blower. -- 14" Inlet -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower, and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (4) High Efficiency 1/8" thick needle felt cloth bags up and (4) Drum Adapter Kits for drum collection, 140 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V. -- Additional options available

BELFAB LW5-20 Modular Dust Collector. Self-contained patented modular designed unit for interior use with direct drive centrifugal fan assembly @ 7" static pressure. -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and 16" Inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (5) High Efficiency 1/8" thick needle felt cloth bags, 23.5" dia. x 64" L with 175 sq. ft. total cloth filter area and (5) Filter sleeves for 55 US-gal. drums (Not included) for collection. -- Wired Magnetic starter. -- Non-sparking Heavy-Duty cast aluminum impeller. -- 20 HP, Standard Blower with 5,000 CFM at 3,600 RPM -- Additional options and voltages available.

BELFAB NBM4-20 TILT TRUCK Modular Dust CollectorPatented Modular Technology; 6,000 CFM with a static pressure of 10"; designed for current need that can easily be upgraded, as required. -- Exterior design; each "NBM" filter module with (1) service door & (1) explosion door per NFPA 68 safety regulations, this unit has (4) filter modules.Specifications: -- Each "NBM" filter module with: (18) 7" x 60" poly twill filter tubes. -- Direct drive centrifugal fan assembly with: HUMMER 20 HP @ 1,800 RPM High Efficiency TEFC blower motor, UL & CSA approved; AMCA Class-C anti-spark blower assembly with Heavy Duty steel impeller. -- 16" In-let dia., 660 sq. ft. filter surface area. Control Panel & Shaker mechanism includes: -- (2) Interlock magnetic starters, (1) for the blower motor and (1) for the automatic shaker mechanism. -- Adjustable timer, pilot lights all pre-wired. -- Includes: (4) Heavy Duty plastic tilt trucks on rollers for disposal of waste. -- Options available, but not included are: Spark detection/fire suppression system, Fire & abort damper, 2-Way valve, Explosion vent conduit; ...please ask for quote.

BELFAB NBM5-20 TILT TRUCK Modular Dust CollectorPatented Modular Technology; 6,000 CFM with a static pressure of 10"; designed for current need that can easily be upgraded, as required. -- Exterior design; each "NBM" filter module with (1) service door & (1) explosion door per NFPA 68 safety regulations, this unit has (5) filter modules.Specifications: -- Each "NBM" filter module with: (18) 7" x 60" poly twill filter tubes. -- Direct drive centrifugal fan assembly with: HUMMER 20 HP @ 1,800 RPM High Efficiency TEFC blower motor, UL & CSA approved; AMCA Class-C anti-spark blower assembly with Heavy Duty steel impeller. -- 16" In-let dia., 660 sq. ft. filter surface area. Control Panel & Shaker mechanism includes: -- (2) Interlock magnetic starters, (1) for the blower motor and (1) for the automatic shaker mechanism. -- Adjustable timer, pilot lights all pre-wired. -- Includes: (5) Heavy Duty plastic tilt trucks on rollers for disposal of waste. -- Options available, but not included are: Spark detection/fire suppression system, Fire & abort damper, 2-Way valve, Explosion vent conduit; ...please ask for quote.CALL FOR PRICING