Equipment For Sale
10583 Results Found
Call for Price
Call for Price
Call for Price
$ 41,000
$ 14,050
Infeed to 10" Schurman gang edger; this item belongs with stock #727, which is also listed in our equipment for sale. - Call Jeff for more info at 574-370-5050
$ 64,500
10D G60 thin kerf double arbor schurman gang edger; this item belongs with stock #729, which is also listed in our equipment for sale. Call Jeff at 574-370-5050 for more info.
Call for Price
$ 38,500
Call for Price
9' Sherman Transfer Deck, 16' wide with H78A roof top chain, gear reduction drive, 16' jump up roll case, (9) 24"x6" rolls
Call for Price
Schutte model 280.100 Hammer Mill Includes: 125 HP Motor - 480v Includes: (3) Screens: Approx 1", 3/4", 3/8" (to be confirmed) Includes: Stand
SCHUTTE PULVERIZER COMPANY - Model 40 HZF, ...HammermillComplete with the following major components & features: -- Integrated 18", 4,000 CFM Blower. -- WEBSTER Horizontal Feeder. -- Control Panel. -- Main drive motor: 75 HP - 3,540 RPM; originally 220V but switched to 460 Volt. -- Hammer width approx. 1-1/4" wide. -- 3-1/4" Shaft. -- 24" Dia. Rotor and a tip speed of 22,600. -- 17-1/2" Rotor width. -- 3/4" Main chamber steel.MANUFACTURER'S STATED KEY FEATURES:● Heavy-Duty plate construction with replaceable liner plates. ● Heavy-Duty grates available in a variety of sizes. ● Heavy-Duty rotor assembly. ● 24" dia. x 3" thick flywheel. ● Built-in fan conveys material up to 50' vertically and 100' horizontally.● Reversible anvil. ● 2-Way reversible "raked" hammers pull wood in without feed rolls. NOTES: ● Dates to early 1990s. ● The" HZF Series" Horizontal Trim Scrap Grinder is a high-speed, high production Grinder designed specifically for processing longer lengths of wood scrap such as: Rippings, edging, and trim blocks. Available in (4) standard sizes from 10" to 36" wide.● Each model features a built-in fan driven off of the main mill shaft, saving energy and valuable floor space while also significantly increasing production.
SCHUTTE PULVERIZER COMPANY - Model 40 HZF, ...HammermillComplete with the following major components & features: -- Integrated 18", 4,000 CFM Blower. -- WEBSTER 16 Ft. Horizontal Vibrating Conveyor. -- Motor Controls. -- Main drive motor, 75 HP - 3,540 RPM. -- Hammer width is approximately 1-1/4 in. wide. -- 3-1/4" Shaft. -- 24" Dia. Rotor and a tip speed of 22,600. -- 17-1/2" Rotor width. -- 3/4" Main chamber steel. -- Factory Frame.MANUFACTURER'S STATED KEY FEATURES:● Heavy-Duty plate construction with replaceable liner plates. ● Heavy-Duty grates available in a variety of sizes. ● Heavy-Duty rotor assembly. ● 24" Dia. x 3" thick flywheel. ● Built-in fan conveys material up to 50' vertically and 100' horizontally.● Reversible anvil. ● 2-Way reversible "raked" hammers pull wood in without feed rolls. NOTES: ● The HZF Series Horizontal Trim Scrap Grinder is a high-speed, high production Grinder designed specifically for processing longer lengths of wood scrap such as rippings, edging, and trim blocks.● Available in (4) standard sizes from 10" to 36" wide.
Call for Price
SCHUTTE 280.100 HAMMERMILL -- Type 13100P -- Rotor 24" dia. x 48" wide -- Housing 3/4" thick -- Shaft speed 3,600 rpm -- Heavy duty, statically and dynamically balanced rotor -- (96) Standard notched heat treated hammers 3/8" thick -- Also included; two screens -- Motor 125 HP -- Applications; Planer shavings, dry wood chips, etc. etc.
Schutte Pallet Hog - Model 56-35 heavy duty horizontal hog. Features 50 inch wide horizontal feed opening with top and bottom powered rolls; 50 2-way, reversible swinging hammers with hardsurfaced tips ; 250 HP direct drive electric motor; 3/4" thick screen with 1-3/8" diameter holes; Rear discharge. Electrical cabinets included. Hammers are approximately 1-3/4" x 5" x 8". Serial #0506071.
Call for Price
Top feed hammermill with 18" x 36" feed opening. Features 250 HP direct drive motor. 1800 rpm. 3/8" hammers. Includes Benshaw softstart with 500 amp breaker. Also includes separate blower with 50 HP motor and softstarter. Ideal machine for secondary grinding to produce a real fine output.
Call for Price
Schutte Hammer Mill Horizontal Infeed HZF40 w/100HP Electric Motor and Attached Blower
Schutte horizontal hog, replaced shaft w/ blower & motor, heavy duty design (ref #162) Call Amy for more information (928) 723-9449