Equipment For Sale

Schutte Hammer Mill 40-HZF with 100HP Electric Motor. No. 172 Attached Blower.

Schutte Swing Hammer Grinder

Grinder. This machine is a Shutte grinder. With Webster vibratory infeed. Item #C625

Top feed hammermill with 18" x 36" feed opening. Features 250 HP direct drive motor. 1800 rpm. 3/8" hammers. Includes Benshaw softstart with 500 amp breaker. Also includes separate blower with 50 HP motor and softstarter. Ideal machine for secondary grinding to produce a real fine output.

2008 SCM Morbidelli Universal 3612

Model 3 RCS 95 600 V / 3 Ph / 60 Hz Motorized table adjustment Automatic brake for rapid stopping of the belts

DMC - 1350 RKP, ...TECHNOSAND 3-Head Wide Belt Sander.(3) Heads, 52" width cap. - Head sequence: Contact sanding roll and (2) Segmented platens Head Configuration:1st Head : 35 HP 9″ Spiral Drum2nd Head : 24 HP/30 HP dual RPM 7″ Spiral Drum/Combination Head W/Segmented Platen,3rd Head : 15 HP VFD driven multi-speed head with a Segmented Platen4th Station: Panel cleaning brush Specifications: -- 53" x 103" Long abrasive belts with electronic tracking on all wide belt heads. -- Turbo panel blowers, timed abrasive belt air cleaners. -- DMC "Hydra 35" control, "EPICS" control for sectional platens. -- (99) Programs; graphic screen for machine configuration, +/- control on segmented platens, abrasive belt cleaners. -- Sequential automatic start-up, machine troubleshooting and self-diagnosis. -- Variable feed speed from 15 - 60 FPM (4.5 - 18 MPM), 5 HP variable feed drive. -- Vacuum conveyor bed with 12 HP suction fan and motor.Equipped with & Features: -- Automatic conveyor belt tracking, infeed & outfeed holddown pinch rolls or shoes on all heads. -- 0" - 4" Motorized programmable thickness adjustment with LED readout. -- Automatic part thickness adjustment, infeed hand safety stop, outfeed emergency stop. -- Motor load meters and control console with monitor & keypad.NOTE: Sander has very low hours, less than 700. The "orange" screen is the OLD screen while the "blue" screen is the NEW screen that was replaced after the original video was made. Includes (4) spare platens.

SCM DMC TC 1350 RKP Wide Belt Sander ( 3 ) HeadsWidth cap. 53" , Drum, Combination Head, PlatenHead Configuration1st Head: 35 hp 9″ Spiral Drum2nd Head: 24 hp/30 hp dual RPM 7″ Spiral Drum/Combination Head W/Segmented Platen,3rd Head: 15 hp VFD driven multi speed Segmented Platen4th Station: Panel CleanerSpecifications -- 53″ working width, 656 hours of operation, --. Yes, it has (2) segmented platens. It’s from a custom shop and was utilized for very specific custom work and nothing else. -- 6.5″ thickness capacityEquipped with & Features -- Auto thickness calibration, -- Vacuum bed, -- 5 hp vfd controlled feed speed, and multiple modes. -- There is also a manual and (4) spare platens.Note: Only issue found , are lines on the LCD Screen (see pictures).

SCM Sandy 900-RRCS-135 Wide Belt Sander (3 ) HeadsWidth cap 53", Drum, Drum , PlatenHead Configuration:1st Head :Grooved Rubber Contact Drum 15 HP2nd Head: Grooved Rubber contact Drum 15 HP3rd Head: Superfinishing Unit: Provides uniform finish using a Chevron belt and an electronic pad, 15 HPSpecifications -- Working Width: 1,350 mm -- Min/Max Thickness to Be Machined (with Mobile Table) 4 - 170 mm; Min/Max Thickness to Be Machined (with Fixed Table): 4 - 200 mm -- Sanding Belt Width/Length: 1,370 & 2,620 mmEquipped with & Features: -- Chevron belt and an electronic pad, eye-S Control: allows easy and intuitive programming with an LCD display and touch-screen function. -- Unskilled Operator Friendly: Stores up to 120 work programs for commonly used machine settings.

Sandya 10 RRCS 130 wide belt sander 3-Head, 53" width cap, Drum, Drum, Combination HeadHead configuration1st Head: Contact roll, 7" dia., 35 HP motor;2nd Head: Rubber covered contact roll, 7" dia3rd Head: Combination head, rubber covered contact roll, 7" dia. and 2" wide finishing platen, 30 HP motor driving both headsSpecification -- 52" x 103" Abrasive belts -- Air eye tracking and pneumatic belt tensioning, --All heads with abrasive belt grit thickness adjustment, -- Conveyor belt feed with dual feed speed,Equipped with & Features -- Automatic part thickness adjustment. -- Motorized thickness opening via (4) precision conveyor bed jacks -- LED readout, -- 0" - 6-1/4" opening, --Infeed and outfeed spring loaded holddown shoes. -- Motor load meters; -- Infeed and outfeed conveyor roller extensions.

SCM M3 Dip Chain Gang Rip SawSpecifications: -- 300 mm (11.81") Width cap. -- 110 mm (4.33") Max. depth of cut. -- 8-3/4" Throat depth. -- 390 mm (15.35") Min. stock length. -- 200 - 350 mm (7.87" - 13.78") Blade diameter. -- Arbor dia. 70 mm (2.76"). -- Table size 750 x 1,530 x 750 mm H (29-1/2" x 60.24" x 29-1/2" H). -- Blade speed 4,200 RPM. -- Feed speeds 6 - 48 MPM (19 - 157 FPM).Equipped with: -- 44 kW (60 HP) - 3,554 RPM Blade motor. -- Variable speed drive feed chain motor. (2) Upper infeed & (2) Upper outfeed 4" Dia. rollers, Automatic chain lubrication. -- Top & bottom anti-kickback fingers. -- Main dust hood, with 200 mm (7.87") Dia. outlet. -- 40"; x 2-3/4"; H Adjustable infeed fence. -- Automatic lubrication. -- Motor load meter.Complete with: -- Spare Parts Catalog. -- Tooling (As pictured).NOTE: Machine is not available for pick-up until 11/1/24.

1998 SCM TECH 30 Super Router

SCM TOP 35 BORING MACHINE(35) Spindles on 32 mm centers, pivoting boring head, drills vertically from the top and horizontally from the rear,Specifications: -- 0° - 90° Motorized tilting of the head, can be locked at any angle between; max. panel width 1.280 mm. -- (2) 6 HP - 2,800 RPM Motor; quick boring depth setting with (6) depth stops on revolving turret, viscous damper for smooth drilling & through boring. -- Designed with: Lead screw w/veneer scale for head displacement setup.Complete with: -- Back fence w/flip stops, plus fence extension with (4) mechanical reference stops, (4) pneumatic hold-downs; 33" worktable height.

SCMI STARTECH/23 23-Spindle Construction Boring Machine.Specifications: -- Distance between spindles 32 mm (1.26"), Maximum drilling head distance 704 mm (27.72"), Maximum drilling depth 45 mm (1.77"). -- Panel thickness 10 - 75 mm (0.39" - 2.95"), Maximum panel width under bridge 1,000 mm (39.37"). -- Maximum panel size:270 mm(10.63") (with vertical head), 130 mm (5.12") (with horizontal head). -- Drilling head stroke 63 mm (2.48"), Tool diameter 5 - 10 mm (0.20" - 0.39"), Tool length 55 - 75 mm (2.17" - 2.95"). -- 26-1/4" x 40" x 33-1/2" H Table, 2.64 kW (3-1/2 HP) 3,390 RPM Motor.Equipped with: -- 23-Spindle Boring head (Aluminum alloy single block), Drills vertically from top & horizontally from rear. -- Manual tilt with Gas shock cylinder assist, Positive stop at 45° for boring at angle. -- 6-Position Turret depth stop. -- (2) 3" Diameter Air hold-down clamps, Foot pedal operated. -- Index pins for line boring, 15-1/4" L x 1-1/2" H Side fences.Complete with: Operation & Maintenance Manual & SHOP FOX Mobile Base with Swivel Casters. -- Dimensions: 58" x 48" x 46" H. Weight: 1,100 Lbs.

20" (520 mm) Width cap.7,5 HP (5,5 kW) main motor ÷4-knife cutterhead÷1/8" to 9-1/2" (3 - 240 mm) ÷motorized opening mechanical scale for bed position max. depth of cut 5/16"÷10" min. length of workpiece ÷(4) feed speeds at 18/30/39/51 FPM (6/10/13/17 m/min.)÷table size 20-3/4" x 33-1/4". ÷Includes: Knife sharpening attachment ÷ Equipped with: Chip-breaker, sectional grooved infeed & solid outfeed roller.

SCM S 630 Planer with Tersa HeadSpecifications: -- 24" Width cap.; 12 HP main motor, 2 HP feed motor; 4-3/4" dia. with reversable TERSA Head rotates @ 4,500 RPM; -- 1/8" - 11-3/4" Thickness opening via motorized bed with LED readout for fine adjustment. -- Max. depth of cut 5/16"; 10" min. length of workpiece; variable infeed speed from 20 - 56 FPM.Equipped with: -- 20-3/4" x 39" Cast iron table, sectional chip breaker, sectional grooved infeed & solid outfeed rollers, adjustable bed rollers.Complete with: -- Magnetic starter and dust hood w/6" dia. dust outlet.

SCM OLIMPIC K208ER EDGEBANDER WITH CORNER ROUNDING15/32" (12 mm) Max. edge cap., 2" max. (w/corner rounding only 1-3/4") banding height, 2-3/8" min. panel width and 6-5/16" min. length.Equipped with: -- Automatic strip & coil feed magazine w/Heavy Duty 3 mm PVC cap. guillotine. -- Teflon coated glue pot with glue roller application system complete w/automatic recycling device for unused glue. -- Digital thermostat adjustment for temperature control. -- 3-roll pressure unit w/pneumatic controls for all pressure rollers.Workstations: -- Double motor front & rear end trim (0.4 HP - 12,000 RPM motor ea.), tilts 0° - 15°, end trimmers mounted on 45° THK guide. -- Top & bottom fine/radius trimmer w/pneumatic positioning from control panel. -- Corner rounding units for leading & trailing edges. (2) 0.5 HP - 200 Cy Motors ea. -- Top & bottom PVC scraper for up to 5 mm radius. -- Top & bottom buffing unit (0.33 HP - 2,800 RPM motors). -- Hot air heating unit for PVC/ABS. -- Single 42 FPM fixed feed speed, 1 HP drive; heavy 3/4" drive chain with chain pads traveling on round & flat tracks.Complete with: -- Microprocessor for line control & glue temperature (can store up to 50 preset programs), swiveling control panel, pneumatic positioning of super finish, full cover sound enclosure, 200 Cy - 5 kW frequency inverter w/automatic motor brakes for all HF motors; includes used tooling. NOTE: Video of equipment was made in February 2021, prior to being decommissioned and placed in storage fully wrapped and ready for transport.

SCM P-170 Feed Through Moulder5-Head, 6-5/8" x 4-3/4" capacity. Specifications: -- Head sequence: Bottom 6.5 HP, right 6.5, left 6.5 HP, top 9 HP, Universal 9 HP motor; -- 1-13/16" Dia. spindles at 6,000 RPM, spindles equipped with high cap. precision bearings, all set-up adjustments on front side of machine. -- 15 - 85 FPM Feed speed, 3.6 HP Cardan (chainless) feed drive, motorized feed beam with air-loaded feed wheels.Complete with: -- 84" Long infeed table with quick lever thickness adjustment for stock removal, manual Waxilit bed lubrication. -- Note: No cutterheads or tooling included.

SCM - OLIMPIC K 201 HFA, ...Automatic Compact Edgebander with: 3 mm Max. coiled edgebanding thickness & High Frequency motorsSpecifications: -- Edgebanding thickness cap. (for both coil & strip): 0.4 - 3 mm (0.02" - 0.19"). -- Min. panel length for coiled edges (min. width 200 mm) 140 mm (5.51"). -- Min. panel width for coiled edges: 65 mm (2.56"). -- Panel thickness: 8 - 40 mm (0.31" - 1.57"). -- Feed speed:9 MPM (29 FPM).Equipped with: -- Automatic adjustment of all units when panel thickness is changed. -- 20" Dia. coil table. -- Automatic coil feed magazine; manual strip feed. -- Teflon-coated glue pot. -- 1.2 mm (0.05") Cap. guillotine. -- Eye-level control with: GEFRAN "1000" LED Temperature controller. -- Adjustable feet.Workstations: -- Single-motor end trimming unit with: (1) 0.19 kW (1/4 HP) - 12,000 RPM High-frequency motor & copying device. -- Top & bottom flush trimming unit with: (2) 0.35 kW (1/2 HP) - 12,000 RPM high-frequency motors, and front & vertical copying devices.

SCM - K400 E, ...EdgebanderEdge cap.: 0.4 - 6 mm (0.016 to 1/4") For strip feeding. -- Panel cap.: Min. width 65 mm (2-3/8"); min. length: 140 mm (5-1/2"); panel thickness min./max.: 8 - 60 mm (3/8" - 2-1/2").Equipped with: -- Automatic strip & coil feed magazine; Teflon coated glue pot (heat up time: 10 Min). -- 3 mm Cap. guillotine; 3-roll pressure unit. -- "StarTouch" control system with: Large 12" screen; graphic display with one touch; memory capacity up to (60) working programs. -- Workstations -- Double-motor front & rear end trim; "K-2" mounted on THK guides (0.4 HP - 12,000 RPM); tilts 0° - 15°; rapid set up between straight and angled cutting with the automatic tilting device. -- Top & Bottom flush & bevel trims: "RI/800"; 0.7 HP - 12.000 RPM; bevels 0° - 15° with precision digital indicators for quick set up. -- Top & Bottom "RAS/V" scraping unit: Container with filter for long chips. -- Top & Bottom buffing unit: 1/4 HP - 2,800 RPM. -- Fixed feed speed: 36 FPM; 3/4 HP feed drive.Complete with: -- Full cover sound enclosure; mechanical digital readouts for setup adjustments; frequency inverter and outboard panel support. -- Actual Model: OLIMPIC K 400 E