Equipment For Sale
10591 Results Found
Tyrone Berry SN: A2850, Model:SMA-225, spool of 3/4" steel cable, 60hp electric motor, hyd tank, good working condition
Tyrone-Berry feed, SMA-285 carriage feed, includes cable drum and hyd unit, good working condition
Call for Price
UAS FJH8-2 DUST HOG Cartridge Dust Collector with Rotary Air Lock. Approx. 3,500 CFM Cartridge Filter System, complete with capacity of 1,808 sq. ft. of filter area composed of (8) cylindrical cartridges (226 sq. ft. cloth area per cartridge), CFM based on a target 2:1 Air to Cloth Ratio.. -- Automatic Pulse Clean System with differential pressure gauge and sequencing timer board in enclosure. Continuous pulse jet cleaning via compressed air, (1) pulse valve per (2) cartridges. -- Includes: Bottom hopper ROTOLOK 8" Rotary Air Lock (not mounted and to be adapted). steel support legs. -- Features: Heavy Duty steel legs which can be extended for position a storage container below RAL's. -- Comes with: CINCINNATI 150 BI t0 HP side mounted direct drive fan motor which pulls dust laden air thru the collector (clean air side); Baghouse has dusty air inlet at the top of hopper and clean air discharge from fan. -- Price includes dismantling and loading on flatbed truck.
Call for Price
UKIAH TAE 6”x30” Thin Kerf gang edger w/(2) 150 hp arbor drive motors, US 20 hp motor to TIGEAR 11.40:1 reducer, knurled & hold down rolls, UKIAH & ALEMITE lube system, clamshell opening Serial# WS-10-6-85 6" Splined Arbor.
$ 26,500
UKIAH 8" x 66" wide gang saw. (8) 6" knurled and chromed bottom feed rolls, 2-15/16" shafts; (3) 8" knurled & chromed top feed rolls, 2-15/16" shafts, powered; 1-1/4" thick side plates; Rex ZBR type bearings; all sprockets in good condition; 3-15/16" outboard bearings and floored platform for drive; attached to main arbor by extra heavy duty universal joint system; door on right; drive system on left; clam-shell opening with both cylinders; (2) 10 HP motors for 2 speed drive system; approximate base size 9'6" x 12'6"; no infeed or outfeed or main electric motors. $26,500 OBO.
$ 26,500
UKIAH 8" x 66" wide gang saw. (8) 6" knurled and chromed bottom feed rolls, 2-15/16" shafts; (3) 8" knurled & chromed top feed rolls, 2-15/16" shafts, powered; 1-1/4" thick side plates; Rex ZBR type bearings; all sprockets in good condition; 3-15/16" outboard bearings and floored platform for drive; attached to main arbor by extra heavy duty universal joint system; door on right; drive system on left; clam-shell opening with both cylinders; (2) 10 HP motors for 2 speed drive system; approximate base size 9'6" x 12'6"; no infeed or outfeed or main electric motors. $26,500 OBO.
$ 239,900
ULTRA GL-630H Feed Through Moulder: 6-Head (B-T-R/L-T-B), "Flooring" working capacity of 12" x 6".Specifications: -- Head sequence: Bottom 25 HP, top 30 HP, right 20 HP/left 20 HP (opposing), top 25 HP, and bottom 25 HP motor. -- Spindle dia. of 1-13/16" with cutterhead speed of 6,000 RPM; all spindles with high prevision bearings. -- Auto. positioning of the left & top spindles radially; all additional spindles with digital readouts, including chipbreaker & pressure elements. -- Pneumatics on all chipbreakers, pressure elements, and holddown rollers. -- Horizontal spindles with HydroLock outboard bearings on #1, #2, #5 & #6. -- Straight jointer on spindles #5 & #6; Profile Jointers on spindles #3, #4, #5 & #6. Equipped with: -- Inverter controlled feed drive, variable speed of 26 - 260 FPM. -- Infeed table 1.2 M (4') with all table plates & fences hard chromed to RC 70. -- Machine table includes: (5) Table rollers for smooth through feed; short stick attachment for through feed on pieces down to 230 mm. -- Electrical cabinet & pedestal for machine controls separate from machine, Heavy Duty sound enclosure. -- Includes Startup training and Warranty!
UMP BP 450 A 450 kg/hr. Briquette PressSpecifications: -- Cap. 450 kg/hr. (992 Lbs.). -- Max. pressure 1,700 kg/cm³ (24,175 PSI). -- Max. chip moisture content 15%. -- Max. chip size 15 mm (0.59"). -- Wood shaving to briquette ratio 10 to 1 (using mahogany). -- Briquette configuration: Rectangular. -- Briquette length 40 - 105 mm (1.57" - 4.13"), Briquette width 150 mm (5.91"), Briquette height 60 mm (2.36"). -- Briquette heat energy 4,200 kcal/kg (7,558 BTU/Lbs.). -- Hopper size 31"; x 36"; x 36";, with 1 side sloping so cutaway from cube of 18"; x 36";, Mounting flange at top allows additional capacity to be added).Equipped with: -- Automatic material density adjustment. -- Automatic hopper shutoff. -- SIEMENS PLC Control.
Call for Price
Call for Price
3 Identical Scissor Lifts UNI-CRAFT CORP. #HOMAG-60X120-6533-1 3 phase and single phase Excellent Condition $7,000.00 each Call 800-459-2148 for more info.
Call for Price
UNIQUE 310-40 1-1/4" Double-Sided End Cope ShaperSpecifications: -- Max. length 40", Max. width 6", Max. thickness 1". -- Table size 13"; x 42-1/2"; x 37-1/4"; H, Table travel 14-1/2";. -- Spindle dia. 1-1/4". Equipped with: -- (2) 5 HP - 3,450 RPM TEFC Motors, Counter-rotating spindles. -- Pneumatic hold-downs, Foot pedal control. -- 39-1/4"; L x 1/2"; H Fence.
Call for Price
The Model 313 Features An Automatic Cycle With Dowel Drilling For Accurate Alignment Of Mitered Corners. Highly Visible Guards, Hands-Free Foot Valve Achieve Accurate Clamping, And Dual Hand Actuated Start Buttons Make This Machine Both Easy And Safe To Operate. Tested, the Unique Finger Joint Provides The Strongest Joint On The Market. -- 5HP Belt-Drive Motors -- 1" Material Thickness Capacity -- Compressed Air Requirements: 90PSI - 1 CFM -- Dust Collection: (2) 5" Diameter 1400CFM -- Work Height 3' -- Footprint 85" Width x 46" Depth -- Excellent condition, regularly maintained, cleaned, checked and serviced, perfect operational, ready for work.
$ 7,250
UNIQUE 310 Automatic Cope Shaper; Copes multiple workpieces up to 6" wide x 24" long in only (1) pass, quickly and accurately. -- Equipped with: (2) 5 HP motors with magnetic starter; (2) 1-1/4" dia. counter-rotating cutterheads eliminate tear-out on detail edge of cope/tenon cuts. -- Pneumatic safety clamps hold work in place until sliding table is returned to its forward position.