Equipment For Sale

BRANDT - F-13, ...Top & Bottom TrimmerFor simultaneous top & bottom flush/radius trimming of the oversized edgeband on straight & shaped workpieces with inside-and-outside radii.Specifications: -- Top & Bottom edge trim PVC, HPL, and veneer edgings; up to 3 mm max. thickness. -- Manually operated; 1/2" - 2-1/4" panel thickness; 1-3/8" min. inside radius. -- Features: Independent top & bottom trim heads (0.5 HP - 11,800 RPM motor each). -- Built-in air jet blowoff device; 31" x 48" table size; dual foot pedal control.NOTE: Intermittent fault in the Control Panel, which will require replacement.

BRANDT - KDN 520, ...Edgebander0.4 - 8 mm (5/16") Edge cap.; panel thickness 15/32" - 2-5/32"; min. panel length 160 mm (6-3/8"); 65 mm (2-1/2") min. width; line control (NO limit switches) for workstation function. Automatic height adjustment with: Top pressure beam for all workstations; equipped with digital height indicator.Specifications: -- PC-16 Program Control; 7-1/2" VGA screen 8 MB IDE flash disk; 8 MB RAM; internal modem for remote diagnostic link; signal infeed light to insure proper spacing between panels.Equipped with: -- Quick heat-up glue system (approx. 12 Min); glue tank for maintenance & glue color change. - Glue temperature indicator for both the glue pot and glue roller with: LED Thermostat and automatic temperature reduction if the machine is idle for (15) Min or more. -- Glue applicator roller is reversible and retractable from the fence line. -- Automatic magazine for strip & coil (large coil table 800 mm dia. to accommodate large coils of 3 mm PVC) stock; 3 mm PVC guillotine; (1) drive plus (1) split secondary roller "pneumatically controlled" pressure sections.Workstations: -- Double-end trim (0.33 HP - 12,000 RPM motor); chamfers 0° - 15° via programmable controller. -- Top & bottom flush/radius trim; bevels 0° - 15° (0.5 HP - 12,000 RPM motors). -- Top & bottom scraping for 3 mm radius; pneumatically controlled indexing system. -- Top & bottom buffing (0.25 HP - 2,800 motors).Features: -- End trim & flush trim stations: HF Motors w/electronic brakes; feed chain track speed 36 FPM; 2 HP feed drive. --Complete with: Operator Control Panel with: PLC (Programmable Logic Control) keypad & LED readouts; used tooling. -- Machine in use and available time to be confirmed.

Brandt KF 76F Edgebander: Pre-milling, top/bottom trim, buffing, extra glue pot

Brett Inc. Bolter Saw - We can Motor it or Buy W/O Motor

Brewco B-1600 16" x 16" with Full Run Around System & 5 Way Seperator S/N BBK0489

Brewco Big Band B-1620 Grade resaw with with Cab and Full Runaround System.

Brewco B1600 Grade Resaw System 5-Way Board Separator Ready to load!

Brewco Soft Ride Unscrambler S/N SRUJ0115

4x6 Speed Cut

Brewco EZ-Cut Single Head Band Resaw 6" Belt 15HP Motor 230/460 Volt S/N BE 3-20

Brewco B1600 Grade Resaw System: Complete run around, board separator, conveyors Brewco Edger: (2) 10 hp motors, (2) 16” saws , 4” to 24” wide capacity , 4” thick capacity Removed from service on 6/17/24 and ready to load.

This system is no longer needed at the current facility. Ready for immediate removal! - Brewco Wolf Resaw - 4" Blade; 20'4" Long - 40" Bandwheels - 40 HP Main Motor - 10 HP Hydraulic Feed - McDonough Style Guides - Some spare blades - Head moves up/down, not the bed - Approximate dimensions: 9'L x 10'W x 6'H - Also available separately: - 8' Infeed Belt - 16' Outfeed Rollcase

Brewco 2 Head resaw Was in production until mid January Works great More photos coming soon

BREWCO 6 Head Horizontal Resaw - includes return conveyor. Visit https://benjones.com/shop/102007/ for more information

Brewco B-1600 Wolf with Full Run Around System. S/N

SN: GEG11827, Model: B1600, 16" x 16' capacity, infeed web was new in Feb., 50 hp electric on saw, 50 hp electron on hydraulic unit, 1 3/4" x 40" bandwheels with oil bath hubs, 2" x 20'4" bands, air band tensioner, hydraulic powered press down roll, runaround has all decks and rollcases, including 5 way board splitter, operators cab with computer setworks and all controls needed, 8 presets for thickness, automated infeed speed control by size of log, has all photo eye sensors needed, lots of extra parts, all electrical and hydraulic hoses were labeled during disassembly for easy setup, includes electric motor starters, taken out of production in June of 2023.

Brewco 4-Head Resaw Seller has a hydraulic unit to go with the machine. No controls. Optional: System can be cleaned up and controls added PER SELLER: this machine is able to pass 7.75" cants it was purchased in Nelson BC 20 years ago it has not run since it is ready to go but has only on off switches and no motor starters per se I have not pulled the machine out to clean and paint and get ready to move it needs cleaned/ painted/ starters for 4-20hp motors/ small hyd unit for feed belt and feed rolls nice machine, I have not operated it but was running when I bought it and has been under cover since will need 5 starters, and a small hyd unit 5 hp, which i can provide this machine is easy to get ready if we have a commitment

BREWCO 44" X 8' 2 STRAND TURN AROUND W/10" POWER ROLL CASE ON EACH END

Brewco 2 head resaw with complete run-around system, electric/ hyd powered, good working condition

Brewco Band Saw Swage