Equipment For Sale

2000 VALMET 646F DOUBLE BUNK FORWARDER 4 CYL CUMMINS POWERSHIFT JOYSTICK CONTROLS SQUIRT BOOM BYPASS BUCKET 700 HOURS ON NEW MOTOR

(3) Good used bogie axle beams for a Valmet 546 series 2. $800 each. GAF 05 1

2005 Valmet 911.3, 15,602 hrs., SISU 74ETA Engine w/2 spd hydrostat trans., Webasto pre heater, Rear Tires 700-55-34 / Fronts 700-55-26.5, all tires roughly 60%, 370.2 harvesting head, paint, guards, glass, doors, windows, mirrors all in good shape, $39,500

Like New Ryans Dangle Head Model 3550 400 Hours Dual Brake System 18.5K Frame Hours 8200H on 6.7 Cummings 70% U/C Heat/AC

Valmet 415 EX parts available

Hands-down, no question, the cleanest Valmet 425EX on the market! 4500 hours, meticulous owner with no expense spared in upkeep and maintenance on this machine. Only 1800 hrs on an upgraded 300 hp 8.3 Cummins. Dry, tight and no disappointments. Equipped with a Quadco 22B 360

Good used front rear end center differential for a Valmet 546 series 2 forwarder.

2005 Timbco 425 EXL , 8.3 Cummins Engine-260 hp, many recent updates. Can be equipped with Barsaw Or hotsaw. Getting an updated undercarriage.

Valmet/Timbco 415EX complete bottom- track frame, track groups, rotary manifold, final drives, drive motors, and more

1994 Valmet 544X Woodstar Series II Forwarder, Single Bunk, NEW ENGINE, Frame hours are 14,700. Center Section is Tight Enclosed Cab with Heat, No Air Conditioning, Bunk Length is 11' Will handle up to 16' Lengths, New Lexan Glass, 12 Speed Transmission, Has Used Transmission Installed Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Valmet 425EXL Feller Buncher, Valves Resealed, Fresh Undercarriage, Enclosed Cab with Heat and Air Conditioning, 28" Pads, Has Quadco 22" Sawhead with 360 Degree Swivel, Leveling Cab, More Pictures Coming Soon, Ready for the Woods. Operating weight: 54,002.3 lb Shipping length: 14.57 ft Height to top of cab: 12.34 ft Width: 10 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1997 VALMET 544X SINGLE BUNK FORWARDER 4 CYL FORD POWERSHIFT LEVER CONTROLS BYPASS BUCKET DOES HAVE WEAK TRANSMISSION

1986 Valon Kone 22" Ring Debarker with Hydraulic feed rollers

Valone Cone 22" Ring Debarker

Valone Kone ring debarker, electric drive, includes infeed/outfeed, working condition

VALTORTA FV-P Stain Roll Coater51" Width cap., single head roll coater 1.5 HP variable conveyor speed 80 - 100 FPM.

The Vantec Wood Wast Drum Chipper is used to produce chips from logs and veneer waste. It has a roller infeed system, rubber conveyor belt and hydro-pneumatic unit to lift the rotor for maintenance. Manufacturer specs: - Width of inlet: 600 mm; - Height: 200 mm; - Rotor diameter: 600 mm; - Toothed roller: 01 upper and 02 - lower; - Grooved rollers: 01; - Rollers gear motor: GD (helical - gears); - Upper Rollers motor size: 5 hp; - Upper Rollers motor size: 5 hp; - Feed speed: 40m/min; - Number of rotor knives: 02; - Wood chip size: 30 - 40 mm; - Chipper screen: size: 65 x 65mm - Main motor 100 hp 4P: Included; Drive panel: Included; - Estimated production: 38 m3 / h (it may vary according to the type of material and time used with blade sharpening); - Infeed conveyor length: 3 500 mm (included); - Width: 1 650 mm; - Height: 1 .000 mm; - Overall length: 5800 mm; Approximate weight: 2,900 kg.

This Wood Drum chipper PT750 is used in production of wood chips from logs and veneer waste. It has a toothed roller system that allows efficient material infeed, rubberized conveyor belt and Hydropneumatic unit to lift the rotor cover for maintenance. It comes with 01 chipper Knife set and 01 nose bar set. It does not come with the output conveyor. Width of inlet: 750 mm; • Height: 300 mm; • Rotor diameter: 800 mm; • Toothed roller: 03 upper and 03 lower; • Grooved rollers: 01; • Rollers gear motor: GD (helical gears); • Upper Rollers motor size: 7,5 hp (2x); • Feed speed: 35 m/min; • Number of rotor knives: 02; • Wood chip size: 25 - 40 mm; • Chipper screen: size: 70x 70mm; • Main motor 200 hp 4P: Included; • Drive panel: Included; • Estimated production: 65 m3 / h (it may vary according to the type of material and time used with blade sharpening); • Lead Time: 240 Days • Infeed conveyor length: 3 500 mm (included); • Width: 2 500 mm; • Height: 1.250 mm; • Overall length: 7 300 mm; • Approximate weight: 8 750 kg.

This Drum chipper is used in production of wood chips from logs and wood residues (slabs, board off cuts, veneer waste). It has a toothed driven roller system that allows an efficient infeed of the material, rotor with interchangeable thread locks and with a disposable steel plate in the front of the rotor, hydraulic nose-bar/anvil extractor, infeed conveyor with rubberized belt and hydro-pneumatic unit to lift the chipper/rotor lid. (maintenance). It comes with 01 set of blades and 01 nose-bar/anvil. Does not come with outlet conveyor. - Inlet width: 1000 mm; - Nominal chip size: 23 - 30 mm; - Inlet Height: 450 mm; - Main Motor indicated: 300 hp 4P (2x); - Rotor diameter: Ø 1000 mm; - Soft starter drive panel; - Shaft diameter: Ø 220mm; - Metal detector; - Toothed roller: 03 upper and 03 lower; - Estimated production: 130 m3/ h; (may vary according to the type of wood and the sharpening period of the knives); - Roller diameter: Ø 353mm; - Diameter of roller shafts: Ø 100mm; - Chipper Screen: 65 x 65mm; - Grooved roller: 01; - Infeed conveyor length: 5000mm (included); • Driven roller gearmotor: (helical gears); - Width: 3 500 mm; - Driven rollers motor: 15 hp (2x); - Height: 2 100 mm; - Main motor belt: Torque-Team; - Total length: 10 500 mm; - Inlet conveyor speed: 40 mL / min; - Approximate weight: 22 700 kg; - Number of rotor blades: 03;

SFVG1200 twin vertical Band Saw 1200mm wheel blade size. Machine used for the log break down process in continuous flow sawmill layouts. Capacity to process logs up to 500mm in diameter and 3.000mm long. This machine is fitted with main motor, motor drive panel, servo motor thickness selection, adjustable saw guides, slabs pneumatic side pressers, special chain and hydropneumatic tensioning system to tension the Band saw. - Wheel blade width: 6”; - Minimum log Length: 1200mm; - Standard maximum log length: 3000mm - Minimum diameter: 120mm; - Maximum log diameter: 500mm; - Saw cut width: 70 to 300mm; - 4 set of pneumatic side pressing rollers for side boards; - Motor size: 2 x 75CV 4P 50hz (INCLUDED) - Drive Panel Included; - Central chain motor size: 7,5 HP 4P; - Linear Cutting speed: 30m/s; - Feed speed capacity: 48m/min; - Saw Blades are not included. - Infeed conveyor length: 4.000 mm included; - Outfeed conveyor length: 6.000 mm included; - Machine width: 5.000 mm; - Machine overall Length: 12.000mm - Servo motor thickness setting system (INCLUDED); - Approximate weight: 15.000 kg;