Biomass Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 16 of 32
635 Results Found
Sort By 
Recently Added Items
2023 Diamond Z 1463B
$1,275,000
2023 Diamond Z 1463B
2017 Diamond Z 1463B
$825,000
2017 Diamond Z 1463B
2014 Peterson 4310B
$195,000
2014 Peterson 4310B
Unknown
Call For Price
Unknown
Call for Price

MOLLERS HSA Automatic Stretch Hooding System with Corner Board ApplicatorSpecifications: -- Max. pallet size: 48" x 48" x 120" -- Capacity: up to 120 units per hour (depending on load height and length) -- Main motor: 5 HP -- Corner board system: -- Automates the process of placing 4 corner boards. -- Each corner board magazine can hold up to 30 corner boards. -- Carousel design, servo driven corner board applicator allows for precise positioning during corner board retrieval and for proper staging.Features: -- Fully automatic -- Tubular film is automatically fed and stretched over the load -- Handles a variety of load heights automaticallyApplications include: -- Pallets of smooth boxes or uneven containers that need to be secured on a pallet -- Cereal / grain based products -- Chemical / industrial -- Prepared / convenience foods -- Household goods -- Snack foods

Mark Joel
800-374-5009 ext:355
Call

Call for Price

In good condition. Has 50” opening. No drive motor but would take 100-200HP depending on material being run. No screen included. Very heavy weighs approximately 4 ton.

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Jacobson Swing Hammer Mill, Top Infeed, Bottom Discharge, 75HP Electric Motor.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Montgomery Blo Hog S/N 781 ER18" HDGM Drop Feed w/75HP Motor

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 120,000

Mobark 1400 Tub Grinder, used for municipal waste only, in very good condition, turn key operation. $120,000

T & L Equipment Sales
570-889-3636
Call

$ 28,000

2016 Morbark Beever M12D 1,237 Hours Auto Feed 89hp Power Solutions International (PSI) 3.0L gas motor TorqMax Feed Wheel Compression System Hydraulic Lift Yoke Cylinder 53" Folding Feed Table 18" x 12" Throat Capacity Fully serviced with new fluids, filters, tires, wheels, knives, battery and rain cap 360 Degree Rotating Adjustable Chute LED lights

Mitch Stevens
828-773-6986
Call

$ 47,900

1992 Morbark Model 27 Whole Tree Chipper Cat V12 800 HP Engine Currently in production PRICE REDUCED

Mitch Stevens
828-773-6986
Call

$ 245,000

2006 Morbark 6600 HG Rebuilt CAT 1000 Hp engine Approx 2100 hours Magnet Great for processing pallets, brush, green waste & more

Mitch Stevens
828-773-6986
Call

$ 79,000

MORBARK 27RXL WHOLE TREE CHIPPER BAD MOTOR V-12 CAT LOTS OF NEW PARTS DISC SHAFT BEARINGS DECK CHAIN AND SPROCKETS JUST WENT THRU CHIPPER AND MOTOR THREW A ROD LOTS OF NEW PARTS JUST NEEDS MOTOR

 Manton, MI
Lutke Equipment LLC
231-824-9505
Call

$ 139,000

2002 MORBARK 30RXL WHOLE TREE CHIPPER ENCLOSED CAB WITH HEAT AND AIR CAT V-12 MORLIFT 1000 BOOM READY TO GO

 Manton, MI
Lutke Equipment LLC
231-824-9505
Call

$ 65,500

2008 MORBARK TYPHOON 20 CHIPPER -400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back

Keith Comeau
704-929-9122
Call

$ 219,000

MLS Number 1142424 2010 Morbark 5500 Flail Debarker 4260 run time hours and 2717 idle hours 600 HP John Deere Tier III engine Reversing fan 3 Flail-Drum Build date 5/12/10; Delivered new 12/12/12 Infeed opening 23" x 55" Discharge system = 72" wide by 24" long dual folding drag chain conveyor 285 gallon fuel tank; 360 gallon oil tank. Remote control Remote tether Standalone machine 66,500 lbs. Very well maintained Good working condition. Parts/owner and engine manuals

Mike Stuck
828-773-2204
Call

Call for Price

Morbark 30-36 Portable Chipper 350HP Cummins Approx 4000 Hrs self Feeding Grapple Up to 18" Dia Material

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 562,500

2018 Morbark 3400XT Wood Hog Horizontal Grinder CAT C18, 765 Hp engine Approx 2100 hours New belly belt/skirting; Rebuilt mill Engine has new cylinder sleeves with rod & main bearings, purge pump & hydraulic fan motor (replaced by manufacturer due to a defect) Remote Magnet 1” & 5” screens Great machine and ready to go to work

Mitch Stevens
828-773-6986
Call

$ 74,900

1992 MORBARK 30RXL WHOLE TREE CHIPPER ENGINE 3412 860HP STARTS AND RUNS GOOD 3 KNIFE, GOOD PADDLES, GOOD FACE PLATE, FEED DECK CHAIN NEED WORK CHIPPER IS WORKING EVERYDAY FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

Call for Price

1994 Morbark 23 WCL Whole Tree Chipper Engine is a 3412, Seperator, Enclosed Fold Down Cab with Heat, 6 Sets of Knives and New Anvil, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Albany, NY
NEF Equipment
855-251-2648
Call

Call for Price

1996 Morbark Model 20 Whole Tree Chipper ,Caterpillar 425 HP Engine, Enclosed Cab with Heat and AC, Needs a Condenser for the AC, Machine has Separator ,Ready for the Woods... Overall Length 21’6” Overall Width 8’0” Overall Height 13’6” Weight 10,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Albany, NY
NEF Equipment
855-251-2648
Call

$ 925,000

2021 Morbark 6400XT Track Horizontal Grinder C32 Cat diesel with 1890 hours, Cat platinum warranty 5 years or 8000 hours. 42" x 61 3/8" Hammermill System w/ 28" diamter rotor and 1" thick rotor plates 40" diameter feed roll Dust Suppression System Hydraulically operated debris containment door Rod Puller 325L GD CAT undercarriage with double grouser pads, Ready to Grind… Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Dallas, TX
NEF Equipment
855-251-2648
Call

$ 200,000

1992 Morbark 1200 Tub Grinder -10500 hours - 1200 cat 3412 twin turbo 650hp -Mill completely rebuilt and new bearings with 200 hours on it ($33k in repairs) -Replaced turbo pedestal and rebuilt turbos -Entire mill was replaced new with new bearings -Hours are a guess meter says under 1000 I believe so I’m guessing it rolled -Hydraulic cylinders were rebuilt on boom except for squeeze cylinder on grapple -The turn motor on grapple leaks a little -One of the stiff leg cylinders bleeds down for unhooking from truck Ready to grind

Josh Digirolamo
828-302-7264
Call

$ 775,000

2021 Morbark Woodhog 6400xt -3800 hrs -C32 engine -New infeed chains -New infeed floor -New bit holders, racks, rotor pins -Solid grinder ready for work

Josh Digirolamo
828-302-7264
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved