Biomass Equipment For Sale

1991 Powerscreen Trommel Screen, 1/2 screens. Powerscreen’s industry leading trommel screens are extremely efficient in separating soil, compost, waste, aggregates, C&D, wood chips, and other materials. The rotating drum allows for tumbling for optimal separation of difficult material along with aeration. Easy drum changes, radial stacking conveyors, rugged components, and support from Powerscreen’s experienced service network make these trommels a versatile and reliable solution. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Powerscreen Warrior 1800 -735 hours -2 Deck -Belts good -UC is good -No leaks

2001 Powerscreen 725 Trommel Screen, Equipped with Remaned Deutz 100 HP Turbo Diesel, 1000 Hours, Used 1/2" Screen Cloth, New Sticky Belts, All New Brushes, New Tires, All New Radial Stacker Motor, Ready for Work. Weight 55,116 lb Transport length 638" Transport width 108" Transport height 158" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Powerscreen Chieftain 1400 -1900 hours -2 deck vibratory box -Up to 400 tph -54,895lbs whole system -Tier 4 engine (110H.P) -3 Conveyors Main,Tail(fine),Side(midsize/oversize) -Belts in good shape -Clean ready to work unit

The seller has confirmed that this 96" Precision chipper is in good working/running condition and is ready to load. This was not heavily run. This came out of a chip plant in WA. Model 96.27 - Horizontal feed - Side discharge - 4-Knife whole log chipper - 8" thick chipper dissc - Built in disc brake - Extended front shaft for hydraulic starter - Hydraulic starting motor - Side discharge pipe with motorized outlet adjustment - 27" maximum log diameter - Many spare parts and knives included - Average production rate: 125 tons per hour - No hydraulic pump - No motor - an 800HP one can be added for additional cost though... The photo's show the optional extended shaft and hydraulic starting motor which is a special feature....

Precision 58" Chipper - Model 58-60-16 6 Knife 150 HP Motor

Complete chip plant includes: - The infeed is 12’ above ground level. They were feeding it one log at a time with a shovel. - There is a single chain 12” wide leading to the debarker. - The debarker is a Salem 20” ring debarker with mcdiarmond controls. - From the debarker it goes through I think is a metal detector. It’s is enclosed, 8’ long with a belt conveyor. - 75’ of 3-strand chain that reduces to 2-strand chain for 35’ then goes to another 2-strand chain for 12’ then goes into the chipper. - The chipper is a Precision with 2- 400 hp high efficiency 3 phase motors. - From the chipper the chips drop onto a 42”x50’ inclined belt that leads to the 2 deck screen. The screen is 92”x20’ - The waste goes on a 9”x20’ incline belt and dropped into a truck. - The chips go out on a 3-strand 100’ conveyor (strands are 14” wide) to a radial stacker for loading trucks. The stacker belt is 42”x65’ - Chips can be redirected to blower unit system that will transport them to a rail siding to so they can be loaded into a rail area. It starts out with 75’ of 12” pipe running on the ground. Then it sweeps straight up to a height of about 24’ and goes 150’ to a siding across the county road. The chip loading facility is intact. - The hog is located back by where the logs are loaded onto the chain going to debarker. Here’s a list of the conveyors going back to the Kockums hog. It has a 24”x36” opening at the top. - Conveyors: 12”x100’, 12”x 25’, 12”x60’. All of these conveyors are 1 strand steel.

2001 PRECISION HUSKY PROGRIND 1000 TUB GRINDER REDUCED 275 HP New Fixed Teeth New Auger Motors Good Tires Runs Well

1996 Precision Whole Tree Chipper 21" Capacity 700 HP Cummins KTA Twin Turbo Needs Clutch AC Heat Good Feed Rollers Disc Wheel Completely Rebuilt New Anvil New Wire Plate Husky 235 Loader 52" Rotobec Grapple PRICE REDUCED

Precision Husky 23 Chipper Needs engine Has Cummins KT19 650HP

PREMIER TECH VP-415 High-Speed Four-Station Compression BaggerFinished Bag/Bale Dimensions 16" wide x 9" deep x adjustable lengthSpecifications: -- Speed: up to 6.5 bales per minute -- Bulk materials: fibrous, flake -- Bag types: gusseted flat bottom bale, tubular film ÷ ÷Bag materials: polyethylene with anti-static treatment -- Bag weight: from 5 to 50 kg (11 to 110 Lbs) -- Typical footprint: 319"; L x 254"; W x 204 to 242"; H (8100 x 6450 mm x 5180 to 6147mm) -- Bag film thickness: 3.5 to 8 mils (90 μm to 200 μm) -- Empty bale dimensions: 12 to 39" L x 14 to 18.5" W (305 to 990 x 355 to 470 mm) -- Compression ratio: 5 : 1

Premier Tech Stretch Hooder / Pallet Wrapping SystemRobust load securing --Creates highly stable pallets --Handles all types of loads --Suited for high-speed production lines --Requires minimal maintenance --Hoods up to 100 loads per hourLate model 2020Includes Conveyors and electrical cabinets

Premier Tech EM600 4-Stage Bagger Bag Sealer Bag Placer Hydraulic Unit Infeed auger

Premier Tech Palletizing Cell with Fonic RobotThe automated palletizer combines two performance technologies to create high-quality pallet loads: the speed and reliability of standard Premier Tech conventional machines with the flexibility of robotic equipment. --This low-maintenance palletizer is specifically engineered for powdery, granular, or bagged products requiring overlapping, squaring, or compressing.Speed: up to 24 units per minuteApplications: bags and bundles

PRESTO P3-AA ROUND PNEUMATIC AIRBAG LOAD LEVELERTurntable top with easy turning anti-friction bearings allows users to spin loads so they are always working from the near side without having to walk around the unit.Specifications: -- Automatic positions loads between 9-1/2" and 27-3/4" -- Small base allows workers to stand up close to the P3 at any position -- Stable design requires no floor lagging -- Build fork pockets for easy lagging, -- Load capacity 4,000 Lbs -- Raised height 27-3/4" -- Lowered height 9-1/2" -- Overall base 36" W x 36" L -- Turntable diameter 43-5/8" -- Shipping weight 450 Lbs

2012 PRIME TECH PT300 Forestry Mulcher with 3,805 hours. Length: 22 ft 0 in Width: 7 ft 10 in Height: 9 ft 5 in Weight: 33,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

SPECIFICATIONS: - Chip Capacity: 50 LBS/HR - Puck Size: 2? - Chamber Size: 16? X 6? - Puck Exit Conveyor: 6' X 6? - Approximate Floor Space: 5’8? LR X 4' FB X 6’2? H - Electrics: 480 Volt, 3 Ph, 60 Cyc Allen Bradley Panelview 300 Controller

Battery powered wood chipper. Machine does not have an engine. Plug it in and the next day you are good to tow it to a job. 5 hours of run time. Chip up to 6 inches.

RADER - Trailer Dumper with 30 ft. Tipping DeckComes with the following components and features: -- This unit was installed at the current location in approx. 1971 and is reportedly in great working order and condition. -- Previously used for Dumping Wood Chip Trailers. -- Professional rigging and loading is available. Decks are often extended for longer (53 ft.) trailers.