Equipment For Sale

2011 Terex PT100G Skid Steer, 6116 hrs., Tracks & Undercarriage recently rebuilt, comes with Bucket & forks, Fecon Mulcher available, $33,950

2015 Terex R200S Skid Steer with 3,377 hours. 60 HP, Lift Capacity at 35% 700 lb., Lift Capacity at 50% 2000 lb. Operating Weight 6370 lb. Overall Length with Bucket 133.6 in Overall Height to Top of ROPS 77 in. Width 66 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Teremax Dump Truck on Tracks, 1800 Hours, New Final Drives

TEREX ATLAS 1604 K ZW Wheeled Excavator w/ Grapple and MagnetSpecifications: -- 120 HP Diesel Engine -- 7.5 kW generator.Equipped with: -- Grapple -- Magnet -- Just replaced the solenoids fuel injectors and the exhaust valve. Hours: approx. 3,500

TEREX 256 Off road truck Runs good Needs brake work

CAT C4.4 TIER4F DIESEL ENGINE (110HP) 5' X 16' SCREEN 3.3 CU YD HOPPER CAPACITY RADIAL CONVEYOR W/180 DEGREE SWING AND VARIABLE DISCHARGE HEIGHT 39,700 LB OPERATING WEIGHT DOUBLE-AXLE, MECHANICAL SUSPENSION LOW LEVEL REMOTE GREASING TEREX COMPLETE 1 YEAR/2000 HOUR WARRANTY CAT 2 YEAR/3000 HOUR STANDARD WARR

2014 Terex Phoenix 3300 trommel -8900 hours -Rebuilt engine and new main pump -Belts are in good shape -Has self-cleaning tail pulleys -New fluids Everything works as it should !!!

175 hp, Cummins, 6 cylinder,diesel, 9' bucket, 20.5 R25 tires

2014 Terex TBG 640 Horzontal Grinder with 210 original hours. NEEDS ENGINE it was a Cat C18. The mill takes Morbark 1300 hammers and tips, pumps are there, 210 original hours on the machine. Weight 82,000 lbs Length 43' Width 8' 3" Height 13' 3" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

C18 Cat 765HP, New valve banks.  Remote control FOB CANADA - FOR DELIVERY OPTIONS CALL

2019 Terramac Rat9 Track Dump With 600 hours, A/C &Heat, Radio, Work Ready. Machine Weight (with rock bed) 26,180 lbs. Full Length 19’ 6” Full Height 9’ 11” Width Over Tracks 8’ 3” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

TERCO NORTHSTAR 10-8 Spindle Carver.8-Spindle Carver with 10" center-to-center chuck spacing. -- (2) 0.5 HP - 3,450 RPM spindle motor direct "belt drives" spindles for 11,000 RPM rotation. -- 36" Long carving cap, with optional length extensions up to 72". -- Manual rotation for round parts. -- Operator manually traces the pattern details of the master with copying stylus. -- Capable of doing both base relief (flat backed) and 360° full round carving. -- Includes: (1) Set roughing bits, (2) sets finishing bits, tools, and manual.

CMS represents Big on Dry (BOD) Thermo Wood Kilns in the USA. This system is another on elf our customers in the USA who is producing mostly poplar and oak decking. Big on Dry has improved the Thermo-Modification process with their THERMOWOOD (THW) line and provides complete "turn key" systems. The PLC control systems allow programming for a wide variety off wood applications. This allows the same systems to work with very delicate wood that is hard to treat to thicker wood that will be used for outdoor products. The THW system can also be used as a conventional kiln with steam. Basic systems include: - Kiln completely built with stainless steel and aluminum - Initial humidy of 10-15% is reduced to 5-6% - Loading options: Side or Trolley - Heating options: Gas or Wood Burner - Humidification: Combined Spraying System

Table Size: 5' x 10' Spindle: 18 HP HSD Max. Spindle Speed: 18,000 RPM Number of Axis: 3 Gantry Clearance: 10.5? Z-Axis Stroke: 6? Power: 460 V, 3 Phase Approx. Shipping Weight: 12,000 Lbs. Approx. Shipping Dimensions: 7' W x 16' L x 8' H Equipped With: Roller hold down 5 position Typewriter Arm Style Tool Changer Daylight touch off sensors Equipped for Vacuum Hold Down Windows 2000 Operating System

THERMWOOD CS 40 CNC Router, 4 X 8 with ATC:Under power for inspection!4' x 8' Moving table machine in a front-to-back configuration with single-zone vacuum plenum. -- Equipped with:(1) 10 HP HSD, ISO-30 type routing spindle, variable spindle speed from 3,000 - 24,000 RPM, 5-position "typewriter-style" ATC mounted on the front of the spindle, and (4) position wine rack at rear of table. -- Features:High-performance closed loop SEIMENS AC Servo motors driving precision ball screws on all axes with TURBO motion for feed speeds up to 2,400 IPM on the X- & Y-axis and 600 IPM on the Z-axis. -- Control:THERMWOOD "91000" PC Based control with WINDOWS/2000 operating system, 3-axis simultaneous motion, handheld programmer with feed rate & spindle speed override. -- Features:Color monitor, large hard drive, CD ROM drive, 3-1/2" floppy disk drive, keyboard, RS-232 port for PC communications, mounted in an air-conditioned Nema-rated control cabinet, E-CABINET software ready. -- Complete with: 18 HP BECKER vacuum pump, assorted tool holders, and documentation.

5X10 table typewriter style tool changer at the head. 5 tools bar style tool change 4 tools c - axis at the head also for aggregate tools. 480V/60HZ

Twin tables 5×10’ aluminum X axis: 124” Y axis: 124” Z axis: 36” Rotation: 360 degree Tilt: 270 degree 10 hp Spindle ISO: 30Equipped With: 6 Position Tool Changer Auto Lubrication Thermwood Super Control CAD/CAM Auto Tool Length Sensor

Thermwood C42 CNC Router (2) 5'x5' Tables It has 2 large routers, 4 smaller routers, and 2 aggregate heads in the turret Travainni Vacuum Pump Note from Seller: Includes two shaper heads that are not mounted into the turret and one pneumatic drill head that is not mounted into the turret. I also have one seat of Microvellum cabinetry program that I will transfer to you along with the purchase.