Equipment For Sale

This machine is no longer needed at the current facility. Ready to load. Wadkin NNV-C Profile Grinder 3-phase Specification VISAGE - With bilateral linear action providing profiling and straight knife grinding up to a max of 335 mm. Will shape and regrind moulder knives in the block and profile grind solid tipped heads. Suitable for HSS, Stellite and TCT. Max length of cutter profile 335 mm. Max dia of cutting circle 350 mm. Includes arbor, grinding wheel, stylus, etc. Also included Carriage locks; Washdown facility. - per seller: Arbor on the machine itself is 1 1/4" we have a spacer we use on grinding wheels if we need to adapt them to our size arbor. Yes there is a dresser on the machine.

Wadkin K23 5 Head Moulder Largest Motor is 20HP S/N 99/2093 440 Volt 3 Phase Electric Motors

Wadkin Profile Grinder as pictured

WADKIN GD 220 6-Head Feed Through MoulderSpecifications: -- Working capacity: 230 mm W x 130mm H (9.06" W x 5.12" H) Timber admitted, 220 mm W x 120 mm H (8.66" W x 4.72" H) Finished timber. -- Head Sequence: Bottom 7-1/2 HP, Right 7-1/2 HP, Left 7-1/2 HP, Top 15 HP, Bottom 10 HP, & Universal 7-1/2 HP. -- Spindle dia. 40 mm (1.57"), Spindle speed 6,000 RPM. -- Variable feed speeds 6 - 22 MPM (20 - 72 FPM).Equipped with: -- Right, Left & Top heads with Mechanical digital readouts. -- 1/2 HP Motorized feed beam, 2.2 kW Feed motor, 3 HP Cardan drive, Reverse feed, 5-1/2" Dia. Hardened & Chromed steel feed rollers up to top head, 2" x 2" Polyurethane feed rollers after top head, All feed & pressure rollers move with rise & fall of feed beam. -- 2 M (78.74") L Infeed straightening table. -- Manual bed lubrication. -- Sound enclosure.

WADKIN "GD 220" 5-Head Molder8-5/8" X 4-3/4" cap. - Head sequence: Bottom 7.5 HP, right 7.5 HP, left 7.5 HP, top 10 HP, bottom 7.5 HP motor.Other Specifications: -- All spindles 40 mm dia. at 6,000 RPM, with vertical and horizontal adjustments; electric spindle braking; (2) digital position indicators with tool radius compensation fitted to the horizontal movement of the right side head and vertical movement of the top head. 0.5 HP Motorized feed beam with pneumatic feed hold-down wheels; -- Cardan drive variable feed speed 18 - 72 FPM, 3 HP feed drive, reverse feed, 5-1/2" dia. hardened and chromed steel feed rollers up to top head, polyurethane feed rollers 2" x 2" after top head; all feed and pressure rollers move with the rise and fall of the feed beam. -- Diameter of cutting circle: minimum 100 mm all heads; for planing, maximum 125 mm all heads; and, maximum of 195 mm all heads for moulding. -- Complete with: Manual bed lubrication, 2-meter (78") infeed straightening table, sound enclosure and owner's manual.Like New Condition - this Moulder has never been used, and is still sitting on factory shipping pallet.

Model GD-220-5 220 volt three phase, 60 hz, 67 amps Max workpiece admitted 230 mm x 130 mm (9" x 5") Max workpiece finished size 220 mm x 120 mm (8.66" x 4.72") 10-1/2" wide x 77" long adjustable height infeed table 1" high adjustable infeed fence 40mm Spindle dia. - 1st head: bottom horizontal spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 2nd head: right hand vertical spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 3rd head: left hand vertical spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 4th head: top horizontal spindle 15 hp, 208-230/460 volt three phase drive motor - 5th head: bottom horizontal spindle 10 hp, 208-230/460 volt three phase drive motor cardan feedworks Mechanical digital readouts on chip breaker and axial adjustments Sound and safety enclosure with lift up hood around all heads Interior cabin work light 3 hp, 208-230/460 volt three phase feedworks drive motor Variable speed feed with 20 to 75 ft/min range Push button motor controls

WADKIN "GA-220" 5-Head Feed Through MoulderSpecifications: -- 5-Head, with 8-5/8" x 4-5/8" cutting capacity (220 mm x 120 mm) -- 40 mm Spindle diameter with cutterhead speed of 6,000 RPM. -- Head sequence: Bottom 10 HP, Right 7-1/2 HP, Left 7-1/2 HP, Top 15 HP, Bottom 10 HP motor. -- 2 HP variable feed speed 19 to 72 FPM, chain drive. -- Currently wired for 460 Volt, 3-Phase power.

Wadkin GA 5363 5 Head Moulder

7 Spindle Moulder with Manual Bed Lubrication 6000 RPM Spindle Speed 19-91 F/Min Feed Speed Will Take 7" x 5" Lumber Specs: 1ST BOTTOM--7.5 HP 1ST FENCE SIDE--7.5HP 1ST LH SIDE--10HP 2ND FENCE SIDE--7.5 HP 1ST TOP-15HP 2ND BOTTOM-10HP UNIVERSAL-7.5 HP FEED DRIVE--3 HP BEAM LIFT--.5 HP

Great Condition 5000 RPM Spindle speed 8 Head with jointers 1-13/16" Spindle Diameter, Belt Driven 2 bottom cutter heads with jointers-15HP/15HP 2 top cutter heads with jointers--20 HP/15HP 2 right hand cutter heads with jointers--10HP/10HP 1 left hand cutter head with jointer--10HP 1 universal cutter head--10HP

Fits CAT M318 Wain Roy M318 Pin Lock Tilt Coupler

COMPAITBLE WITH WAINROY XLS DOES NOT INCLUDE CONNECTING LINES DOES NOT INCLUDE MOUNTING PINS PIN LOCK STYLE LINKAGE SOLD AS IS WAINROY PART NUMBER 40232 WAINROY SWINGER COUPLER

DOES NOT INCLUDE BUCKET PINS FOR USE WITH PIN LOCK XLS SYSTEM STYLE LINKAGE WORK TOOLS INCLUDES CONNECTING LINES INCLUDES CONNECTING LINES MOUNTS ON CATERPILLAR A LINKAGE 311-315, M314-M315 SOLD AS IS WAINROY M314-M315 SWINGER COUPLER WAINROY PART NUMBER 40232

M316 36" HD4 XLS BUCKET

CATERPILLAR M312/M315 FITS WAIN ROY XLS SYSTEM PINS NOT INCLUDED SOLD AS IS WAIN ROY HYDRAULIC SWINGER COUPLER

INCLUDES BOLT ON CUTTING EDGE PIN LOCK LUGGING SOLD AS IS WAINROY 72" DC BUCKET WORKS WITH WAINROY XLS SYSTEM

A LINKAGE (311-315 AND M314, M315) COMPATIBLE WITH 1/2 YARD XLS PIN LOCK BUCKETS CONNECTING LINES NOT INCLUDED MOUNTING PINS NOT INCLUDED SOLD AS IS WAINROY SWINGER COUPLER

COMPATIBLE WITH WAINROY 1/2 YARD XLS SYSTEM CONNECTING LINES NOT INCLUDED MOUNTING PINS NOT INCLUDED PIN LOCK STYLE LUGGING PINS TO CATERPILLAR 310 PINS TO CATERPILLAR 310 EXCAVATOR OR 450E BACKHOE SOLD AS IS WAIN ROY XLS SWINGER COUPLER

M318/M322 36IN HD5 BUCKET SET UP FOR PIN-LOCK WAIN ROY COUPLER SYSTEM USED ON M314F, N316F, 318F CLASS MACHINE

PIN LOCK STYLE INTERFACE SOLD AS IS WAINROY 36" HD4 XLS BUCKET WORKS WITH WAINROY XLS COUPLER OR CAT PIN LOCK COUPLERS PART NUMBERS 514-9167 OR 512-6578