Dry Kilns For Sale
Category
Dry Kilns
.gif)
37 Results Found
$ 47,500
NOVA TTF-6200 Dry Kiln System; Unassembled Front Load Kiln Designed to hold 5,100 bd. ft 4/4 Lumber, or 6,120 bd. ft 8/4 Lumber, Using 3/8" (9 mm) stickers. -- Specifications: Interior Dimensions: H 10' 3,5" (3.14 m), D 7'2"(2.19 m), W 25' 3" (7.7 m). -- Loading Door Opening: H 9' 10" (2.85 m), W 25' 3" (7.7 m). 1/8 " Aluminum sidewall bumpers, side hinged doors, exterior installation. -- Average 4/4 capacity: 5,100 bd. ft (12 m3) with 3/8" (9 mm) stickers. -- Average 8/4 capacity: 6,120 bd. ft (14 m³) with 3/8" (9 mm) stickers. -- Price shown is for kiln only. -- High horsepower heat requirement: 128 k BTU/hour. -- Heated Floor System, manuals and blueprints. -- Electrical Requirements: 230 VAC, 1 Phase, 60 Cycle, 25 kw/Hr max.
(2) Unassembled front load Kilns only System with high HP heat and exhaust designed to hold 8,461 bd/ft (20 cub.m) of 3/4" (25 mm) lumber and 10,475 bd/ft (25 cub.m) of 8/4" (50 mm) lumber (35 cbm). -- Kilns internal dimension: Height 12'3-1/2" (3.75 m), Depth 16' (4.88 m), Width 21' (6.4 m). -- Loading door opening of 10' (3.05 m) x 21' (6.4 m); 1/8" aluminum side wall bumpers, side hinged doors, exterior installation. -- High HP will service the heat requirements up to 245k BTU/Hr. -- Electrical requirement of 230 VAC, 3-Phase, 60 Cy; 7.21 kW/Hr. -- System includes: Timber Dry management automated Dry Kiln Controls for each kiln, touch-screen operator interface, data recording, optional remote access, and networking capability, Replacement part kit for a kiln. Manuals & Blueprints
$ 197,600
Unassembled Front Load Kiln with Standard Heat and Exhaust -- Interior dimensions: H 17' 6" (5.33 m), D 25' 8" (7.8 m), W 26' (7.9 m). -- Loading Door Opening: height 14'6" (4.4 m), width 25'3" (7.7 m). 1/8" Aluminum Bumper Walls, Top Hinge Door, Exterior Installation. -- Average 4/4 capacity: 25,459 Bd Ft. with 3/4" stickers. Average 8/4 capacity: 33,293 Bd Ft with 3/4" stickers. -- Price shown is for kiln only. -- Standard HP Heat requirement: 382k BTU suitable for drying dark hard woods; Optional high HP Heat requirement: 674k BTU suitable for drying softwood and white hardwoods. -- Electrical requirements: 480 VAC, 3 Ph., 60 Cy; 16.5 kW/Hr. Timber Management Control System with touch screen operator interface, data recording, remote access & networking capability. -- Features: Control room with heated air intake; 12'H x 4'D x 26'W. Top Hinge door opening System includes "230" electric chain hoist. Boiler Room: 12' W x 25' D x 17'6" H. 10' roll up & (1) access door. - Timber Dry Management Network Capability.
$ 7,000
Nyle Kiln L300 - L300 Nyle high temperature Lumber drying Kiln - 240v single phase. Capable of temps up to 160 degrees. - Bought new in 1999 Call 800-459-2148 for more info.
Nyle PHT350 Kiln System was powered up and tested, but not put into production.
Kiln Carts as pictured Wheels 72” on center Qty 153 47” x 108” x 10” Qty 125 47-3/4” x 152” x 12” Qty 18 48” x 152” x 16” Qty 1 62” x 108” x 10-1/2”
$ 55,000
40000 BF Kiln with Boiler for sawdust or chips. Call 800-459-2148 for more info.
$ 1,000
2 side by side pass-by kiln doors, mounting hardware, and carriers 19' width x 15' height. Call 800-459-2148 for more info.
Custom Built Portable Solar Kiln - Built in 2016 by the seller - Will hold lumber 10' 3" long - Can fit 1224 bf in chamber - Dimensions: 14' long, 8' wide, 11' height - Averages 800 - 1000 bf per run - Portable with ibolts for pulling - Includes enough wooden stickers to dry a full load - Kiln is currently in storage Call 800-459-2148 for more info.
$ 120,000
AMERICAN WOOD DRYER KILN - 2 chamber package type dry kiln. New 1994. Very good condition. Requires low pressure steam (15 psi). 5 VFD controlled fans. Includes controls and boiler room and Boiler . Capacity approximately 50,000 board feet of 4/4 per chamber for a total of 100 MBF. Each Chamber and Boiler room is 36' Long x 20' High x 32' Deep, Rigging Not included.
Dry Kiln Framing for the Building Doors Included.
