Electrical For Sale
Category
Electrical
.gif)
45 Results Found
used 300HP electric motor, tested ran at independent motor shop, have paper work and video, looks to be rewound from the wire leads
100 HP Lincoln Electric Motor Call 800-459-2148 for more info.
MARCUS TRANSFORMER 15 KVA, 3-Ph, Auto, 600/480 V Transformer with tap for 440 V.15 KVA Auto-ventilated "dry type" transformer 600 V in (primary); 480 V out (secondary) with tap on secondary for 440V at full capacity. -- Manufactured with grain oriented silicon steel is used. -- Coil windings with high quality magnet wire and the enclosure is made of heavy gauge steel w/ventilation openings. -- UL and CSA approved.
This is an in-line electrical monitor for proportional hydraulic valves with on-board electronics. Designed to monitor those voltages which can affect the control of proportional hydraulic valves in a hydraulic system. Please call for more information. TESTIMONIAL:I am the Operations Manager at GPM Hydraulic Consulting and we have been using the Model PVT-02 proportional valve tester to troubleshoot proportional valves for our customers for many years now. We have purchased test boxes for all of our Consultants to use in the field when troubleshooting. This test box has saved us hours of troubleshooting and in return saved our customers hours of downtime. The box is connected in a series so you can observe the supply voltage, command signal and LVDT (linear variable differential transformer) feedback from the proportional valve while the system is running normally. You can also use the box instead of the PLC to drive the valve to see if the problem is the controller or valve itself. If you have proportional valves, you need to get one of these test boxes. Without the box to troubleshoot, your valves may get changed when there is nothing wrong with them. This box is also very affordable, a lot cheaper than what a proportional valve costs. Last year I went on a consult for a company that made floor panels for BMW. A proportional valve is what controlled the press opening and closing but the press would not move. I connected the test box to their valve in series to watch the power supply, command and feed back voltages. When a command was given to lower the press, a power supply voltage of 22.6 volts was supplied to drive the valve amplifier. Normally the voltage should be 24 volts however, 22.6 was within the acceptable limits of operating the amplifier. The command voltage applied was 3.5 volts. The LVDT feedback voltage should have been 3.5 however, it was reading near 0 at .4 volts. This indicated that the main spool did not move. We then move the selector switch to drive the valve with the box. The voltage was increased to 10-volt manually. The LVDT feedback continued to read .4 volts indicating that the pilot valve shifted but the main spool did not. We removed the valve assembly and found that contamination had caused the spool to stick.
REX MFG. 30-208/600 Auto TransformerSpecifications & Features: -- 30 KVA Auto-ventilated "dry type", 3-phase Auto Transformer; 208 Volt primary, 600 Volt secondary. -- Manufactured with 3-legged cores and high quality, grain oriented silicon steel; core steel is precision cut and stacked for reduced noise and losses; cores clamped with heavy steel brackets.Complete with: -- Coil windings with high quality copper magnet wire; -- Class 220° C insulation is utilized througout the coil winding process; -- Coil is impregnated and baked in Polyester resin varnish; substantial cooling ducts for effective cooling.Includes: -- NEMA 3R Indoor, sprinkler proof steel enclosure; -- UL & CSA approval; delivery anywhere in the Continental USA.
REX MFG. 75 KVA RC75C2-F/N 220/380 Three-Phase Auto TransformerSpecifications & Features: -- 75 KVA Auto-ventilated "dry type", 3-phase Auto Transformer. -- 220 Volt primary, 380 Volt secondary. -- Manufactured with 3-legged cores and high quality, grain oriented silicon steel; core steel is precision cut and stacked for reduced noise and losses; cores clamped with heavy steel brackets. -- The 75-460/600 Transformer coil windings have high quality copper magnet wire; Class 220° C insulation is utilized througout the coil winding process; coil is impregnated and baked in Polyester resin varnish. -- Complete with: -- Substantial cooling ducts for effective cooling. -- NEMA 3R rated Heavy Gauge steel enclosure w/ventilation openings; sprinkler proof. -- UL & CSA approved. -- Includes: -- Delivery anywhere in the Continental USA.
REX MFG. 200 KVA RC200C-F/N 240/380 Three-Phase Auto TransformerSpecifications & Features: -- 200 KVA Auto-ventilated "dry type", 3-phase Auto Transformer. -- 240 Volt primary, 380 Volt secondary. -- Manufactured with 3-legged cores and high quality, grain oriented silicon steel; core steel is precision cut and stacked for reduced noise and losses; cores clamped with heavy steel brackets. -- The 75-460/600 Transformer coil windings have high quality copper magnet wire; Class 220° C insulation is utilized througout the coil winding process; coil is impregnated and baked in Polyester resin varnish. -- Complete with: -- Substantial cooling ducts for effective cooling. -- NEMA 3R rated Heavy Gauge steel enclosure w/ventilation openings; sprinkler proof. -- UL & CSA approved. -- Includes: -- Delivery anywhere in the Continental USA.
REX MFG. 75 KVA RC75H1-J, 460/600 Three-Phase Auto TransformerSpecifications & Features: -- 75 KVA Auto-ventilated "dry type", 3-phase Auto Transformer. -- 460 Volt primary, 575/600 Volt secondary. -- Manufactured with 3-legged cores and high quality, grain oriented silicon steel; core steel is precision cut and stacked for reduced noise and losses; cores clamped with heavy steel brackets. -- The 75-460/600 Transformer coil windings have high quality copper magnet wire; Class 220° C insulation is utilized throughout the coil winding process; coil is impregnated and baked in Polyester resin varnish. -- Complete with: -- Substantial cooling ducts for effective cooling. -- NEMA 1 rated Heavy Gauge steel enclosure w/ventilation openings. -- UL & CSA approved. -- Includes: -- Delivery anywhere in the Continental USA.
REX MFG. 200 KVA RC200H-G1/50 480/400 Three-Phase Auto TransformerSpecifications & Features: -- 200 KVA Auto-ventilated "dry type", 3-phase Auto Transformer. -- 480 Volt primary, 400 Volt secondary. -- Manufactured with 3-legged cores and high quality, grain oriented silicon steel; core steel is precision cut and stacked for reduced noise and losses; cores clamped with heavy steel brackets. -- Coil windings have high quality copper magnet wire; Class 220° C insulation is utilized throughout the coil winding process; coil is impregnated and baked in Polyester resin varnish. -- Complete with: -- Substantial cooling ducts for effective cooling. -- NEMA 3R rated Heavy Gauge steel enclosure w/ventilation openings; sprinkler proof. -- UL & CSA approved.
SEVEIN - 12KVA, operates on 50 - 60 Hz, ...Transformer with Neutral wire (on 400 V side). -- General-purpose enclosed, European made, 12 KVA, 3-Phase ventilated Autotransformer. -- Primary 400 V, Secondary 208 - 220 V, 50 - 60 Hz.
$ 4,950
SIEMENS - 75 KVA,... 480 - 380Y/220 Volt 3-Phase Dry Type TransformerSpecifications: -- General purpose: Intended for power, heating, and lighting applications. -- Enclosure Rating: NEMA 3R ventilated; for indoor or outdoor use. -- Multi-tap (432-504) Primary 480 V (Delta); Secondary 380/220 Volt Y - 60 HZ ventilated. -- Aluminum winding material. -- NEMA Class ANN. -- Catalog # 3F6Y075FCD16.(2) Available; priced per unit; make offer for both!
$ 3,950
SQUARE D - 75T3H, ...75 KVA, 480 - 208 V, 3-Phase Autotransformer Specifications: -- Intended for power, heating, and lighting applications. -- Enclosure Rating: NEMA 2. -- Multi-Tap (432 - 504 V) Primary 480 V (Delta); Secondary 208Y / 120 V @ 60 Hz ventilated. -- Aluminum windings. -- cULus Listed. (2) Available; price per unit. - Make offer for both!
Teco Induction Motor, Type AEVFACLQ9 Frame, 160 M 20 HP RPM 3520 Volts 230/460 3 Phase. This electric motorwas taken NEW off a LeaderMac 523 SpeedMac. There are 2 of these. Call 800-459-2148 for more info.
ASSORTED MOTORS, IN ALL HP & SPEEDS AVAILABLE. Chipper and band mill motors 400HP, US, 585 RPM, DRIP, FRAME 1689S. TOSHIBA 200 HP at 1200 RPM. General Electric 300 HP, 514 RPM, 460 Volt for direct connect, Old style GE frame 17A's and 17B's to redesign up to 500 HP @ 450 RPM. 300HP ALLIS CHALMERS MOTOR 514 RPM, DRIP, 30KS8 FRAME. Many other sizes available CALL FOR YOUR SPECIFIC NEED. From 10HP to 600HP. See gear reducers with various HPs and ratios (see Gear Reducer listings).
rotary 230 volt, 25 HP phase converter, excellent condition
$ 2,750
Toshiba 3 phase, 150 hp, TEFC, 890 rpm's, 505UZ frame, very good condition