Feller Bunchers For Sale

1985 Hydro-Ax 311B Shear head Deere engine 23.1x26 tires 7967 hours Runs and operates good

1999 Hydro AX 611EX Feller Buncher, 24” Koehring Head, 8.3 Cummins, Hours unknown. Length: 26 ft 7 in Width: 9 ft 3 in Height: 10 ft 4 in Weight: 25,800 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Just out of the shop. We replaced the saw head with a nice FD55. Saw head checks out. New carbide teeth installed. Cylinders packed as needed. Replaced front valve bank. Pins and bushings replaced as needed. Nice clean cutter. Ready to work. Other tires available upon request.

2010 John Deere 753J, 11,890 hrs., Quadco OFH 360 20B Head, Deere 6068 Turbo Diesel Engine, 2 spd. Trans., Undercarriage roughly 40%, 24" single grouser pads, EROPS, Heat/AC, Radio, Joystick controls, preheater, $109,500

FR27 Saw, 28” Single Grouser pads, call for details.

Low Hour Only 4300 Feller Buncher Priced To Sell

2021 John Deere 843LB, 1936 hrs., $354,906

2018 John Deere 843L, 7874 hrs., $159,000

2018 Deere 859M Feller Buncher, Equipped with Quadco 24B 360 Degree Hot Saw, ONLY 7600 Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 75%, Fire Suppression, NEW Crate Engine Tier 4 9 Liter, New DPF and Sensors, Engine is being replaced due to Low Compression in Cylinder, More Pictures Coming Soon, Ready for the Woods. Length 16.1 ft. Width 10.11 ft. Height 12.10 Weight 79,510 Lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 John Deere 753J -10717 hours -Brand new sprockets and idlers -New ecm -Oil pan gasket replaced and rear main seal -New Hydraulic pump no hours on it -21" Quadco 360 head

2011 John Deere 703JH S/N 703JHCA0193726 2021 DS-3550 Ryan's Dangle Saw Head 35" Capacity 43" Bar Long Boom 17000 Frame Hours New Motor And Pumps @12,500 Hours New Air Ride Seat New Joystick 70% U/C

Very good tractor, low hours, just needs an operator. If interested in this machine call Kameron 251/242/5493 Tim 251/366/3237 Gavin 601/394/7796 This tractor is located at 467 Saint Peter Street, State Line, MS. 39362

2013 DEERE 843K Wheel Feller Buncher Hours- 6,625 Serial Number- 1DW843KXCDC654496 FD22 Head available for an additional cost

2008 John Deere 643J Parts Machine Koehring center post hotsaw head Decent rubber Engine caught fire Selling as parts machine

JOHN DEERE 643D FELLER BUNCHER 6 CYL DEERE STEERING WHEEL STEER KOEHRING WATEROUS HEAD DRIVE PUMP IS OUT OF IT 28L-26 RUBBER

2015 John Deere 643K

2018 Deere 853M Feller Buncher Equipped with a FD55 Cutter Head, 6,600 Original Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 60%, Repacked Cylinders on Head, 2022 Swivel Bearings Replaced, Serviced Recently Ready for the Woods. Operating Weight 67,704lb Overall Width 10.83 ft in Length Of Track On Ground 12.7 ft in Ground Clearance 31 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 John Deere 853M -7200 hours -22in JD 360 degree head -Tight and dry -Uc is good Ready to work!!!

2016 John Deere 643L, 8,400 hrs., new Reman eng., 28L tires w/dual rings, tight & dry, $75,000