BioMass Equipment For Sale

2005 Powerscreen 1800 Track Unit, Engine is a Caterpillar, 5000 Hours, Grizely Bars on Top Deck, Scalping Screener, Brand New Tailings Conveyor, New Bearing Housing for Shaker, Complete Engine Service done Recently, Ready to Work. Weight 66,139 lbs Transport width 9'6? Transport length 50'11” Transport Height 11'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 POWERSCREEN CHIEFTAIN 1400 -8785 hours -Hydraulic folding conveyors for quick setup -Screen walkways and access ladders for easy maintenance -Drop-down tail conveyor for screen media changes -Radio-controlled tipping grid -Integrated high-capacity variable-speed belt feeder -Grease-filled 4-bearing,2-deck screenbox -Impressive 400 TPH capacity -Applications Sand & gravel, Blasted rock, River rock, Topsoil, Composted materials, Wood by-products and more!

Precision 58" Chipper - Model 58-60-16 6 Knife 150 HP Motor

Precision Husky 23 Chipper Needs engine Has Cummins KT19 650HP

2001 PRECISION HUSKY PROGRIND 1000 TUB GRINDER REDUCED 275 HP New Fixed Teeth New Auger Motors Good Tires Runs Well

Complete chip plant includes: - The infeed is 12’ above ground level. They were feeding it one log at a time with a shovel. - There is a single chain 12” wide leading to the debarker. - The debarker is a Salem 20” ring debarker with mcdiarmond controls. - From the debarker it goes through I think is a metal detector. It’s is enclosed, 8’ long with a belt conveyor. - 75’ of 3-strand chain that reduces to 2-strand chain for 35’ then goes to another 2-strand chain for 12’ then goes into the chipper. - The chipper is a Precision with 2- 400 hp high efficiency 3 phase motors. - From the chipper the chips drop onto a 42”x50’ inclined belt that leads to the 2 deck screen. The screen is 92”x20’ - The waste goes on a 9”x20’ incline belt and dropped into a truck. - The chips go out on a 3-strand 100’ conveyor (strands are 14” wide) to a radial stacker for loading trucks. The stacker belt is 42”x65’ - Chips can be redirected to blower unit system that will transport them to a rail siding to so they can be loaded into a rail area. It starts out with 75’ of 12” pipe running on the ground. Then it sweeps straight up to a height of about 24’ and goes 150’ to a siding across the county road. The chip loading facility is intact. - The hog is located back by where the logs are loaded onto the chain going to debarker. Here’s a list of the conveyors going back to the Kockums hog. It has a 24”x36” opening at the top. - Conveyors: 12”x100’, 12”x 25’, 12”x60’. All of these conveyors are 1 strand steel.

1996 Precision Whole Tree Chipper 21" Capacity 700 HP Cummins KTA Twin Turbo Needs Clutch AC Heat Good Feed Rollers Disc Wheel Completely Rebuilt New Anvil New Wire Plate Husky 235 Loader 52" Rotobec Grapple PRICE REDUCED

MLS Number 10237206 Precision Husky ProGrind 4000 Tub Grinder 4092 Hours 500 HP Cat 3406B engine Loader with cab

The seller has confirmed that this 96" Precision chipper is in good working/running condition and is ready to load. This was not heavily run. This came out of a chip plant in WA. Model 96.27 - Horizontal feed - Side discharge - 4-Knife whole log chipper - 8" thick chipper dissc - Built in disc brake - Extended front shaft for hydraulic starter - Hydraulic starting motor - Side discharge pipe with motorized outlet adjustment - 27" maximum log diameter - Many spare parts and knives included - Average production rate: 125 tons per hour - No hydraulic pump - No motor - an 800HP one can be added for additional cost though... The photo's show the optional extended shaft and hydraulic starting motor which is a special feature....

PRESTO P3-AA ROUND PNEUMATIC AIRBAG LOAD LEVELERTurntable top with easy turning anti-friction bearings allows users to spin loads so they are always working from the near side without having to walk around the unit.Specifications: -- Automatic positions loads between 9-1/2" and 27-3/4" -- Small base allows workers to stand up close to the P3 at any position -- Stable design requires no floor lagging -- Build fork pockets for easy lagging, -- Load capacity 4,000 Lbs -- Raised height 27-3/4" -- Lowered height 9-1/2" -- Overall base 36" W x 36" L -- Turntable diameter 43-5/8" -- Shipping weight 450 Lbs

2012 PRIME TECH PT300 Forestry Mulcher with 3,805 hours. Length: 22 ft 0 in Width: 7 ft 10 in Height: 9 ft 5 in Weight: 33,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Brand New 2022 Raptor 500-Black Edition Mulching Carrier coming in May! This massive machine has a Cummins engine with 440HP that will rip up almost anything in its path. The equipped M700 PTO driven mulching head comes with a 91"" cutting width and flappable carbides for optimum wear life and performance. Other features include a 360 degree camera system, reverse camera, in cab cooler, auto reversing fan, and winch. The 2022 Raptor is sure to turn some heads! Give Quality Equipment & Parts a call today!

New 2023 PRINOTH RAPTOR 100 Remote Mulching Carrier now in stock! Includes the Following: - Engine 75HP Deutz TD2.9L Stage V/Tier4F - Cleanfix reversable fan - 12 Gallon Diesel fuel tank - Rubber tracks 12 inch adjustable in width - High Flow hydraulics 25.4 GPM @ 4351 PSI - Front linkage with float position - 3 Point lifting arm - Remote controlled - Auxiliary winch 1 Ton (360 Degree Use) - Ground clearance: 12.6 in - Carrier Weight: 4409 lbs - Length: 120.5 in M450H-1450 Standard Attachment: - Axial Piston Motor - Replaceable Liners - Hydraulic Flap - Hydraulic Push Bar - Cutting Width: 57 In - Total Width: 65 In - Weight: 1190.5 Lbs INCLUDING THE FOLLOWING OPTIONS Remote Mulching Carrier Winch Assembly Contact Quality Equipment & Parts for more information!

The M450s mulcher is designed for the compact loader segment or other hydraulic driven carriers. Developed for a range of carrier vehicles from 80 – 150 hp and a volume flow between 26.4 – 52.8 gpm (100 – 200 l/min) the M450s is a compact and powerful head for a diversity of mulching applications. TECHNICAL DATA: Power range 80 – 150 hp Volume flow 26.4 – 52.8 gpm (100 – 200 l/min) Working width 74.8 inch (1900 mm) Total width 86.6 inch (2200 mm) Weight 2668 lb (1210 kg) All NEW 115cc Variable HD displacement piston motor Tools 40x BCS Weight depending on the configuration of the machine optional with or without a flap Price is for our newest inventory of 2021-22 models

Turn your small excavator into a precision mulching tool. The Prinoth M450e-900 will reach into those difficult areas and mulch to perfection. Reach high or reach out and down into places where skidsteers can't go. With our BSC tooth system you can easily change teeth and swap from steel resharpen-able teeth to the carbides. Here is a list of dimensions and features: 49"" overall with a cutting width of 35"" (900mm) Flow required 16 GPM minimum to 29 GPM maximum Weight 992 lbs less mounting lugs. Can be fixed or quick attach 20 teeth Steel or Carbide Plug & Mulch (2) lines. No case drain required. Pressure relief built into the motor! Counter blades prevent large objects from stalling the motor Bolt on wear plates in the housing Optional swivel rotator can be added into the mounting adapter

Mulcher Cutting Width: 57 inches. Brand New Low Flow Mulching Head! This Prinoth Bite Control Mulching attachment is capable of attaching to any 40-75HP skid steer and will accept up to 29 GPM. It has a Bite Control Rotor with Prinoth's Patented knives to make the most production possible out of your machine! Cutting width on attachment is 57"" and overall width is 65"". Weight on attachment: 1190 lbs/ 540 kg

The M450s mulcher is designed for the compact loader segment among other hydraulic-driven carriers. Developed for carriers from 70 – 150 hp and a volume flow between 22.5 – 52.5 gpm The M450s is a compact and powerful head for a diversity of mulching applications. Includes - 40XBCS knive style teeth mounted on drum - Standard Bite Control Rings - QEP Electric Grinding Kit - Stationary Push Bar - HD Variable Displacement Motor - Bolt in Liner System - Standard length hose hit

Brand new 2022 Prinoth M450E-1090! This Bite Control Mulcher will make your 10-12 ton machine as productive as possible with its massive 42"" cut. This unit is equipped with a 46cc motor, QEP Maintenance kit and is ready to install on your machine. We also have an option to add a tilt rotor if requested. Give us a call today for more information.

NEW 2022 Prinoth M550H-2410 mulching head now in stock! This unit features: - Custom Adapter to fit to almost any machine. Perfect head for wheel loaders like Hydro-ax, Cat, etc. - Prinoth Grinder Kit - Dual Rexroth Motors - BCS Style Drum with 64 BCS Teeth - Fixed HD Push Bar - Replaceable Drum Liner - Replaceable Lower Skids - Power Range: 150-300HP Max 80GPM - Drum Width: 8 Feet - Weight 5000 LBS Give us a call today as we only have 1 in stock!