Equipment For Sale

MATTISON - 404, ...Straight Line Rip SawSpecifications: -- 20HP - 3,600 RPM Direct drive arbor motor; 14" dia. max. saw blade cap. (9" smallest dia.), 1-1/2" dia. arbor; 4" thickness capy. -- Table size: 65" x 77" Long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column and 24" rip distance to right of gauge. -- Top roller holddown with 7-1/2" shortest stock handled under (1) roll, 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. -- Chain with automatic oil lubrication. -- 2 HP Feed motor with (2) feed speeds of 50 & 100 FPM. -- Laser light -- 480V to 240V Transformer -- Comes with some 12" 30 Tooth bladesNote : Seller claims the saw will give a glue line

MATTISON 404 Straight Line Rip Saw;Specifications: --25 HP - 3,600 RPM Direct drive arbor motor; --14" dia. max. saw blade cap. (9" smallest dia.), --1-1/2" dia. arbor; 4" thickness capacity. -- Table size 65" x 77" long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column, and 24" rip distance to right of gauge. --Top roller holddown with 7-1/2" shortest stock handled under (1) roll, 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. --Chain with automatic oil lubrication. -- 2 HP Feed motor with (4) feed speeds 62, 93, 124, & 186 FPM

MATTISON 69-42 MATTI-MAX Heavy Duty Automatic Rotary, high production Turning Lathe.Microprocessor controlled for quality turnings and ease of setup; 42" long turning cap. with rotating rear arbor, 4" x 4" max. and 3/4" x 3/4" min. stock size. -- Drives & Speeds: Equipped with: 20 HP - 2,700 RPM Cutterhead Drive, 2-5/8" dia. arbor with variable speed, 2 - 45 RPM stock-rotational speed via 1.5 HP DC drive (reversing) & self-contained hydraulic unit for precise feed control.. -- Complete With: Automatic hopper feed; MATTI-MAX microprocessor-based PLC controller with keypad entry; machine functions & operations parameters are set directly from the control; RPM of workpiece and feed rate can be programmed to vary during the cut. Matching the feed rate to the stock-rotational speed produces an efficient cut -- Features: MATTI-MAX also allows rough cutting at higher speeds (especially rounding of corners) and fine finish cutting at slower speeds. . Pneumatic tailstock with dual pressure to insure penetration of spur center at high pressure and can be adjusted lower for small dia. turnings. -- Total electrical load 27 Amps.

The Rip Saw is still in good running condition and still in use.

MAX Spindle Sander VSI Made is USAOscillating Spindle Sander constructed for rugged use. -- 1 HP Motor drives and is connected through a flexible coupling, and can be installed or removed without disturbing the drive mechanism. -- Spindle speed 1,725 RPM, Oscillation speed 75 Cy/Min with 1-1/2" stroke length. -- Spindle quill runs in precision ball bearings, oscillated by a heavy duty worm & gear mechanism running in a bath of oil. -- (10) spindle sizes provided: 1/4 x 5", 3/8 x 6", 1/2 x 6", 5/8 x 6", 3/4 x 9", 1 x 9", 1 1/2 x 9", 2 x 9", 3 x 9" and 4 x 9"; 100 grit abrasive sanding sleeve with each spindle. -- Large 24" x 24" precision ground cast iron table mounted on large trunnions that can be tilted 45° down and 30° up by use of a convenient handwheel. -- Complete with: Pedestal style stand.

Heat treated and dynamically balanced 18" aluminum disc. -- Commercial duty 1.5 HP direct drive motor. -- Heavy cast iron 10-1/2" x 24" table w/miter gauge slot. -- Easy precise tilting of the work table with 45° forward and 30° back. -- Rack and pinion adjustment of the table rise & fall and manual tilting of the table. -- Sanding station is mounted to a heavy column. -- Heavy bolt-down cast iron base. -- Optional: Upgrade to a 2 HP motor add.....$240, Miter gauge add.....$270, Rack and pinion movement of the tilt add....$400, Single Phase 1.5 HP motor add.....$120.

Heat treated and dynamically balanced 36" aluminum disc. -- Commercial duty 5 HP motor base mounted with multiple drive belts. -- Heavy cast iron 16" x 46" table w/miter gauge slot. -- Easy precise tilting of the work table with 45° forward and 30° back. -- Rack and pinion adjustment of the table rise & fall and rack and pinion tilting of the table. -- Sanding station is mounted to (4) 3-1/2" heavy columns. -- Heavy bolt-down cast iron base. -- Optional: Motorized table elevation add.....$16, Motorized table elevation with limit switches add....., Electric brake add....., Circular attachment add....., Miter gauge add..... Hoist (chain drive lift for heavy parts) add..... JIL package (oil/dust proof switch components) add.. OPTIONS QUOTED UPON REQUEST.

MAX-PAK - HOE-2850-308AR, ...Horizontal Open-End Auto-Tie BalerSpecifications: -- Bale size: 30″ x 42″ x 72″ (variable) -- Bale weight: Up to 1,400 Lbs -- Cycle time: 15.23 Seconds -- Motor: 30 HP -- Cylinder bore: 8″ -- Rod: 5-1/2″ -- Stroke: 70" -- System pressure: 3,000 PSI -- Platen force: 143,256 Lbs - 120.49 PSIFeatures: -- Automatic Wire Tie System -- Heavy wall tubular steel frame -- AR 400 floor and platen -- Hydraulic regenerative circuit and air/oil cooler -- NEMA 12 Electrical panel and Control System -- Conforms to: OSHA &ANSI Z245.5 Standards

MAXPAK HCE60-FE-8 HORIZONTAL CLOSED DOOR BALER -- 8" Main Cylinder -- 30 HP Motor -- Full Eject -- Includes Infeed

Maxi Mill Quade Scragg with Premium Cab & Controls

1995 McCloskey 621 Trommel Screen -6634 Hours -Tight and dry -Belts are good -Hoses are good -1/2 inch screens Only was used for leaf and compost

1995 McCloskey 833 Trommel -9000 hours -Meter might be faulty -Engine runs strong -Needs -Drum chain -Feed conveyor drive chain -Batteries

2008 McCloskey 412 -2500 hours -New brushes -Fluids been flushed -New coat of paint -Swivel Conveyor -Smaller job trommel

2 DECK 6 X 20 SCALPER

2012 McCloskey I-44 Impact -Around 9K hours -360 Horse Power -41.3 x 44.3 Impact Rotor

2019 McCloskey I34R -1500 hours -950 crushing hours -Track machine -Tight and dry Turn Key unit !!!!

2013 McCloskey J50 Jaw Crushers -10,780 hours -Cat engine -New main belt -Recent replaced tail pulley, rollers -Hopper has been relined Ready to work!!!!!!

(2) McConnell 40-50 MM BTU Gas Burners available

McCormick Inline Metal Detector with Controls

McDonough 54" Resaw Machine was stripped and cleaned, mostly new paint, wheels may need resurfacing (due to sitting).