Equipment For Sale

There are (2) identical machines available. They are brand new, never removed from the crate or plastic. The first photo is of an identical system. The second is how the machines sit right now, ready to load. Multicam Model 3-204 60" x 120" Work area Standard 6" Clearance (2) 7.5 HP Spindles

MULTICAM 3000 SERIES 3-103-R 4 X 8 with ATC:50" x 100" Fixed table, moving gantry machine in a front-to-back configuration with a multi-zone vacuum table supported by a 16.9 HP vacuum system . -- Equipped with:(1) 13.4 HP HSD Routing HSK spindle, variable speed by inverter up to 23,000 RPM with 6-position rear mount tool changer.. -- Full table coverage:On X- & Y-axis, rack & pinion gantry drive with brushless Servo motors using integrated 25 mm linear roller bearing rack system, 6" Z-axis travel via lead screw drive; 1,400 IPM max. cutting feed, 2,500 IPM max. rapid traverse rate on X- & Y-axis. -- Control:The MULTICAM CNC controller is a stand-alone RISC/DSP system. The controller includes a keypad interface with hot keys for repetitious functions and DNC access to host computer. Memory for instant job replay, 32-bit processor, 12 MB RAM & 2 MB flash memory, interprets HPGL and M & G codes, RS-232 interface for PC communication. -- Complete with:16.9 HP vacuum pump, assorted tool holders, PC and manuals.

MULTIQUIP GENERATO MODEL DH-04801 45KW GENERATOR IS ON A 2004 DUOLIFT TRAILER WITH ON BOARD FUEL TANK LOW VERY QUIET GENERATOR

(2) Saws sold as a pair Used for ripping 48" plywood and wafer board Saws can be adjusted anywhere on the shaft. Single Phase motors and variable speed drive motor, 2hp on main shaft.

2018 Multitek 2040XP2 Firewood Processor 2500 hours Circular saw 30' conveyor Stock image. Photos coming soon

4.5 - 7 Cords per hour 100 HP Electric drive 40’ max log length 23” max log diameter 60” circular saw 16-way splitter head cab with joystick controls numerous spare parts Infeed and outfeed included

4.5 - 7 Cords per hour 100 HP electric drive 40’ max log length 23” max log diameter 60” circular saw 16-way splitter head cab with joystick controls Numerous spare parts infeed and outfeed included

Multitek 40KW Generators: 40KW 3-phase 240 volt generators (8 available). All have approximately 27 hours of testing. These are new units available for $16,000 each.

MULTITEK - TRC 460, ...Rim Crusher: ...Less than (300) Hours!Features & Specifications:• Tough MULTITEK® products; simple and strong. Truck Rim Crusher makes wheel salvage easier. • Powered by: Fuel-efficient 25 HP liquid-cooled diesel engine with operator instrument panel control.• The powerful MULTITEK built 6" (15.2 cm) diameter hydraulic cylinder features a Heavy-Duty aluminum piston for continuous duty cycle application.• Power-assisted hydraulic wheel lift arm means less work to load heavy truck wheels.• Powerful 70,000 Lbs (31,752 kG) of crushing force.• Simple: Minimal training and maintenance required.• Standard 2"; ball hitch.• Dimensions: 80" (203 cm) W x 171" (434 cm) L; weight: 3,400 Lbs (1,542 kG).• Engine: Liquid-cooled Diesel with electric start.• Cycle Time: (35) Seconds.

2022 Multitek 2040 XP-2 Firewood Processor, John Deere 125 Turbo Engine, 2,500 Original Hours, Enclosed Cab with Heat and AC, One Owner, Tip Tray, 30' Conveyor, Live Strand Deck, Ready for Work. Weight 15,500 lb Width 8' Length 30' Height 10' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 Multitek 2040XP2 Firewood Processor. Hour meter reads 4,889 hours and has about 100 hours left on factory John Deere 125 HP diesel engine warranty. 60" carbide-tipped circular saw. 16-way box wedge. FWC-30, 30' conveyor. Heat, A/C, radio, & lights.

2014 Multitek Firewood Processor, includes conveyor and tumbler, electric drive. Price Reduced! $60,000 518-410-4486

Electric 3 phase unit Still being uased has a 16 way box wedge Has 3,700 hours heat and AC work. Machine is very clean Does not come with a discharge conveyor.

2015 Multitek 2040XP2 Firewood Processor Cab Circular saw 8 way, 10 way, and block wedges Incline conveyor 9800 hours Using daily

Multitask 2040XP Firewood Processor John Deere 125 HP Diesel Shuttle Grapple 30' Conveyor 60" Carbide tipped circle saw (new teeth) 6 & 8 Way wedges 4-Leg live deck Max log length 40' Max log diameter 23" 35 Ton Splitter

New John Deere motor New clutch New blower motor Grapple support strengthened Most hoses replaced 4-way - 10-way - 12-way splitters 24 foot American conveyor working daily and available for inspection.

MURPHY-RODGERS MRZ 17/16L Interior/Open 6 Bag Dust Collector with Auger and Rotary Air Lock General specs: Approx. 7,600 CFM @ 8" SP. (6) top filter bags @ 24" dia. by 72" long. (6) bottom disposable plastic dust storage bags. -- Fan/Motor: 25 HP BALDOR TEFC motor direct driven fan with electrical starter. 17" diameter inlet, with lifting hooks. The bag collector motor is brand new and has never been powered on or fired up. -- Comes with: Main approx. 17" dia trunk line, shut-off, and Quick clamp removal for filter and plastic bags. -- All steel construction with rugged support legs. Air Deflectors allows operator to adjust the air flow and amount of waste evenly into the 6 waste bags. -- Note: NFPA 664 (Fire Code) states that a max. of 5,000 CFM is limit allowed for indoor enclosure-less dust collectors.

Murphy Rogers MRT-12AS Dust Collector

MURPHY-RODGERS MRSE-24 RAL Dust Collector Loaded with features -- General Data: Self-contained baghouse, approx 15,000 CFM with 1,913 sq. ft. of filter area based on 7.8 to one Air-to-Cloth-Ratio. -- Fan/Motor: 40 HP Baldor motor, 22" dia. inlet, primary separator built into the unit, secondary separation of fine particles by filter bags. -- Equipped with: 16" dia. bottom dump outlet controlled by a Rotary Air Lock with approx. 18" dia. discharge outlet. -- Complete with: (2) Electric motor driven automatic bag shakers, angle frame truck height support stand with walkway platform and full height ladder to access top of unit. Fan/motor mounted on top of the collector -- Includes: Magnetic Starter, Control Panel, Silencer, and Explosion doors. -- Approx. dims.84" x 85" x 32' High; 6,100 Lbs

MURPHY-RODGERS MRJ-610-122 Pulse Jet Dust Collector with Rotary Air Lock and Transfer Fan.Specifications: -- 8,500 CFM approx. @ 9 to 1 air to cloth ratio baghouse dust collector with (60) 10-feet long filters; total cloth area of 943 sq. ft. -- Filter Cleaning: Continuous Self-cleaning Using Compressed Air. -- Main Fan: 30 HP top-mounted blower motor. with approx 18" dia. inlet. --System includes: Relay/Transfer fan, steel structure support stand, low height as waste is transferred by fan, safety ladder/platform, top safety railing, and approx. 16" Rotary Air Lock.Actual model is MRJ 610 -122.