Hogs and Wood Grinders For Sale

JMC McIntyre MODEL 610 24" Alligator Shear The McIntyre 610 is a 24";(610 mm) blade general purpose scrap yard shear which cuts up to 2.5"; (63 mm) plus all usual medium sized structural sections.This industry workhorse has been reconditioned to a high standard, guaranteeing many more years of reliable service.Technical Specifications --Blade length - 24" (610 mm) --Max blade opening - tip to tip 14" (355 mm) --Shearing height - 32" (812 mm) -- 600 VoltCutting control - Lever Automatic / Single Stroke

JWC ENVIRONMENTAL Muffin Monster 3-Shred-H-800 Shredder/GrinderSpecifications: -- Model #: 3-Shred-H-800 - Stainless Steel -- Used only two times -- Stainless steel construction -- Alloy steel drive shafts and scrapers -- Cartridge-style tungsten carbide mechanical seals -- Mill opening:Length: 7 inches Width: 9 inches -- 5 HP motor -- Electrical:230 V 60 Hz Phase 3

Kimwood Grinder with 200HP Electric Motor

LAMB 23x27 inch opening grinder with 150 HP motor, 1 3/8” screen and starter control. 460 volt 3-phase

In good condition. Has 50” opening. No drive motor but would take 100-200HP depending on material being run. No screen included. Very heavy weighs approximately 4 ton.

Jacobson Swing Hammer Mill, Top Infeed, Bottom Discharge, 75HP Electric Motor.

Montgomery Blo Hog S/N 781 ER18" HDGM Drop Feed w/75HP Motor

Montgomery Blo-Hog, drop feed Steel Flywheel for surge loads Top infeed opening: 18 ¼ X 13 1/4” Bottom discharge Will be repainted Model: ER 18S315FHDL Serial # 1032 75 hp motor. 230/460V, frame: 405T, Support stand Extra parts Contact us for a delivered price

Montgomery Blo-Hog model: 1540-18 HD-BHL s/n: 1581

Montgomery 100 HP Hammer Mill Includes: Outfeed conveyor and Infeed Hopper

2021 Morbark 6400XT Track Horizontal Grinder C32 Cat diesel with 1890 hours, Cat platinum warranty 5 years or 8000 hours. 42" x 61 3/8" Hammermill System w/ 28" diamter rotor and 1" thick rotor plates 40" diameter feed roll Dust Suppression System Hydraulically operated debris containment door Rod Puller 325L GD CAT undercarriage with double grouser pads, Ready to Grind… Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Morbark 3400XT Wood Hog Horizontal Grinder CAT C18, 765 Hp engine Approx 2100 hours New belly belt/skirting; Rebuilt mill Engine has new cylinder sleeves with rod & main bearings, purge pump & hydraulic fan motor (replaced by manufacturer due to a defect) Remote Magnet 1” & 5” screens Great machine and ready to go to work

2022 Morbark 3000XT Horizontal Grinder -180 hours -575 hp CAT engine -Remote -Still under warranty NEW NEW NEW

2018 Morbark Model 4600XL Track Horizontal Grinder, Engine is a Caterpillar C-27 1050 HP Engine. Has 2,400 Hours of Running Time and 1,000 Hours Idling time, Undercarriage is 95%, Wireless Remote Control, Air Compressor, Metal Pully on Discharge Conveyor, Various Screen Sizes Ready to Work. Gross weight: 88,640 lbs. Length: 45” Height: 11’11” Width: 11’3” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Morbark 4600xl Horizontal Grinder, Cat 1050hp, 6952 hours, Radio Remote, Magnetic Head Pulley. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Morbark 4600XL Track Horizontal Grinder, Cat 1050hp 8003 hours, Pt tech clutch, Radio Remote, Magnetic Head Pulley. Weight 88,640 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

For all types of wood waste, brush, pallets, stumps, trees. the Morbark 3200 Wood Hog is a compact and aggressive horizontal grinder. Factory installed caterpillar C-15 Tier 3 engine producing 540 hp. The 3200 can handle green waste, regrind, sawmill residue, pallets, and logs up to 14” in diameter with ease. The in Feed System is Internal planetary drive with no chains and sprockets means lower maintenance, more torque and better durability. Discharge System - 36? x 26’7? stacking discharge conveyor has hydraulic fold for transport. Morbark Integrated Control Systems (MICS) - Automatically adjusts feed rates and monitors pressures and feed wheel position to maximize production and engine efficiency. Hammermill - Laser-cut upturn rotor, factory balanced with forged hammers, offers unsurpassed durability and smooth operation. This unit is trailer mounted Financing and transportation available. Call or text Mike 5414807045

2018 Morbark 1300B -3800 hours -C-27(1050H.P) -Tight and dry -Has grinded mostly soft wood its whole life Turn Key Unit Ready to Work !!!!!