BioMass Equipment For Sale

2015 Morbark Model MR20 Brush Chipper, Engine is a Caterpillar 325 HP with 9,700 Hours, Autofeed System,, Tandem Axle with Hydraulic Tongue Jack, UCC Lights, Electric Brakes Ready for Work. Length 26'8" Height 11' Width 8' Gross Weight 18,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Morbark 1821 Brush Chipper, Gas, Hydraulic Winch, One Owner Trade In.

2004 Morbark 50/48 Whole Tree Drum Chipper. 11,000 hours on a rebuilt 3412 CAT engine with 760HP, Auto Feed, Fire Suppression, Radio Remote and Tether cord. Machine was repainted. Length 40'8.25" Height 12'6" Width 9'9" Gross Weight (approx.) 72,120 lb

1994 Morbark Model 1200WCL Tub Grinder, Caterpillar 3412 Engine, hours unknown, Joystick Controls, Square Wear Plates, Enclosed Cab with Heat, Clutch replaced recently, 4" Screen and 2" Round Secondary Screens. Length 36 ft 0 in Width 11 ft 11 in Height 13 ft 6 in Weight 50,020 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Morbark Typhoon 20 Drum Chipper, John Deere 325hp with 5,000 hours, Winch, Hydraulic Jack, Hydraulic Turn Discharge. Weight: 4,500 LBS Length: 18' Width: 8' Height: 8'6” Weight: 9,000 Lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Morbark 6600 Wood Hog Horzontal Grinder, 8461 frame hours, New Cat C32 1200hp engine 1000 hours ago, New C32 was installed at 7500 hours, PT tech hydraulic clutch, Magnetic head pulley, Radio remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Morbark 6600 Wood Hog Horzontal Grinder, Cat C32 with 8400 hours, Parked it 6 months ago. It ran until it was parked. Remote works. Known issues: Needs muffler Needs pto O ring Under side of yoke needs to be cut out and new plate put in. It ran till the day they cut it off so I’m sure they can get it running fairly quick. Needs a good amount of welding work under the yoke and around the mill. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Morbark 4600XL Horzontal Track Grinder, Cat C27 with 7,500 hours, Magnetic Head Pulley, Radio Remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Morbark 3800XL Caterpillar C18 – 700hp 5807 machine hours. Recent rebuild on the Cat engine. New mill components.

2015 Morbark 1300B Track -10,400 hours -C27 No Blow by -One owner machine -Uc is in good condition -Had recent mill work completed Ready to Grind !!!!!!

MTB BDV-1200 SHREDDER --Specifications Per Manufacture's Information --ROTOR Length: 1200 mm (47.2 INCH) Diameter: 416 mm (16.4 INCH) -- 150hp 460 volts -- The unique features of our BDR shredders allow for the most efficient size reduction of difficult material types at the lowest operating costs on the market -- Includes Stand and Hopper

MULTITEK - TRC 460, ...Rim Crusher: ...Less than (300) Hours!Features & Specifications:• Tough MULTITEK® products; simple and strong. Truck Rim Crusher makes wheel salvage easier. • Powered by: Fuel-efficient 25 HP liquid-cooled diesel engine with operator instrument panel control.• The powerful MULTITEK built 6" (15.2 cm) diameter hydraulic cylinder features a Heavy-Duty aluminum piston for continuous duty cycle application.• Power-assisted hydraulic wheel lift arm means less work to load heavy truck wheels.• Powerful 70,000 Lbs (31,752 kG) of crushing force.• Simple: Minimal training and maintenance required.• Standard 2"; ball hitch.• Dimensions: 80" (203 cm) W x 171" (434 cm) L; weight: 3,400 Lbs (1,542 kG).• Engine: Liquid-cooled Diesel with electric start.• Cycle Time: (35) Seconds.

NAZZARENO OL.D. 201 M Briquette Press (Log Maker)Produces a 2.8" (70 mm) dia. briquette (endless production);Specifications: -- 265 - 330 Lbs/Hr (120 - 150 kG/Hr) capacity, 14.8 HP (11 kW) main motor. -- A horizontal feed screw provides a continuous and constant load for each press cycle.Features: -- Pistons (loading and compression), compression heads, extruders, and oversized piston clamping assemblies to ensure a high quality briquette and a long operating life of the machine. -- The OL.D 201 M system is a 2-part machine - the Press and the Mini Silo. The Mini Silo can be replaced with other storage systems. Silos of any size can be attached to this machine! Complete with: -- Mini silo, hydraulic control unit, cooler and PLC control.Includes: -- Step-down transformer.

NEWMAN - SS-24, ...Wood Shaving Mill -- Motor: 100 HP. -- Feed Opening: Up to 5" thick x 14" wide. -- Cutterhead: 24" Dia. x 14" width. -- Knives: (16) Per row x (7) rows; total: (112) knives. -- Some extra knives included. -- Loaded onto your truck.

Nice Newman G-280 tub grinder. Everything functional just needs cleaned.

Nice Newman G-280 that has been refreshed. Has extra cylinder wheels that come with it.

Very clean Newman G-200 Knife grinder. In good working order, grinds 17" on the inside and 20" on the outside.

Nicholson Flat Drum Chipper 9'5' x 55" Includes: Trailer, AC power, belt conveyor, switch gear option. System chipped just over 120 truckloads

Complete Chip Mill that is ready to be moved System includes: - Log Deck - Log Singulator - Control Room - Nicholson A5 Debarker - Peeled Log Outfeed Bin - Reclaim Log Infeed Deck - Bark conveyor and stacker - Bark Shredder - Progress 84" 6 Knife Chipper w/ 600 HP Motor - Progress Chip Screen: 7'x14' - Chip Blower and Truck Loading Conveyor - MCC Center

NOVA PELLET N-Eco Pellet Plant;Complete Wood Pellet Manufacturing Plant including Dryer and Bagging Line: -- Capacity: 770 - 1,1212 Lbs/Hr (350 - 550 kG/Hr). -- Raw Material: Wood chips, sawdust, wood shavings. -- Power: 174 HP (130 kW) Installed, 148 HP (110 kW) average.The Pellet Plant consists of the following main components: -- Wood Chip Hopper: 110 cu. ft. (3 cbm) volume; includes: Discharge Screw, Motor. -- Rotary Drum Dryer: 770 - 1,100 Lbs/Hr (350 - 500 kG/Hr) dry material capacity, moisture reduction from ...40 - 50% to 14%; includes: Cyclone, Rotative Valve, Electrical Cabinet with PLC. -- Biomass Burner: Approx. 220 Lbs/Hr (100 kG/Hr) Wood Chips, max. ...25% moisture content. -- Magnetic Separator. -- Hammer Mill: 770 - 1,320 Lbs/Hr (350 - 600 kG/Hr) dry material capacity, 40 HP (30 kW) installed power, 0.78" x 0.78" x 0.2" max. grain size. -- Dry Chip Silo: 180 Cu/ft. (5 cbm) volume, 83" (2,100 mm) diameter, 264" (6,700 mm) height; includes: Dust Filter, Pulse Jet Cleaning System, Safety System with Spark detection, Rotative Valve. -- Pellet Mill (Type: N-ECO): 770 - 1.320 Lbs/Hr (350 - 600 kG/Hr) capacity, 60 HP (45 kW) main drive; includes: (1) x Die, (2) x Rollers, Electrical Cabinet with PLC. -- Packaging Line (Type: N-Pack): Manual operated line includes: Vibrating Screen, Conveyors, Storage Hopper, Pneumatic Valve, 15 kG Bags. -- Auxiliary equipment: Conveyors, Ducts for Dedusting, etc. -- Shipping to US port, Mechanical & Electrical installation, start-up, and training included.NOTE: Price and delivery terms will have to be reviewed and confirmed at the time the order is placed.