Hogs and Wood Grinders For Sale
Category
Hogs and Wood Grinders
200 Results Found
$ 87,500
SSI - M-70-E, ...Dual Shaft, Low-Speed, High Torque ShredderEffective in bulky item reductio; product destruction or preconditioning (primary shredding) where output particle size variation is acceptable. Output consists of strips the width of the cutters (usually 1" - 3").Equipped with: -- 60 HP Drive motor; cutting chamber 29" x 40"; hopper opening 55" x 67"; cutting disc diameter 14.4"; cutting disc thickness 1-1/2". -- Auto reversal protects components; advanced bearing protection system assures longevity. -- Suitable for: Wood, plastics, electronic scrap, medical waste, textiles, and tires.
SSI Model - 1200-E, Slow Speed, High Torque ShredderSpecifications: -- 50 HP Motor; twin shafts with (27) 2" knives on each shaft; 52" x 22" chamber opening; 12-1/2" cutter dia., 1" thick; 25" x 58" bottom discharge.Includes: -- Stand, feed hopper; controls with spare 100 HP motor. -- Total footprint: 145" long x 4' wide x 55" stand height. -- Excellent for e-Waste/e-Scrap; tires, rubber, plastics, metals, hard drives, wood products, batteries, and large pieces of material.
$ 77,900
SSI - SR-375H, ...Uni-Shear Shredder -- Singler rotor Shredder -- Main Motor: 150 HP. -- Hydraulic Ram Motor: 25 HP. -- Feed Opening: 49" W x 77" L. -- Soft Start. -- Speed: Medium. -- Ram: Hydraulic. -- Screen: 3" W x 6" L. -- Extra Set of new teeth (not installed). -- Ideal for: Wood, Paper, Plastics, and other brittle materials. -- Owner was shredding only plastic pails.
$ 135,000
SSI - 2400H, ...Mobile Tire ShredderSpecifications: -- Chamber Size: 60" x 40" -- 200HP Hydraulic Driven -- Mobile Shredder
Call for Price
STRIPTECH MODEL 200 8" Alligator Shear Description -- Model 200 --Blade Length 8" --Motor Size 3 HP --Foot Pedal Control Automatic/ Single Stroke
Call for Price
STRIP-TECH MODEL 3000 Wire Stripper --Motor: 3 HP, 220 or 440 volts, 3 phase --Drive: Gear Driven --Feed: Auto Feeding --Production: Approx 100 ft/minute --Machine Height: 37″ --Machine Length: 46″ --Machine Width: 18″ --Leg Construction: 2.00″ tube --Machine Wt: 580 lbs. --Wire Size: 1/8 to 3 inch O.D.
$ 8,950
SWEED MODEL 517 SCRAP CHOPPER With Dump HopperFeatures: --The Model 517 XHD provides a large cutting capacity. This is the chopper of choice for custom applications or for operations converting substantial quantities of linear scrap materials. Prepared for an abusive environment, the 517 XHD has a strong 1/2” plate steel housing. The 517 XHD also features a magnetic starter to protect workers from an unexpected restart after loss of power. The powerful air activated feedworks is controlled with a footswitch for operator safety, and is also capable of despooling scrap wire and cable from reels. --Additional safety options are available. Material Reference The recommended model of scrap chopper is determined by scrap size, scrap volume, and requested custom features. Please consult a SWEED representative to determine the appropriate scrap chopper for your application.» High-tensile bale wire» Small, solid, aluminum and copper bars» Jacketed and non-jacketed wire and cable» For other materials, consult SWEED --Electric Motor 5 HP --Infeed Opening 6 ” W x 1 ” H Cut Length 3 ½” standard (smaller cut lengths available with different knife configurations) --Number of Stationary Knives 1 --Number of Rotating Knives 1 standard --Overall Chopper Dimensions 56” L x 34” W x 30” H --Chopper Weight 1,492 lbs --Chopper Shipping Weight 1,577 lbs -- Include Stand and Gaylord
Call for Price
TANA- SHARK 440DT, ... Portable Dual Shaft ShredderSpecifications: -- Approx 3900 Hours and New in 2015 --Bolt-on cleaning combs for easier maintenance --Magnet conveyor improvements - Discharge side to be selected from TCS + hydraulic magnet adjustment during operation --Rated power (SAE J1995) 399 kW (535 bhp) @2100rpm --Nominal torque 324,530 ft-lbs 440 kNm --Rotor length 9 ft 10 in --Number of rotor knives 33 / 44 --Screen sizes Available from Tana- 1.9", 3", 3.5", 3.9", 4.3", 4.7", 5.5", 6.6", 8.7", 10.8" --Screen area 29.6 sq ft
Call for Price
100HP Single Shaft Shredder With Infeed and Discharge ConveyorsSpecifications: --100 HP --Includes Infeed Conveyor- 50" Wide x 37’6” Long, Sides 20” high --Includes Discharge Conveyor - 47" Wide x 16' Long
$ 5,000
Jay-Bee hammer mill/ waste grinder, 13" x 19" inlet size, 5/16" screen, no power, good condition
$ 6,300
Roberts hammer mill/ waste grinder, top feed, 60 hp electric drive, 3600 rpm's, good working condition
WWCS EB 100 Shredder, can be used on pallets. 2 - 100 HP 240 - 480 v 3 phase. Includes controls. This is a parts machine. Has 2 DRVE reduction gears, hydraulic. Needs some TLC. Call 800-459-2148 for more info.
Call for Price
UNTHA RS40-1000-37 QUAD SHAFT SHREDDER -- 1000 mm (39") cutting chamber -- (2) 30 HP motors -- 480 volts UL controls -- Wear lined, cast steel sidewalls -- 29 mm cutting system with 2 tooth main cutters -- Mechanical seals -- 60 mm screen with Hardox baskets -- Shimmed screen for position control -- Automatic central lubrication -- Quick change screen -- Brand new with warranty -- Loaded on your truck
The Vantec Wood Wast Drum Chipper is used to produce chips from logs and veneer waste. It has a roller infeed system, rubber conveyor belt and hydro-pneumatic unit to lift the rotor for maintenance. Manufacturer specs: - Width of inlet: 600 mm; - Height: 200 mm; - Rotor diameter: 600 mm; - Toothed roller: 01 upper and 02 - lower; - Grooved rollers: 01; - Rollers gear motor: GD (helical - gears); - Upper Rollers motor size: 5 hp; - Upper Rollers motor size: 5 hp; - Feed speed: 40m/min; - Number of rotor knives: 02; - Wood chip size: 30 - 40 mm; - Chipper screen: size: 65 x 65mm - Main motor 100 hp 4P: Included; Drive panel: Included; - Estimated production: 38 m3 / h (it may vary according to the type of material and time used with blade sharpening); - Infeed conveyor length: 3 500 mm (included); - Width: 1 650 mm; - Height: 1 .000 mm; - Overall length: 5800 mm; Approximate weight: 2,900 kg.
This Wood Drum chipper PT600 is used in production of wood chips from logs and veneer waste. It has a toothed roller system that allows efficient material infeed, a rubberized conveyor belt and a Hydropneumatic unit to lift the rotor cover for maintenance. It comes with 01 chipper Knife set and 01 nose bar set. It does not come with the output conveyor. - Width of inlet: 600 mm; - Height: 300 mm; - Rotor diameter: 800 mm; - Toothed roller: 01 upper and 01 lower; - Grooved rollers: 01; - Rollers gear motor: GD (helical gears); - Metal detector: Flat model; - Rollers motor size: 5 hp (2x); - Number of rotor knives: 02; - Wood chip size: 25 - 40 mm; - Main motor 125 hp 4P: Included; - Drive panel: Included; - Lead Time: 240 Days; - Estimated production: 55 m3 / h (it may vary according to the type of material and time used with blade sharpening); - Infeed conveyor length: 3 500 mm (included); - Width: 1 850 mm; - Height: 1 .150 mm; - Overall length: 6 700 mm; - Approximate weight: 4,900 kg.