Equipment For Sale

2013 Morbark 6600 Wood Hog Horzontal Grinder, Cat C32 with 8400 hours, Parked it 6 months ago. It ran until it was parked. Remote works. Known issues: Needs muffler Needs pto O ring Under side of yoke needs to be cut out and new plate put in. It ran till the day they cut it off so I’m sure they can get it running fairly quick. Needs a good amount of welding work under the yoke and around the mill. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Mobark Rosserhead Debarker Model 636 Currently in use

Morbark PS-8 Post Peeler, 50HP electric motor, very good condition. $49,000 715-613-6252

2012 Morbark 3800XL Caterpillar C18 – 700hp 5807 machine hours. Recent rebuild on the Cat engine. New mill components.

2015 Morbark 1300B Track -10,400 hours -C27 No Blow by -One owner machine -Uc is in good condition -Had recent mill work completed Ready to Grind !!!!!!

1994 Morbark Model 1200WCL Tub Grinder, Caterpillar 3412 Engine, hours unknown, Joystick Controls, Square Wear Plates, Enclosed Cab with Heat, Clutch replaced recently, 4" Screen and 2" Round Secondary Screens. Length 36 ft 0 in Width 11 ft 11 in Height 13 ft 6 in Weight 50,020 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Morbark Typhoon 20 Drum Chipper, John Deere 325hp with 5,000 hours, Winch, Hydraulic Jack, Hydraulic Turn Discharge. Weight: 4,500 LBS Length: 18' Width: 8' Height: 8'6” Weight: 9,000 Lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Cat C.88 liter engine, 3525 hr. In good working Condition CALL 641-898-7334

1993 Morbark Model 1200 Tub Grinder, Equipped with a Cummins 650 HP Engine, Autofeed, Wireless Control, New Clutch 1 year ago, Hours are Unknown, New Turbo, New Injectors 300 Hours ago, Ready to Work. Weight 55,622 lb Length 38.15 ft Width 11.9 ft Height 12.8 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

628 Morbark Debarker (for Poles) with chop-to-length system and sorter. Located in SD. #C947

2018 Morbark Model 4600XL Track Horizontal Grinder, Engine is a Caterpillar C-27 1050 HP Engine. Has 2,400 Hours of Running Time and 1,000 Hours Idling time, Undercarriage is 95%, Wireless Remote Control, Air Compressor, Metal Pully on Discharge Conveyor, Various Screen Sizes Ready to Work. Gross weight: 88,640 lbs. Length: 45” Height: 11’11” Width: 11’3” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

CAT V12E, 750HP DIESEL, FOLDING DISCHARGE CONVEYOR, HYDRAULIC REVERSING FAN, AND TRI-AXLE CARRIER. IN GOOD CONDITION.

2021 Morbark 1821 Brush Chipper, Engine Ford 170HP Gas Engine, Hydraulic Winch, 2-1/2" Pintle Hitch, UCC Lighting, ONLY 187 Original HOURS , Ready for Work. Height 8'11" Width 7'3" Length 18'1" Gross weight (approximate) 8,900 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1998 Morbark 2400 Chipper, ONLY 1800 Original Hours, Perkins 185 HP Turbo Diesel Engine, Hydraulic Tongue Jack, Hydraulic Lift Assist Cylinder, Twin Disc SP 211 Clutch, Tires are at 50%, In Excellent Condition. Two Owner Machine, Ready for Work. Weight: 15,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Morbark 1821 Brush Chipper, Gas, Hydraulic Winch, One Owner Trade In.

Pintle Hitch 4800 Hours Year To Be Confirmed

C-24 Morbark Constellation post/pole peeler being rebuilt, many new parts. Comes with infeed and outfeed conveyors. Two-2 strand decks are also included. Asking $75,000

2006 Morbark 6600 Horizontal Grinder, one owner. 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Morbark 40/36 Drum Chipper -1500 hours -C-18 CAT -Deleted -Clean Unit

2018 morbark M20R whole tree chipper -420HP c9 cat motor -1258hrs -312 cat undercarriage -27,000 lbs -22”x28” throat -Wireless remote and tether remote -360 degree chip shoot -Has the two sides 6 knife drum -Comes with alot of spare knifes -Reenforced thicker metal on the infeed -Feed bed chains -Auto feed