Equipment For Sale

Cat 3412E 860hp Engine status report shows 43% average load factor, 3317 idle hours. 8899 hours on original engine. Completely serviced and runs properly. Morlift 500 loader with tight grapple, A/C cab all nicely fitted. Auxiliary air compressor Michigan model 40 knife grinder Extra knives Very sound, tidy chipper throughout. Call for complete condition report.

-400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back

Morbark Chip Blower with 40HP Electric Motor

X5 Author cnc router 11KW/15HP 5 axis electrospindle router motor Spindle takes HSK63 tool holders 120” x 51.2” working area Max speed in X/Y/Z – 131/131-/74 FPM Remote pendant 18 spindle boring unit with 12 vertical (7+5) and six horizontal (2+2, 1+1) 12 position rear tool changer Centralized dust collection See less

MORBIDELLI U 550 CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Worktable area "X" axis 126" (3,200 mm); "Y" axis 51" (1,300 mm),;"Z" axis stroke 4.52" (115 mm); max. material thickness 3.1" (80 mm). -- Positioning Speed:"X" & "Y" Axes are192 FPM (58 MPM); "Z" axis 80 FPM (24 MPM). -- Worktable:(8) Adjustable panel supports with (3) vacuum pods per support.(8) Pneumatic backstops, (2) pneumatic side stops & (2) pneumatic center stops; (2) independent work zones. -- Boring Unit:(1) 4 HP (3 kW) - 4,000 RPM Motor; (29) independent vertical spindles at 32 mm centers with (14) vertical spindles in "X" axis & (15) vertical spindles in "Y" axis.(6) Horizontal spindles with (3 + 3) in the "X" axis. -- Machining:(2) 9 HP (6.7 kW) Routers with: ISO 30 Adaptors; variable speed from 12,000 - 18,000 RPM.(1) 5-Position tool racks mounted on the LH side of the machine base for ATC. -- Operator & Machine Control:Separate control cabinet with: "TRIA 7500" CNC 32-Bit multiprocessor (100% MS/DOS compatible), 512 KB user RAM.14" VGA Color monitor; ergonomic extended keypad with (18) function keys; 1.44 MB floppy disk drive & (2) RS 232 & (1) RS 242 serial ports. -- Complete with:(1) 100 cbm/Hr Vacuum Pump; working head safety enclosure; emergency stop rope. -- Actual Model is: MORBIDELLI - U 550.

This machine was purchased new. The seller has changed contracts and no longer needs the system for their application. 2019 Morbidelli P200 5 X 12 Contour Edgebander Eye M Controller with 21.5? Touch Screen Hand Held Pendant w/ 7? Touch Screen Air Conditioned Cabinet 20.5 HP Liquid Cooled Router Tool Touch Probe 12 Position Ride Along Tool Changer 14 Position Side Tool Changer 17 Vertical Spindles 8 Horizontal Spindles / 3+3 in X and 2+2 in Y Hinge Unit Edgebanding Unit Standard two Coils Magazines on Safety Enclosure Additional Support for 6 Coils EVA or PUR Glue Aggregates for 3mm PVC Flexmatic Table with 8 Rails 8 Lifting Rails Variety of Vacuum Pods HE Pods Conveyor for Dust Busch Mink Vacuum Pump Pro Speed w/ Safety Enclosure

MORBIDELLI AUTHOR 504 R CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Working Cap. "X" Axis 139-3/8" (3,540 mm); "Y" axis 48-3/8" (1,230 mm) for routing & 39.6" (1,008 mm) for boring; "Z" axis 3.1" (80 mm). -- Positioning Speed:"X" Axis 213 FPM; "Y" axis 131 FPM; "Z" axis is 65 FPM. -- Worktable:(8) Adjustable panel supports each with: (3) Vacuum pods; worktable setup for (2) independent working areas. -- Boring Unit:(29) Independent vertical boring spindles forming a T-configuration with: (15) Spindles on the "X" axis and (14) spindles on the "Y" axis.A total of (8) horizontal spindles with: (3 + 3) on "X" Axis; (1 + 1) on "Y" axis. -- Machining:(1) 9 HP (7 kW) Vertically mounted router; inverter driven (FUJI) at 12,000 - 18,000 RPM.(1) 8-Position ATC for Automatic Tool Changer. -- Operator & Machine Control:"NUM CN" Loaded onto a HP, PC Based Controller mounted in separate control cabinet.15" VGA Color monitor and ergonomic keypad. Remote Control Pendant: Allows the operator to move around and still control all the axis movements, speed, and emergency stop.Includes: USB Ports; (2) serial ports RS-232 & RS-242 (requires no 3rd party CAD system for downloading programs). XILOG-PLUS OPERATOR Interface: Offers incredible list of: Functions from (a) Auto. diagnostic to (z) zooming; controlled acceleration & deceleration, encoder feedback, dynamic tool correction via PLC due to active tool wear using space-and-time criteria; programs can be transferred via diskette or downloaded by wire. Equipped with: Onboard mini-CAD with built-in programming for writing circles, ellipses & angles with only a few keystrokes; on-board cycle optimization, on-board calculator, mirror imaging, and repeat imaging. -- Complete with:(1) 100 cbm/Hr Vacuum Pump. -- Actual model is: MORBIDELLI - Author 504 .

Morbidelli Planet P800 CNC Router

MORBIDELLI U 550 CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Worktable area: "X" Axis 126" (3,200 mm); "Y" axis 51" (1,300 mm); "Z" axis stroke 4.52" (115 mm); max. material thickness 3.1" (80 mm). -- Positioning Speed:"X" & "Y" Axis are 192 FPM (58 MPM); "Z" axis 80 FPM (24 MPM). -- Worktable:(8) Adjustable panel supports with (3) vacuum pods per support.(8) Pneumatic backstops; (2) pneumatic side stops & (2) pneumatic center stops; (2) independent work zones. -- Boring Unit:(1) 4 HP (3 kW) - 4,000 RPM Motor; (29) independent vertical spindles at 32 mm centers with: (14) Vertical spindles in "X" axis & (15) vertical spindles in "Y" axis.(6) Horizontal spindles with (3 + 3) in the "X" axis. -- Machining:(2) 9 HP (6.7 kW) Routers with: ISO 30 Adaptors; variable speed from 12,000 - 18,000 RPM.(1) 5-Position tool rack mounted on the LH side of the machine base for ATC. -- Operator & Machine Control:Separate control cabinet with: "TRIA 7500" CNC 32-Bit multiprocessor (100% MS/DOS compatible); 512 KB user RAM,14" VGA Color monitor; ergonomic extended keypad with (18) function keys; 1.44 MB floppy disk drive & (2) RS 232 & (1) RS 242 serial ports. -- Complete with:(1) 100 cbm/Hr Vacuum Pump; working head safety enclosure; emergency stop rope. -- Actual Model is: MORBIDELLI - U 550.

Morgan Mini Scragg - Set up for single engine. Independent arbors. Manual Setworks. 40” Saw #C953

Morgan In Line Deduster

15 HP. Electric motor on the blade. 1.5 hp. On the infeed drive. It has a new infeed belt and painted. In good condition. Call for more info 918-752-8142

1 with a return belt. 1 without lineshaft,no hyd. or air. Wheels in need of crowning but in working condition.Edger 4"x 36" 2 blade 1 movable 6'in & out deadroll,lineshaft working condition. You have the option to buy both resaws or just one. Joe Yoder 1741 Soldier Rd. Fort Scott, Kansas 66701

MORGAN "3-Head" Multi Blade trim saw: -- Equiped with:(3) 10 HP motors, 10'capacity 5'6" thick with Disconnects & Controls

Morgan Slab Saw w/30HP Motor

Morgan 2 Head Resaw 12 x 12 Grade 480 Volt 3 Phase with 50HP Motors, On board HPU. 4" Bands.

Morgan Scragg Mate Edger 20hp on Saw Arbors

Morgan Mini Champ 4 Saw Edger

Morgan 2 Saw Edger

New Morgan 20’ Chop Saw. Includes Descrambler and scrap conveyor. 15HP saw